From: Mugunthan V N <mugunthanvnm@xxxxxx> Date: Mon, 7 Sep 2015 15:16:44 +0530 > In DRA72x EVM, by default slave 1 is connected to the onboard > phy, but slave 2 pins are also muxed with video input module > which is controlled by pcf857x gpio and currently to select slave > 0 to connect to phy gpio hogging is used, but with > omap2plus_defconfig the pcf857x gpio is built as module. So when > using NFS on DRA72x EVM, board doesn't boot as gpio hogging do > not set proper gpio state to connect slave 0 to phy as it is > built as module and you do not see any errors for not setting > gpio and just mentions dhcp reply not got. > > To solve this issue, introducing "mode-gpios" in DT when gpio > based muxing is required. This will throw a warning when gpio > get fails and returns probe defer. When gpio-pcf857x module is > installed, cpsw probes again and ethernet becomes functional. > Verified this on DRA72x with pcf as module and ramdisk. > > Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx> Applied, thanks. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html