[PATCH v2 0/3] ARM: brcmstb: Bus Interface Unit support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi all,

This patch series adds support for early boot time Bus Interface Unit control
register setup which is required to occur before SMP is brought-up, but needs
to remap registers, so init_irq() is chosen for that.

This builds on top of the 'soc/next' branch at github.com/Broadcom/stblinux

Major changes in v2:

- updated Device Tree documentation based on Rob's feedback
- added a better pr_fmt format for pr_* calls in biuctrl.c

Florian Fainelli (3):
  Documentation: bindings: brcmstb: Document write-pairing
  soc: brcmstb: Add Bus Interface Unit control setup
  ARM: brcmstb: Setup BIU control registers during boot

 .../devicetree/bindings/arm/bcm/brcm,brcmstb.txt   |  20 ++++
 arch/arm/mach-bcm/brcmstb.c                        |   9 ++
 drivers/soc/brcmstb/Makefile                       |   2 +-
 drivers/soc/brcmstb/biuctrl.c                      | 119 +++++++++++++++++++++
 include/linux/soc/brcmstb/brcmstb.h                |  10 ++
 5 files changed, 159 insertions(+), 1 deletion(-)
 create mode 100644 drivers/soc/brcmstb/biuctrl.c
 create mode 100644 include/linux/soc/brcmstb/brcmstb.h

-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux