The DC1SW and DC5LDO regulators in the AXP221 are internally chained to DCDC1 and DCDC5, hence the names. The original bindings used the parent regulator names for the supply regulator property. This causes some confusion when we actually use it in the dts: axp221 { /* self supplying? */ dcdc1-supply = <&dcdc1>; dcdc5-supply = <&dcdc5>; dcdc1: dcdc1 { ... }; dcdc5: dcdc5 { ... }; }; Change them to the downstream regulator names, or "dc1sw" and "dc5ldo" respectively. Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx> --- drivers/regulator/axp20x-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 01bf3476a791..27ebee8e224c 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -196,10 +196,10 @@ static const struct regulator_desc axp22x_regulators[] = { AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50, AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(4)), /* secondary switchable output of DCDC1 */ - AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", "dcdc1", 1600, 3400, 100, + AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", "dc1sw", 1600, 3400, 100, AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)), /* LDO regulator internally chained to DCDC5 */ - AXP_DESC(AXP22X, DC5LDO, "dc5ldo", "dcdc5", 700, 1400, 100, + AXP_DESC(AXP22X, DC5LDO, "dc5ldo", "dc5ldo", 700, 1400, 100, AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)), AXP_DESC(AXP22X, ALDO1, "aldo1", "aldoin", 700, 3300, 100, AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)), -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html