Hi all, This patch series adds support for early boot time Bus Interface Unit control register setup which is required to occur before SMP is brought-up, but needs to remap registers, so init_irq() is chosen for that. This builds on top of the 'soc/next' branch at github.com/Broadcom/stblinux Thanks! Florian Fainelli (3): Documentation: bindings: brcmstb: Document write-pairing soc: brcmstb: Add Bus Interface Unit control setup ARM: brcmstb: Setup BIU control registers during boot .../devicetree/bindings/arm/bcm/brcm,brcmstb.txt | 15 +++ arch/arm/mach-bcm/brcmstb.c | 9 ++ drivers/soc/brcmstb/Makefile | 2 +- drivers/soc/brcmstb/biuctrl.c | 117 +++++++++++++++++++++ include/linux/soc/brcmstb/brcmstb.h | 10 ++ 5 files changed, 152 insertions(+), 1 deletion(-) create mode 100644 drivers/soc/brcmstb/biuctrl.c create mode 100644 include/linux/soc/brcmstb/brcmstb.h -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html