On Wed, Sep 16, 2015 at 03:06:04PM +0900, Krzysztof Kozlowski wrote: > On 16.09.2015 02:58, Andreas Dannenberg wrote: > > A new optional device property called "ti,in-dpm-voltage" is introduced > > to allow configuring the input voltage threshold for the devices' > > dynamic power path management (DPM) feature. In short, it can be used to > > prevent the input voltage from dropping below a certain value as current > > is drawn to charge the battery or supply the system. > > > > Signed-off-by: Andreas Dannenberg <dannenberg@xxxxxx> > > --- > > drivers/power/bq24257_charger.c | 44 +++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 44 insertions(+) > > > > diff --git a/drivers/power/bq24257_charger.c b/drivers/power/bq24257_charger.c > > index 47af858..84a8945 100644 > > --- a/drivers/power/bq24257_charger.c > > +++ b/drivers/power/bq24257_charger.c > > @@ -76,6 +76,7 @@ struct bq24257_init_data { > > u8 iterm; /* termination current */ > > u8 in_ilimit; /* input current limit */ > > u8 vovp; /* over voltage protection voltage */ > > + u8 vindpm; /* VDMP input threshold voltage */ > > }; > > > > struct bq24257_state { > > @@ -206,6 +207,13 @@ static const u32 bq24257_vovp_map[] = { > > > > #define BQ24257_VOVP_MAP_SIZE ARRAY_SIZE(bq24257_vovp_map) > > > > +static const u32 bq24257_vindpm_map[] = { > > + 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000, > > + 4760000 > > +}; > > + > > +#define BQ24257_VINDPM_MAP_SIZE ARRAY_SIZE(bq24257_vindpm_map) > > + > > static int bq24257_field_read(struct bq24257_device *bq, > > enum bq24257_fields field_id) > > { > > @@ -432,6 +440,17 @@ enum bq24257_vovp { > > VOVP_10500 > > }; > > > > +enum bq24257_vindpm { > > + VINDPM_4200, > > + VINDPM_4280, > > + VINDPM_4360, > > + VINDPM_4440, > > + VINDPM_4520, > > + VINDPM_4600, > > + VINDPM_4680, > > + VINDPM_4760 > > +}; > > Same as patch 6/10... but now see the use case - to choose default value > not by index of array but from this enum. > > I see the idea behind so skip that comment from 6/10. OK. > > + > > enum bq24257_port_type { > > PORT_TYPE_DCP, /* Dedicated Charging Port */ > > PORT_TYPE_CDP, /* Charging Downstream Port */ > > @@ -615,6 +634,7 @@ static int bq24257_hw_init(struct bq24257_device *bq) > > {F_VBAT, bq->init_data.vbat}, > > {F_ITERM, bq->init_data.iterm}, > > {F_VOVP, bq->init_data.vovp}, > > + {F_VINDPM, bq->init_data.vindpm}, > > }; > > > > /* > > @@ -648,6 +668,7 @@ static int bq24257_hw_init(struct bq24257_device *bq) > > /* program fixed input current limit */ > > ret = bq24257_field_write(bq, F_IILIMIT, > > bq->init_data.in_ilimit); > > + > > Not part of this patch. It confuses the reviewer of patch. If you need > cleanups, make them separate. Artifact. This should not be there. > > if (ret < 0) > > return ret; > > } else if (!state.power_good) > > @@ -695,10 +716,23 @@ static ssize_t bq24257_show_ovp_voltage(struct device *dev, > > bq24257_vovp_map[bq->init_data.vovp]); > > } > > > > +static ssize_t bq24257_show_in_dpm_voltage(struct device *dev, > > + struct device_attribute *attr, > > + char *buf) > > +{ > > + struct power_supply *psy = dev_get_drvdata(dev); > > + struct bq24257_device *bq = power_supply_get_drvdata(psy); > > + > > + return scnprintf(buf, PAGE_SIZE, "%d\n", > > + bq24257_vindpm_map[bq->init_data.vindpm]); > > Same as patch 6/10. OK. Regards, -- Andreas Dannenberg Texas Instruments Inc > > Best regards, > Krzysztof > > > +} > > + > > static DEVICE_ATTR(ovp_voltage, S_IRUGO, bq24257_show_ovp_voltage, NULL); > > +static DEVICE_ATTR(in_dpm_voltage, S_IRUGO, bq24257_show_in_dpm_voltage, NULL); > > > > static struct attribute *bq24257_charger_attr[] = { > > &dev_attr_ovp_voltage.attr, > > + &dev_attr_in_dpm_voltage.attr, > > NULL, > > }; > > > > @@ -801,6 +835,16 @@ static int bq24257_fw_probe(struct bq24257_device *bq) > > bq24257_vovp_map, > > BQ24257_VOVP_MAP_SIZE); > > > > + ret = device_property_read_u32(bq->dev, "ti,in-dpm-voltage", > > + &property); > > + if (ret < 0) > > + bq->init_data.vindpm = VINDPM_4360; > > + else > > + bq->init_data.vindpm = > > + bq24257_find_idx(property, > > + bq24257_vindpm_map, > > + BQ24257_VINDPM_MAP_SIZE); > > + > > return 0; > > } > > > > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html