Re: [PATCH] ARM: at91/dt: ov2640: add hsync/vsync-active property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Le 18/09/2015 13:28, Josh Wu a écrit :
> On at91sam9x5ek/at91sam9m10g45ek/sama5d3xek boards, we use the parallel
> connection for ov2640. So we must set the hsync/vsync property (1 means
> active high).
> Otherwise, the connection would be seen as BT.656 or BT.1120.
> 
> Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx>

Hi Josh,

Does this patch apply because of the new enhancement that you had
proposed in "media: atmel-isi: parse the DT parameters for
vsync/hsync/pixclock polarity" or does it apply even before?
Is it a fix that applies to older kernels?

So, should I wait for the enhancements to enter media git tree or can I
take them anyway?

Bye,

> ---
> 
>  arch/arm/boot/dts/at91sam9m10g45ek.dts | 2 ++
>  arch/arm/boot/dts/at91sam9x5ek.dtsi    | 2 ++
>  arch/arm/boot/dts/sama5d3xmb.dtsi      | 2 ++
>  3 files changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> index d1ae60a..9d16ef8 100644
> --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> @@ -198,6 +198,8 @@
>  					isi_0: endpoint {
>  						remote-endpoint = <&ov2640_0>;
>  						bus-width = <8>;
> +						vsync-active = <1>;
> +						hsync-active = <1>;
>  					};
>  				};
>  			};
> diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
> index d237c46..479f200 100644
> --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
> @@ -66,6 +66,8 @@
>  					isi_0: endpoint@0 {
>  						remote-endpoint = <&ov2640_0>;
>  						bus-width = <8>;
> +						vsync-active = <1>;
> +						hsync-active = <1>;
>  					};
>  				};
>  			};
> diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
> index 83bee7a..8901042 100644
> --- a/arch/arm/boot/dts/sama5d3xmb.dtsi
> +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
> @@ -87,6 +87,8 @@
>  					isi_0: endpoint {
>  						remote-endpoint = <&ov2640_0>;
>  						bus-width = <8>;
> +						vsync-active = <1>;
> +						hsync-active = <1>;
>  					};
>  				};
>  			};
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux