clocksource: sh_cmt: DT binding rework V2 [PATCH v2 01/11] devicetree: bindings: Remove sh7372 CMT binding [PATCH v2 02/11] clocksource: sh_cmt: Use 0x3f mask for SH_CMT_48BIT case [PATCH v2 03/11] devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings [PATCH v2 04/11] clocksource: sh_cmt: Support separate R-Car Gen2 CMT0/1 [PATCH v2 05/11] devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings [PATCH v2 06/11] ARM: shmobile: Update CMT compat string users in DTS [PATCH v2 07/11] devicetree: bindings: Deprecate property, update example [PATCH v2 08/11] ARM: shmobile: Remove CMT renesas,channels-mask from DTS [PATCH v2 09/11] devicetree: bindings: Remove unused 32-bit CMT bindings [PATCH v2 10/11] clocksource: sh_cmt: Remove unused 32-bit CMT bindings [PATCH v2 11/11] devicetree: bindings: Remove deprecated properties This series reworks the CMT DT bindings to try to deal with the following: - R-Car Gen2 CMT0 and CMT1 hardware instances are not identical - The property renesas,channels-mask is not enough to describe the difference - DT should describe the hardware, not the software implementation - Not all documented DT bindings are actually used Without these patches the binding "renesas,cmt-48-gen2" is used for both CMT0 and CMT1 on R-Car Gen2 SoCs. CMT0 and CMT1 are currently seen by the Linux device driver as compatible hardware, and the device-specific property "renesas,channels-mask" is used to point out some of the hardware configuration differences. Since the driver is not feature complete only some differences are described and when diving into the data sheet we can see that: 1) CMT0 is not 48-bit at all, instead it only supports 32-bit counters. 2) Some channels of CMT1 are 48-bit, some 32-bit. 3) A couple of CMT1 channels have even more features. It turns out that none of the above differences are described in our current DT files. And since we use the same compat string for CMT0 and CMT1 the driver itself cannot enable features specific only to CMT1 without first updating the DTS. So this series is ground work for future feature patches. It seems that we have two choices if we want to support CMT1 features: A) Keep existing DT bindings, add more properties for CMT1 B) Rework the compatible strings and keep configuration in the driver Judging by above it seems that DT update is inevitable. In my mind it is rather painful to update the DT so I'd like to minimize the number of updates and let the majority of the changes only happen in the driver. And since we should really describe hardware in DT but driver features tend to be implemented incrementally then B) seems like a good fit to me. I wouldn't mind going with A) but to be honest I must say that the existing compat string "renesas,cmt-48-gen2" is just too confusing with "48" (when CMT0 is 32bit-only) and also "gen2" (used without product line R-Car). Because of that I've gone with B) and reworked the bindings to separate CMT0 from CMT1 and keep channel configuration in the device driver. While at it I've deprecated "renesas,channels-mask" and the old DT compat strings. Per-SoC compat strings have also been reworked, but are not left around documented as deprecated since they were never used by the driver. Comments are very welcome! If all are in favor then it would be good to merge patch 1-5 first and patch 6-8 later once 1-5 are in. Old DTBs are left working but treated as low-feature CMT0. New DTBs including patch 6 will not work on old kernels. V2 patch series fixes patch 1-2 and adds patches 9, 10, 11. Patch 9 and 10 cleans up r8a7740 and sh73a0 bindings. Patch 11 removes deprecated properties as proposed by Laurent. Many thanks to Geert and Laurent for feedback! Signed-off-by: Magnus Damm <damm+renesas@xxxxxxxxxxxxx> Acked-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> (For patch 1-8) Tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> (For patch 1-8) Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> (For patch 1-7) --- Written against renesas-drivers-2015-09-15-v4.3-rc1 Documentation/devicetree/bindings/timer/renesas,cmt.txt | 85 ++++++--------- arch/arm/boot/dts/r8a73a4.dtsi | 5 arch/arm/boot/dts/r8a7740.dtsi | 3 arch/arm/boot/dts/r8a7790.dtsi | 10 - arch/arm/boot/dts/r8a7791.dtsi | 10 - arch/arm/boot/dts/r8a7793.dtsi | 10 - arch/arm/boot/dts/r8a7794.dtsi | 10 - arch/arm/boot/dts/sh73a0.dtsi | 3 drivers/clocksource/sh_cmt.c | 54 ++++++--- 9 files changed, 85 insertions(+), 105 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
