On 09/18/2015 12:30 PM, Simon Guinot wrote:
On Fri, Sep 18, 2015 at 11:16:41AM +0200, Jacek Anaszewski wrote:
Hi Simon,
Please find my comments in the code below.
Hi Jacek,
Thanks for the quick review.
You're welcome.
On 09/17/2015 05:59 PM, Simon Guinot wrote:
This patch adds device tree support for the netxbig LEDs.
This also introduces a additionnal DT binding for the GPIO extension bus
(netxbig-gpio-ext) used to configure the LEDs. Since this bus could also
be used to control other devices, then it seems more suitable to have it
in a separate DT binding.
Signed-off-by: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
.../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
.../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
drivers/leds/leds-netxbig.c | 258 +++++++++++++++++++--
include/dt-bindings/leds/leds-netxbig.h | 18 ++
4 files changed, 369 insertions(+), 21 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
create mode 100644 include/dt-bindings/leds/leds-netxbig.h
Changes for v2:
- Check timer mode value retrieved from DT.
- In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
timer delay values from DT with function of_property_read_u32_index.
Instead, use a temporary u32 variable. This allows to silence a static
checker warning.
- Make timer property optional in the binding documentation. It is now
aligned with the driver code.
Changes for v3:
- Fix pointer usage with the temporary u32 variable while calling
of_property_read_u32_index.
Changes for v4:
- In DT binding document netxbig-gpio-ext.txt, detail byte order for
registers and latch mechanism for "enable-gpio".
- In leds-netxbig.c, add some error messages.
- In leds-netxbig.c, fix some "sizeof" style issues.
- In leds-netxbig.c, in netxbig_leds_get_of_pdata(), move the
of_property_read_string() calls after the error-prone checks.
- Add some Acked-by.
...
+#ifdef CONFIG_OF_GPIO
+static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np,
+ struct netxbig_gpio_ext *gpio_ext)
+{
+ int *addr, *data;
+ int num_addr, num_data;
+ int ret;
+ int i;
+
+ ret = of_gpio_named_count(np, "addr-gpios");
+ if (ret < 0) {
+ dev_err(dev,
+ "Failed to count GPIOs in DT property addr-gpios\n");
+ return ret;
+ }
+ num_addr = ret;
+ addr = devm_kzalloc(dev, num_addr * sizeof(*addr), GFP_KERNEL);
+ if (!addr)
+ return -ENOMEM;
+
+ for (i = 0; i < num_addr; i++) {
+ ret = of_get_named_gpio(np, "addr-gpios", i);
+ if (ret < 0)
+ return ret;
+ addr[i] = ret;
+ }
+ gpio_ext->addr = addr;
+ gpio_ext->num_addr = num_addr;
+
+ ret = of_gpio_named_count(np, "data-gpios");
+ if (ret < 0) {
+ dev_err(dev,
+ "Failed to count GPIOs in DT property data-gpios\n");
+ return ret;
+ }
+ num_data = ret;
+ data = devm_kzalloc(dev, num_data * sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ for (i = 0; i < num_data; i++) {
+ ret = of_get_named_gpio(np, "data-gpios", i);
+ if (ret < 0)
+ return ret;
+ data[i] = ret;
+ }
+ gpio_ext->data = data;
+ gpio_ext->num_data = num_data;
+
+ ret = of_get_named_gpio(np, "enable-gpio", 0);
+ if (ret < 0) {
+ dev_err(dev,
+ "Failed to get GPIO from DT property enable-gpio\n");
+ return ret;
+ }
+ gpio_ext->enable = ret;
+
+ return 0;
+}
Since netxbig-gpio-ext extension bus can be also used to control other
device, and the related DT bindings are meant for GPIO subsystem, then
the above parser should also be placed there to make it available
for reuse by other drivers. The gpio_ext_init function should be also
moved to GPIO subsystem, presumably to the same module.
Yes, this patch series is a first step. I am planning to move the
netxbig-gpio-ext extension bus into a dedicated driver as soon as I need
need it for an another device/driver. But for the time being, I was
planning to keep it here. If you agree with that of course.
ack.
Moreover, if you switched to using devm* prefixed version of
gpio_request_one and led_classdev_reqister, you could simplify
the error paths in the driver.
Yes, I have a pending patch for this conversion. But since it is not
really related with the subject of this patch series (add DT support),
I was planning to send it next.
Do you want me to include this patch into this series.
Why not, if you have it ready to go. If it needs some polishing,
we can live with what we have now.
+static int netxbig_leds_get_of_pdata(struct device *dev,
+ struct netxbig_led_platform_data *pdata)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *gpio_ext_np;
+ struct device_node *child;
+ struct netxbig_gpio_ext *gpio_ext;
+ struct netxbig_led_timer *timers;
+ struct netxbig_led *leds, *led;
+ int num_timers;
+ int num_leds = 0;
+ int ret;
+ int i;
...
+ led = leds;
+ for_each_child_of_node(np, child) {
+ const char *string;
+ int *mode_val;
+ int num_modes;
+
+ if (of_property_read_u32(child, "mode-addr",
+ &led->mode_addr))
+ return -EINVAL;
+
+ if (of_property_read_u32(child, "bright-addr",
+ &led->bright_addr))
+ return -EINVAL;
You don't parse bright-max DT property anywhere, AFAICT.
Yes I don't. I have added this bright-max property thinking ahead of
moving the netxbig-gpio-ext stuff into a dedicated driver. For now, it
is possible to compute bright-max from the number of data GPIOs of the
extension bus. But once it will be removed something else will be
needed. That's why I introduced this property.
But now, I am thinking I should have used this property right now. It
will be more convenient when moving the netxbig-gpio-ext code out.
I'll do that for the next round.
Thanks.
+ mode_val =
+ devm_kzalloc(dev,
+ NETXBIG_LED_MODE_NUM * sizeof(*mode_val),
+ GFP_KERNEL);
+ if (!mode_val)
+ return -ENOMEM;
+
+ for (i = 0; i < NETXBIG_LED_MODE_NUM; i++)
+ mode_val[i] = NETXBIG_LED_INVALID_MODE;
+
+ ret = of_property_count_u32_elems(child, "mode-val");
+ if (ret < 0 || ret % 2)
+ return -EINVAL;
+ num_modes = ret / 2;
+ if (num_modes > NETXBIG_LED_MODE_NUM)
+ return -EINVAL;
+
+ for (i = 0; i < num_modes; i++) {
+ int mode;
+ int val;
+
+ of_property_read_u32_index(child,
+ "mode-val", 2 * i, &mode);
+ of_property_read_u32_index(child,
+ "mode-val", 2 * i + 1, &val);
+ if (mode >= NETXBIG_LED_MODE_NUM)
+ return -EINVAL;
+ mode_val[mode] = val;
+ }
+ led->mode_val = mode_val;
+
+ if (!of_property_read_string(child, "label", &string))
+ led->name = string;
+ else
+ led->name = child->name;
+
+ if (!of_property_read_string(child,
+ "linux,default-trigger", &string))
+ led->default_trigger = string;
+
+ led++;
+ }
+
+ pdata->leds = leds;
+ pdata->num_leds = num_leds;
+
+ return 0;
+}
+
+static const struct of_device_id of_netxbig_leds_match[] = {
+ { .compatible = "lacie,netxbig-leds", },
+ {},
+};
+#else
+static int netxbig_leds_get_of_pdata(struct device *dev,
+ struct netxbig_led_platform_data *pdata)
s/static int/static inline int/
Is that not already the case with modern compiler ?
Could you elaborate on this?
--
Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
