On 09/15/2015 08:49 PM, Peter Chen wrote: > Some SoCs needs three clock to let controller work, but others only > need one, add one property to differentiate this. A given licensed IP block is going to have the same number of clock inputs from SOC to SOC. So different numbers of clocks is a bit suspect. I guess there can be variations in bus clocks or other outside logic. > > Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > index f15a317..4900092 100644 > --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > @@ -54,6 +54,9 @@ i.mx specific properties > argument that indicate usb controller index > - disable-over-current: disable over current detect > - external-vbus-divider: enables off-chip resistor divider for Vbus > +- need-three-clocks: the SoC before imx6 series (except for imx23/imx28) > + needs three clcoks for controller, others only need one. Without this > + property, the driver will consider this controller only need one clock. That's pretty ugly and unnecessary. Either use the compatible string to determine if you have 3 clocks or just always try to retrieve the 3 clocks in the driver and fall back to 1. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
