Hi, Shawn. Sorry for late review. On 08/24/2015 10:25 AM, Shawn Lin wrote: > DesignWare MMC Controller can supports two types of DMA > mode: external dma and internal dma. We get a RK312x platform > integrated dw_mmc and ARM pl330 dma controller. This patch add > edmac ops to support these platforms. I've tested it on RK31xx > platform with edmac mode and RK3288 platform with idmac mode. > > Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> > > --- > > Changes in v7: > - rebased on Ulf's next > - combine condition state > - elaborate more about DMA_INTERFACE > - define some macro for DMA_INERFACE value > - spilt HCON ops' changes into another patch > > Changes in v6: > - add trans_mode condition for IDMAC initialization > suggested by Heiko > - re-test my patch on rk3188 platform and update commit msg > - update performance of pio vs edmac in cover letter > > Changes in v5: > - add the title of cover letter > - fix typo of comment > - add macro for reading HCON register > - add "Acked-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>" for exynos_defconfig patch > - add "Acked-by: Vineet Gupta <vgupta@xxxxxxxxxxxx>" for axs10x_defconfig patch > - add "Acked-by: Govindraj Raja <govindraj.raja@xxxxxxxxxx>" and > "Acked-by: Ralf Baechle <ralf@xxxxxxxxxxxxxx>" for pistachio_defconfig patch > - add "Acked-by: Joachim Eastwood <manabian@xxxxxxxxx>" for lpc18xx_defconfig patch > - add "Acked-by: Wei Xu <xuwei5@xxxxxxxxxxxxx>" for hisi_defconfig patch > - rebase on "https://github.com/jh80chung/dw-mmc.git tags/dw-mmc-for-ulf-v4.2" for merging easily > > Changes in v4: > - remove "host->trans_mode" and use "host->use_dma" to indicate > transfer mode. > - remove all bt-bindings' changes since we don't need new properities. > - check transfer mode at runtime by reading HCON reg > - spilt defconfig changes for each sub-architecture > - fix the title of cover letter > - reuse some code for reducing code size > > Changes in v3: > - choose transfer mode at runtime > - remove all CONFIG_MMC_DW_IDMAC config option > - add supports-idmac property for some platforms > > Changes in v2: > - Fix typo of dev_info msg > - remove unused dmach from declaration of dw_mci_dma_slave > > drivers/mmc/host/Kconfig | 11 +- > drivers/mmc/host/dw_mmc-pltfm.c | 2 + > drivers/mmc/host/dw_mmc.c | 273 ++++++++++++++++++++++++++++++++-------- > drivers/mmc/host/dw_mmc.h | 6 + > include/linux/mmc/dw_mmc.h | 23 +++- > 5 files changed, 253 insertions(+), 62 deletions(-) > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 6a0f9c7..539b1a6 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -607,15 +607,7 @@ config MMC_DW > help > This selects support for the Synopsys DesignWare Mobile Storage IP > block, this provides host support for SD and MMC interfaces, in both > - PIO and external DMA modes. > - > -config MMC_DW_IDMAC > - bool "Internal DMAC interface" > - depends on MMC_DW > - help > - This selects support for the internal DMAC block within the Synopsys > - Designware Mobile Storage IP block. This disables the external DMA > - interface. > + PIO, internal DMA mode and external DMA mode. In future, i will add the quirk for broken IDMAC. This patch is absolutely depended on HCON register, but some IP can be broken it. how about? > > config MMC_DW_PLTFM > tristate "Synopsys Designware MCI Support as platform device" > @@ -644,7 +636,6 @@ config MMC_DW_K3 > tristate "K3 specific extensions for Synopsys DW Memory Card Interface" > depends on MMC_DW > select MMC_DW_PLTFM > - select MMC_DW_IDMAC > help > This selects support for Hisilicon K3 SoC specific extensions to the > Synopsys DesignWare Memory Card Interface driver. Select this option > diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c > index ec6dbcd..7e1d13b 100644 > --- a/drivers/mmc/host/dw_mmc-pltfm.c > +++ b/drivers/mmc/host/dw_mmc-pltfm.c > @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev, > host->pdata = pdev->dev.platform_data; > > regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + /* Get registers' physical base address */ > + host->phy_regs = (void *)(regs->start); > host->regs = devm_ioremap_resource(&pdev->dev, regs); > if (IS_ERR(host->regs)) > return PTR_ERR(host->regs); > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index fcbf552..9c91983 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -56,7 +56,6 @@ > #define DW_MCI_FREQ_MAX 200000000 /* unit: HZ */ > #define DW_MCI_FREQ_MIN 400000 /* unit: HZ */ > > -#ifdef CONFIG_MMC_DW_IDMAC > #define IDMAC_INT_CLR (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \ > SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \ > SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \ > @@ -102,7 +101,6 @@ struct idmac_desc { > > /* Each descriptor can transfer up to 4KB of data in chained mode */ > #define DW_MCI_DESC_DATA_LENGTH 0x1000 > -#endif /* CONFIG_MMC_DW_IDMAC */ > > static bool dw_mci_reset(struct dw_mci *host); > static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset); > @@ -407,7 +405,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data) > return DMA_FROM_DEVICE; > } > > -#ifdef CONFIG_MMC_DW_IDMAC > static void dw_mci_dma_cleanup(struct dw_mci *host) > { > struct mmc_data *data = host->data; > @@ -445,12 +442,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host) > mci_writel(host, BMOD, temp); > } > > -static void dw_mci_idmac_complete_dma(struct dw_mci *host) > +static void dw_mci_dmac_complete_dma(void *arg) > { > + struct dw_mci *host = arg; > struct mmc_data *data = host->data; > > dev_vdbg(host->dev, "DMA complete\n"); > > + if ((host->use_dma == TRANS_MODE_EDMAC) && > + data && (data->flags & MMC_DATA_READ)) > + /* Invalidate cache after read */ > + dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc), > + data->sg, > + data->sg_len, > + DMA_FROM_DEVICE); > + > host->dma_ops->cleanup(host); > > /* > @@ -564,7 +570,7 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data, > wmb(); /* drain writebuffer */ > } > > -static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) > +static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) > { > u32 temp; > > @@ -589,6 +595,8 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) > > /* Start it running */ > mci_writel(host, PLDMND, 1); > + > + return 0; > } > > static int dw_mci_idmac_init(struct dw_mci *host) > @@ -669,10 +677,112 @@ static const struct dw_mci_dma_ops dw_mci_idmac_ops = { > .init = dw_mci_idmac_init, > .start = dw_mci_idmac_start_dma, > .stop = dw_mci_idmac_stop_dma, > - .complete = dw_mci_idmac_complete_dma, > + .complete = dw_mci_dmac_complete_dma, > + .cleanup = dw_mci_dma_cleanup, > +}; > + > +static void dw_mci_edmac_stop_dma(struct dw_mci *host) > +{ > + dmaengine_terminate_all(host->dms->ch); Does it need not to check "return value"? > +} > + > +static int dw_mci_edmac_start_dma(struct dw_mci *host, > + unsigned int sg_len) > +{ > + struct dma_slave_config cfg; > + struct dma_async_tx_descriptor *desc = NULL; > + struct scatterlist *sgl = host->data->sg; > + const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256}; > + u32 sg_elems = host->data->sg_len; > + u32 fifoth_val; > + u32 fifo_offset = host->fifo_reg - host->regs; > + int ret = 0; > + > + /* Set external dma config: burst size, burst width */ > + cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset); > + cfg.src_addr = cfg.dst_addr; > + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > + > + /* Match burst msize with external dma config */ > + fifoth_val = mci_readl(host, FIFOTH); > + cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7]; > + cfg.src_maxburst = cfg.dst_maxburst; The above configuration needs to set it at every time? > + > + if (host->data->flags & MMC_DATA_WRITE) > + cfg.direction = DMA_MEM_TO_DEV; > + else /* MMC_DATA_READ */ Can be removed the comment. > + cfg.direction = DMA_DEV_TO_MEM; > + > + ret = dmaengine_slave_config(host->dms->ch, &cfg); > + if (ret) { > + dev_err(host->dev, "Failed to config edmac.\n"); > + return -EBUSY; > + } > + > + desc = dmaengine_prep_slave_sg(host->dms->ch, sgl, > + sg_len, cfg.direction, > + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); > + if (!desc) { > + dev_err(host->dev, "Can't prepare slave sg.\n"); > + return -EBUSY; > + } > + > + /* Set dw_mci_dmac_complete_dma as callback */ > + desc->callback = dw_mci_dmac_complete_dma; > + desc->callback_param = (void *)host; > + dmaengine_submit(desc); > + > + /* Flush cache before write */ > + if (host->data->flags & MMC_DATA_WRITE) > + dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl, > + sg_elems, DMA_TO_DEVICE); > + > + dma_async_issue_pending(host->dms->ch); > + > + return 0; > +} > + > +static int dw_mci_edmac_init(struct dw_mci *host) > +{ > + /* Request external dma channel */ > + host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL); > + if (!host->dms) > + return -ENOMEM; > + > + host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx"); > + if (!host->dms->ch) { > + dev_err(host->dev, > + "Failed to get external DMA channel %d\n", > + host->dms->ch->chan_id); > + kfree(host->dms); > + host->dms = NULL; > + return -ENXIO; > + } > + > + return 0; > +} > + > +static void dw_mci_edmac_exit(struct dw_mci *host) > +{ > + if (host->dms) { > + if (host->dms->ch) { > + dma_release_channel(host->dms->ch); > + host->dms->ch = NULL; > + } > + kfree(host->dms); > + host->dms = NULL; > + } > +} > + > +static const struct dw_mci_dma_ops dw_mci_edmac_ops = { > + .init = dw_mci_edmac_init, > + .exit = dw_mci_edmac_exit, > + .start = dw_mci_edmac_start_dma, > + .stop = dw_mci_edmac_stop_dma, > + .complete = dw_mci_dmac_complete_dma, > .cleanup = dw_mci_dma_cleanup, > }; > -#endif /* CONFIG_MMC_DW_IDMAC */ > > static int dw_mci_pre_dma_transfer(struct dw_mci *host, > struct mmc_data *data, > @@ -752,7 +862,6 @@ static void dw_mci_post_req(struct mmc_host *mmc, > > static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data) > { > -#ifdef CONFIG_MMC_DW_IDMAC > unsigned int blksz = data->blksz; > const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256}; > u32 fifo_width = 1 << host->data_shift; > @@ -760,6 +869,10 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data) > u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers; > int idx = ARRAY_SIZE(mszs) - 1; > > + /* pio should ship this scenario */ > + if (!host->use_dma) > + return; > + > tx_wmark = (host->fifo_depth) / 2; > tx_wmark_invers = host->fifo_depth - tx_wmark; > > @@ -788,7 +901,6 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data) > done: > fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark); > mci_writel(host, FIFOTH, fifoth_val); > -#endif > } > > static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data) > @@ -850,10 +962,12 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) > > host->using_dma = 1; > > - dev_vdbg(host->dev, > - "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n", > - (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma, > - sg_len); > + if (host->use_dma == TRANS_MODE_IDMAC) > + dev_vdbg(host->dev, > + "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n", > + (unsigned long)host->sg_cpu, > + (unsigned long)host->sg_dma, > + sg_len); > > /* > * Decide the MSIZE and RX/TX Watermark. > @@ -875,7 +989,11 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) > mci_writel(host, INTMASK, temp); > spin_unlock_irqrestore(&host->irq_lock, irqflags); > > - host->dma_ops->start(host, sg_len); > + if (host->dma_ops->start(host, sg_len)) { > + /* We can't do DMA */ > + dev_err(host->dev, "%s: failed to start DMA.\n", __func__); > + return -ENODEV; > + } > > return 0; > } > @@ -2343,15 +2461,17 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) > > } > > -#ifdef CONFIG_MMC_DW_IDMAC > - /* Handle DMA interrupts */ > + if (host->use_dma != TRANS_MODE_IDMAC) > + return IRQ_HANDLED; > + > + /* Handle IDMA interrupts */ > if (host->dma_64bit_address == 1) { > pending = mci_readl(host, IDSTS64); > if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) { > mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI | > SDMMC_IDMAC_INT_RI); > mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI); > - host->dma_ops->complete(host); > + host->dma_ops->complete((void *)host); > } > } else { > pending = mci_readl(host, IDSTS); > @@ -2359,10 +2479,9 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) > mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | > SDMMC_IDMAC_INT_RI); > mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI); > - host->dma_ops->complete(host); > + host->dma_ops->complete((void *)host); > } > } > -#endif > > return IRQ_HANDLED; > } > @@ -2471,13 +2590,21 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) > goto err_host_allocated; > > /* Useful defaults if platform data is unset. */ > - if (host->use_dma) { > + if (host->use_dma == TRANS_MODE_IDMAC) { > mmc->max_segs = host->ring_size; > mmc->max_blk_size = 65536; > mmc->max_seg_size = 0x1000; > mmc->max_req_size = mmc->max_seg_size * host->ring_size; > mmc->max_blk_count = mmc->max_req_size / 512; > + } else if (host->use_dma == TRANS_MODE_EDMAC) { > + mmc->max_segs = 64; > + mmc->max_blk_size = 65536; > + mmc->max_blk_count = 65535; > + mmc->max_req_size = > + mmc->max_blk_size * mmc->max_blk_count; > + mmc->max_seg_size = mmc->max_req_size; WARNING: suspect code indent for conditional statements (8, 24) #349: FILE: drivers/mmc/host/dw_mmc.c:2599: + } else if (host->use_dma == TRANS_MODE_EDMAC) { + mmc->max_segs = 64; > } else { > + /* TRANS_MODE_PIO */ > mmc->max_segs = 64; > mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */ > mmc->max_blk_count = 512; > @@ -2517,35 +2644,79 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) > static void dw_mci_init_dma(struct dw_mci *host) > { > int addr_config; > - /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */ > - addr_config = (mci_readl(host, HCON) >> 27) & 0x01; > - > - if (addr_config == 1) { > - /* host supports IDMAC in 64-bit address mode */ > - host->dma_64bit_address = 1; > - dev_info(host->dev, "IDMAC supports 64-bit address mode.\n"); > - if (!dma_set_mask(host->dev, DMA_BIT_MASK(64))) > - dma_set_coherent_mask(host->dev, DMA_BIT_MASK(64)); > - } else { > - /* host supports IDMAC in 32-bit address mode */ > - host->dma_64bit_address = 0; > - dev_info(host->dev, "IDMAC supports 32-bit address mode.\n"); > - } > + int trans_mode; > + struct device *dev = host->dev; > + struct device_node *np = dev->of_node; > > - /* Alloc memory for sg translation */ > - host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE, > - &host->sg_dma, GFP_KERNEL); > - if (!host->sg_cpu) { > - dev_err(host->dev, "%s: could not alloc DMA memory\n", > - __func__); > + /* > + * Check tansfer mode from HCON[17:16] > + * Clear the ambiguous description of dw_mmc databook: > + * 2b'00: No DMA Interface -> Actually means using Internal DMA block > + * 2b'01: DesignWare DMA Interface -> Synopsys DW-DMA block > + * 2b'10: Generic DMA Interface -> non-Synopsys generic DMA block > + * 2b'11: Non DW DMA Interface -> pio only > + * Compared to DesignWare DMA Interface, Generic DMA Interface has a > + * simpler request/acknowledge handshake mechanism and both of them > + * are regarded as external dma master for dw_mmc. > + * Note: host->use_dma can't take HCON[17:16] value directly for the > + * the reason mentioned above. > + */ trans_mode can't take HCON value, but trans_mode reassigned to "TRANS_MODE_IDMAC" or "TRANS_MODE_EDMAC".. It's reassigned to host->use_dma...why can't use the host->use_dma? Your code.. 1. trans_mode <- HCON value 2. Check trans_mode which interface use. then trans_mode <- TRANS_MODE_IDMAC/EDMAC/PIO 3. host->use_dma <- trans_mode isn't? It can be replaced to "host->use_dma" instead of "trans_mode". > + trans_mode = SDMMC_GET_TRANS_MODE(mci_readl(host, HCON)); > + if (trans_mode == DMA_INTERFACE_IDMA) { > + trans_mode = TRANS_MODE_IDMAC; > + } else if (trans_mode == DMA_INTERFACE_DWDMA || > + trans_mode == DMA_INTERFACE_GDMA) { > + trans_mode = TRANS_MODE_EDMAC; > + } else { > + trans_mode = TRANS_MODE_PIO; > goto no_dma; > } > > /* Determine which DMA interface to use */ > -#ifdef CONFIG_MMC_DW_IDMAC > - host->dma_ops = &dw_mci_idmac_ops; > - dev_info(host->dev, "Using internal DMA controller.\n"); > -#endif > + if (trans_mode == TRANS_MODE_IDMAC) { > + /* > + * Check ADDR_CONFIG bit in HCON to find > + * IDMAC address bus width > + */ > + addr_config = (mci_readl(host, HCON) >> 27) & 0x01; > + > + if (addr_config == 1) { > + /* host supports IDMAC in 64-bit address mode */ > + host->dma_64bit_address = 1; > + dev_info(host->dev, > + "IDMAC supports 64-bit address mode.\n"); > + if (!dma_set_mask(host->dev, DMA_BIT_MASK(64))) > + dma_set_coherent_mask(host->dev, > + DMA_BIT_MASK(64)); > + } else { > + /* host supports IDMAC in 32-bit address mode */ > + host->dma_64bit_address = 0; > + dev_info(host->dev, > + "IDMAC supports 32-bit address mode.\n"); > + } > + > + /* Alloc memory for sg translation */ > + host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE, > + &host->sg_dma, GFP_KERNEL); > + if (!host->sg_cpu) { > + dev_err(host->dev, > + "%s: could not alloc DMA memory\n", > + __func__); > + goto no_dma; > + } > + > + host->dma_ops = &dw_mci_idmac_ops; > + dev_info(host->dev, "Using internal DMA controller.\n"); > + } else { > + /* TRANS_MODE_EDMAC: check dma bindings again */ > + if ((of_property_count_strings(np, "dma-names") < 0) || > + (!of_find_property(np, "dmas", NULL))) { > + trans_mode = TRANS_MODE_PIO; > + goto no_dma; > + } > + host->dma_ops = &dw_mci_edmac_ops; > + dev_info(host->dev, "Using external DMA controller.\n"); > + } > > if (!host->dma_ops) > goto no_dma; This checking seems unnecessary, after applied your code. Best Regards, Jaehoon Chung > @@ -2562,12 +2733,12 @@ static void dw_mci_init_dma(struct dw_mci *host) > goto no_dma; > } > > - host->use_dma = 1; > + host->use_dma = trans_mode; > return; > > no_dma: > dev_info(host->dev, "Using PIO mode.\n"); > - host->use_dma = 0; > + host->use_dma = trans_mode; > } > > static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset) > @@ -2650,10 +2821,9 @@ static bool dw_mci_reset(struct dw_mci *host) > } > } > > -#if IS_ENABLED(CONFIG_MMC_DW_IDMAC) > - /* It is also recommended that we reset and reprogram idmac */ > - dw_mci_idmac_reset(host); > -#endif > + if (host->use_dma == TRANS_MODE_IDMAC) > + /* It is also recommended that we reset and reprogram idmac */ > + dw_mci_idmac_reset(host); > > ret = true; > > @@ -3067,6 +3237,9 @@ EXPORT_SYMBOL(dw_mci_remove); > */ > int dw_mci_suspend(struct dw_mci *host) > { > + if (host->use_dma && host->dma_ops->exit) > + host->dma_ops->exit(host); > + > return 0; > } > EXPORT_SYMBOL(dw_mci_suspend); > diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h > index 8ce4674..811d467 100644 > --- a/drivers/mmc/host/dw_mmc.h > +++ b/drivers/mmc/host/dw_mmc.h > @@ -148,6 +148,12 @@ > #define SDMMC_SET_FIFOTH(m, r, t) (((m) & 0x7) << 28 | \ > ((r) & 0xFFF) << 16 | \ > ((t) & 0xFFF)) > +/* HCON register defines */ > +#define DMA_INTERFACE_IDMA (0x0) > +#define DMA_INTERFACE_DWDMA (0x1) > +#define DMA_INTERFACE_GDMA (0x2) > +#define DMA_INTERFACE_NODMA (0x3) > +#define SDMMC_GET_TRANS_MODE(x) (((x)>>16) & 0x3) > /* Internal DMAC interrupt defines */ > #define SDMMC_IDMAC_INT_AI BIT(9) > #define SDMMC_IDMAC_INT_NI BIT(8) > diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h > index 134c574..f67b2ec 100644 > --- a/include/linux/mmc/dw_mmc.h > +++ b/include/linux/mmc/dw_mmc.h > @@ -16,6 +16,7 @@ > > #include <linux/scatterlist.h> > #include <linux/mmc/core.h> > +#include <linux/dmaengine.h> > > #define MAX_MCI_SLOTS 2 > > @@ -40,6 +41,17 @@ enum { > > struct mmc_data; > > +enum { > + TRANS_MODE_PIO = 0, > + TRANS_MODE_IDMAC, > + TRANS_MODE_EDMAC > +}; > + > +struct dw_mci_dma_slave { > + struct dma_chan *ch; > + enum dma_transfer_direction direction; > +}; > + > /** > * struct dw_mci - MMC controller state shared between all slots > * @lock: Spinlock protecting the queue and associated data. > @@ -154,7 +166,14 @@ struct dw_mci { > dma_addr_t sg_dma; > void *sg_cpu; > const struct dw_mci_dma_ops *dma_ops; > + /* For idmac */ > unsigned int ring_size; > + > + /* For edmac */ > + struct dw_mci_dma_slave *dms; > + /* Registers's physical base address */ > + void *phy_regs; > + > u32 cmd_status; > u32 data_status; > u32 stop_cmdr; > @@ -208,8 +227,8 @@ struct dw_mci { > struct dw_mci_dma_ops { > /* DMA Ops */ > int (*init)(struct dw_mci *host); > - void (*start)(struct dw_mci *host, unsigned int sg_len); > - void (*complete)(struct dw_mci *host); > + int (*start)(struct dw_mci *host, unsigned int sg_len); > + void (*complete)(void *host); > void (*stop)(struct dw_mci *host); > void (*cleanup)(struct dw_mci *host); > void (*exit)(struct dw_mci *host); > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
