The SCP firmware on Juno provides access to SoC sensors via the SCPI. Add the sensor nodes to the device tree to enable this support. Signed-off-by: Punit Agrawal <punit.agrawal@xxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Mark Rutland <mark.rutland@xxxxxxx> Cc: Liviu Dudau <liviu.dudau@xxxxxxx> Cc: Sudeep Holla <sudeep.holla@xxxxxxx> --- arch/arm64/boot/dts/arm/juno-base.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index c624208..dd5158e 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -96,6 +96,11 @@ clock-output-names = "pxlclk0", "pxlclk1"; }; }; + + scpi_sensors0: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; }; /include/ "juno-clocks.dtsi" -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html