Timer0~11 count up from zero to a programmed value and generate an interrupt when the count reaches the programmed value. TIMER0, TIMER1, TIMER2, Timer3, TIMER4 and TIMER5 are in the CPU subsystem, using timer ch0 ~ ch5 respectively. The timer clock is 24MHz OSC. This series are found on RK3368 SoC, verified on rk3368 evb board. Changes in v1: - As Russell, Thomas, Daniel comments, let's replace NO_IRQ by '!irq'. - As the Heiko comments, add the "rockchip,rk3368-timer" for timer. Although the 'rockchip,rk3288-timer' is working for RK3368, need to add the 'rockchip,rk3368-timer' for the rk3368-spec timer in the future. Caesar Wang (3): clocksource: rockchip: Make the driver more readability and compatible arm64: Enable the timer on Rockchip architecture arm64: dts: rockchip: Add the needed timer for RK3368 SoC arch/arm64/Kconfig.platforms | 1 + arch/arm64/boot/dts/rockchip/rk3368.dtsi | 6 ++++++ drivers/clocksource/rockchip_timer.c | 29 +++++++++++++++-------------- 3 files changed, 22 insertions(+), 14 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
