Hi Enric,
Partial review for now, thanks for you work.
Best,
On Thu, Sep 10, 2015 at 06:35:52PM +0200, Enric Balletbo i Serra wrote:
> At the moment it only supports ANX7814.
>
> The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
> designed for portable devices.
>
> This driver adds initial support and supports HDMI to DP pass-through mode.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> ---
Please include a revision log here, stating what you changed between each
version.
> drivers/gpu/drm/bridge/Kconfig | 2 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/anx78xx/Kconfig | 7 +
> drivers/gpu/drm/bridge/anx78xx/Makefile | 4 +
> drivers/gpu/drm/bridge/anx78xx/anx78xx.h | 44 +
> drivers/gpu/drm/bridge/anx78xx/anx78xx_main.c | 241 ++
> drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.c | 3198 ++++++++++++++++++++++
> drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.h | 215 ++
> drivers/gpu/drm/bridge/anx78xx/slimport_tx_reg.h | 786 ++++++
> 9 files changed, 4498 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/anx78xx/Kconfig
> create mode 100644 drivers/gpu/drm/bridge/anx78xx/Makefile
> create mode 100644 drivers/gpu/drm/bridge/anx78xx/anx78xx.h
> create mode 100644 drivers/gpu/drm/bridge/anx78xx/anx78xx_main.c
> create mode 100644 drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.c
> create mode 100644 drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.h
> create mode 100644 drivers/gpu/drm/bridge/anx78xx/slimport_tx_reg.h
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 2de52a5..aa6fe12 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -29,4 +29,6 @@ config DRM_PARADE_PS8622
> ---help---
> Parade eDP-LVDS bridge chip driver.
>
> +source "drivers/gpu/drm/bridge/anx78xx/Kconfig"
> +
> endmenu
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index e2eef1c..e5bd38b 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -3,3 +3,4 @@ ccflags-y := -Iinclude/drm
> obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o
> obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> +obj-$(CONFIG_DRM_ANX78XX) += anx78xx/
> diff --git a/drivers/gpu/drm/bridge/anx78xx/Kconfig b/drivers/gpu/drm/bridge/anx78xx/Kconfig
> new file mode 100644
> index 0000000..08f9c08
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/anx78xx/Kconfig
> @@ -0,0 +1,7 @@
> +config DRM_ANX78XX
> + tristate "Analogix ANX78XX bridge"
> + help
> + ANX78XX is a HD video transmitter chip over micro-USB
> + connector for smartphone device.
> +
> +
> diff --git a/drivers/gpu/drm/bridge/anx78xx/Makefile b/drivers/gpu/drm/bridge/anx78xx/Makefile
> new file mode 100644
> index 0000000..a843733
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/anx78xx/Makefile
> @@ -0,0 +1,4 @@
> +obj-${CONFIG_DRM_ANX78XX} := anx78xx.o
> +
> +anx78xx-y += anx78xx_main.o
> +anx78xx-y += slimport_tx_drv.o
> diff --git a/drivers/gpu/drm/bridge/anx78xx/anx78xx.h b/drivers/gpu/drm/bridge/anx78xx/anx78xx.h
> new file mode 100644
> index 0000000..4f6dd1d
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/anx78xx/anx78xx.h
> @@ -0,0 +1,44 @@
> +/*
> + * Copyright(c) 2015, Analogix Semiconductor. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __ANX78xx_H
> +#define __ANX78xx_H
> +
> +#include <linux/i2c.h>
> +#include <linux/mutex.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>
> +#include <linux/gpio/consumer.h>
> +
> +#define AUX_ERR 1
> +#define AUX_OK 0
> +
> +struct anx78xx_platform_data {
> + struct gpio_desc *gpiod_pd;
> + struct gpio_desc *gpiod_reset;
> + spinlock_t lock;
> +};
> +
> +struct anx78xx {
> + struct i2c_client *client;
> + struct anx78xx_platform_data *pdata;
> + struct delayed_work work;
> + struct workqueue_struct *workqueue;
> + struct mutex lock;
> +};
> +
> +void anx78xx_poweron(struct anx78xx *data);
> +void anx78xx_poweroff(struct anx78xx *data);
> +
> +#endif
> diff --git a/drivers/gpu/drm/bridge/anx78xx/anx78xx_main.c b/drivers/gpu/drm/bridge/anx78xx/anx78xx_main.c
> new file mode 100644
> index 0000000..b92d2bc
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/anx78xx/anx78xx_main.c
> @@ -0,0 +1,241 @@
> +/*
> + * Copyright(c) 2015, Analogix Semiconductor. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/err.h>
> +#include <linux/async.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_platform.h>
> +#include <linux/delay.h>
> +
> +#include "anx78xx.h"
> +#include "slimport_tx_drv.h"
> +
> +void anx78xx_poweron(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + struct anx78xx_platform_data *pdata = anx78xx->pdata;
> +
> + gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
> + usleep_range(1000, 2000);
> +
> + gpiod_set_value_cansleep(pdata->gpiod_pd, 0);
> + usleep_range(1000, 2000);
> +
> + gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
> +
> + dev_dbg(dev, "power on\n");
> +}
> +
> +void anx78xx_poweroff(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + struct anx78xx_platform_data *pdata = anx78xx->pdata;
> +
> + gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
> + usleep_range(1000, 2000);
> +
> + gpiod_set_value_cansleep(pdata->gpiod_pd, 1);
> + usleep_range(1000, 2000);
> +
> + dev_dbg(dev, "power down\n");
nit: off?
> +}
> +
> +static int anx78xx_init_gpio(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + struct anx78xx_platform_data *pdata = anx78xx->pdata;
> + int ret;
> +
> + /* gpio for chip power down */
> + pdata->gpiod_pd = devm_gpiod_get(dev, "pd", GPIOD_OUT_HIGH);
> + if (IS_ERR(pdata->gpiod_pd)) {
> + dev_err(dev, "unable to claim pd gpio\n");
> + ret = PTR_ERR(pdata->gpiod_pd);
> + return ret;
No need for the variable ret, just return PTR_ERR. Same below.
> + }
> +
> + /* gpio for chip reset */
> + pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(pdata->gpiod_reset)) {
> + dev_err(dev, "unable to claim reset gpio\n");
> + ret = PTR_ERR(pdata->gpiod_reset);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int anx78xx_system_init(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + int ret;
> +
> + ret = sp_chip_detect(anx78xx);
> + if (ret == 0) {
if (!sp_chip_detect(...)) {
> + anx78xx_poweroff(anx78xx);
> + dev_err(dev, "failed to detect anx78xx\n");
> + return -ENODEV;
> + }
> +
> + sp_tx_variable_init();
> + return 0;
> +}
> +
> +static void anx78xx_work_func(struct work_struct *work)
> +{
> + struct anx78xx *anx78xx = container_of(work, struct anx78xx,
> + work.work);
> + int workqueu_timer = 0;
> +
> + if (sp_tx_cur_states() >= STATE_PLAY_BACK)
> + workqueu_timer = 500;
workqueue
> + else
> + workqueu_timer = 100;
> + mutex_lock(&anx78xx->lock);
> + sp_main_process(anx78xx);
> + mutex_unlock(&anx78xx->lock);
> + queue_delayed_work(anx78xx->workqueue, &anx78xx->work,
> + msecs_to_jiffies(workqueu_timer));
> +}
> +
> +static int anx78xx_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct anx78xx *anx78xx;
> + int ret;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_I2C_BLOCK)) {
> + dev_err(&client->dev, "i2c bus does not support the device\n");
> + return -ENODEV;
> + }
> +
> + anx78xx = devm_kzalloc(&client->dev,
> + sizeof(struct anx78xx),
> + GFP_KERNEL);
> + if (!anx78xx)
> + return -ENOMEM;
> +
> + anx78xx->pdata = devm_kzalloc(&client->dev,
> + sizeof(struct anx78xx_platform_data),
> + GFP_KERNEL);
> + if (!anx78xx->pdata)
> + return -ENOMEM;
> +
> + anx78xx->client = client;
> +
> + i2c_set_clientdata(client, anx78xx);
> +
> + mutex_init(&anx78xx->lock);
> +
> + ret = anx78xx_init_gpio(anx78xx);
> + if (ret) {
> + dev_err(&client->dev, "failed to initialize gpios\n");
> + return ret;
> + }
> +
> + INIT_DELAYED_WORK(&anx78xx->work, anx78xx_work_func);
> +
> + anx78xx->workqueue = create_singlethread_workqueue("anx78xx_work");
> + if (anx78xx->workqueue == NULL) {
> + dev_err(&client->dev, "failed to create work queue\n");
> + return -ENOMEM;
> + }
> +
> + ret = anx78xx_system_init(anx78xx);
> + if (ret) {
> + dev_err(&client->dev, "failed to initialize anx78xx\n");
> + goto cleanup;
> + }
> +
> + /* enable driver */
> + queue_delayed_work(anx78xx->workqueue, &anx78xx->work, 0);
> +
> + return 0;
> +
> +cleanup:
> + destroy_workqueue(anx78xx->workqueue);
> + return ret;
> +}
> +
> +static int anx78xx_i2c_remove(struct i2c_client *client)
> +{
> + struct anx78xx *anx78xx = i2c_get_clientdata(client);
> +
> + destroy_workqueue(anx78xx->workqueue);
> +
> + return 0;
> +}
> +
> +static int anx78xx_i2c_suspend(struct device *dev)
> +{
> + struct i2c_client *client = container_of(dev, struct i2c_client, dev);
> + struct anx78xx *anx78xx = i2c_get_clientdata(client);
> +
> + cancel_delayed_work_sync(&anx78xx->work);
> + flush_workqueue(anx78xx->workqueue);
> + anx78xx_poweroff(anx78xx);
> + sp_tx_clean_state_machine();
> +
> + return 0;
> +}
> +
> +static int anx78xx_i2c_resume(struct device *dev)
> +{
> + struct i2c_client *client = container_of(dev, struct i2c_client, dev);
> + struct anx78xx *anx78xx = i2c_get_clientdata(client);
> +
> + queue_delayed_work(anx78xx->workqueue, &anx78xx->work, 0);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(anx78xx_i2c_pm_ops,
> + anx78xx_i2c_suspend, anx78xx_i2c_resume);
> +
> +static const struct i2c_device_id anx78xx_id[] = {
> + {"anx7814", 0},
> + { /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, anx78xx_id);
> +
> +static const struct of_device_id anx78xx_match_table[] = {
> + {.compatible = "analogix,anx7814",},
> + { /* sentinel */ },
> +};
> +
> +MODULE_DEVICE_TABLE(of, anx78xx_match_table);
> +
> +static struct i2c_driver anx78xx_driver = {
> + .driver = {
> + .name = "anx7814",
> + .pm = &anx78xx_i2c_pm_ops,
> + .of_match_table = of_match_ptr(anx78xx_match_table),
> + },
> + .probe = anx78xx_i2c_probe,
> + .remove = anx78xx_i2c_remove,
> + .id_table = anx78xx_id,
> +};
> +
> +module_i2c_driver(anx78xx_driver);
> +
> +MODULE_DESCRIPTION("Slimport transmitter ANX78XX driver");
> +MODULE_AUTHOR("Junhua Xia <jxia@xxxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_VERSION("1.1");
> diff --git a/drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.c b/drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.c
> new file mode 100644
> index 0000000..1be7f69
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.c
> @@ -0,0 +1,3198 @@
> +/*
> + * Copyright(c) 2015, Analogix Semiconductor. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <linux/delay.h>
> +#include <linux/types.h>
> +
> +#include "anx78xx.h"
> +#include "slimport_tx_drv.h"
> +
> +#define XTAL_CLK_M10 pxtal_data[XTAL_27M].xtal_clk_m10
> +#define XTAL_CLK pxtal_data[XTAL_27M].xtal_clk
> +
> +struct slimport {
> + int block_en; /* HDCP control enable/ disable from AP */
> +
> + u8 tx_test_bw;
> + bool tx_test_lt;
> + bool tx_test_edid;
> +
> + u8 changed_bandwidth;
> +
> + u8 hdmi_dvi_status;
> + u8 need_clean_status;
> +
> + u8 ds_vid_stb_cntr;
> + u8 hdcp_fail_count;
> +
> + u8 edid_break;
As far as I can see, this is a boolean, and it's only used as some indirect
return value for the EDID read functions. Please remove it.
> + u8 edid_checksum;
> + u8 edid_blocks[256];
> +
> + u8 read_edid_flag;
> +
> + u8 down_sample_en;
> +
> + struct packet_avi tx_packet_avi;
> + struct packet_spd tx_packet_spd;
> + struct packet_mpeg tx_packet_mpeg;
> + struct audio_info_frame tx_audioinfoframe;
> +
> + struct common_int common_int_status;
> + struct hdmi_rx_int hdmi_rx_int_status;
> +
> + enum sp_tx_state tx_system_state;
> + enum sp_tx_state tx_system_state_bak;
> + enum audio_output_status tx_ao_state;
> + enum video_output_status tx_vo_state;
> + enum sink_connection_status tx_sc_state;
> + enum sp_tx_lt_status tx_lt_state;
> + enum hdcp_status hcdp_state;
> +};
> +
> +static struct slimport sp;
> +
> +static const u16 chipid_list[] = {
> + 0x7818,
> + 0x7816,
> + 0x7814,
> + 0x7812,
> + 0x7810,
> + 0x7806,
> + 0x7802
> +};
> +
> +static void sp_hdmi_rx_new_vsi_int(struct anx78xx *anx78xx);
> +static u8 sp_hdcp_cap_check(struct anx78xx *anx78xx);
> +static void sp_tx_show_information(struct anx78xx *anx78xx);
> +static void sp_print_sys_state(struct anx78xx *anx78xx, u8 ss);
> +
> +static int sp_read_reg(struct anx78xx *anx78xx, u8 slave_addr,
> + u8 offset, u8 *buf)
nit: I think we generally prefer to see the second line aligned with (.
> +{
> + u8 ret;
> + struct i2c_client *client = anx78xx->client;
> +
> + client->addr = (slave_addr >> 1);
> +
> + ret = i2c_smbus_read_byte_data(client, offset);
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to read i2c addr=%x\n",
> + slave_addr);
> + return ret;
> + }
> +
> + *buf = ret;
> +
> + return 0;
> +}
> +
> +static int sp_write_reg(struct anx78xx *anx78xx, u8 slave_addr,
> + u8 offset, u8 value)
> +{
> + int ret;
> + struct i2c_client *client = anx78xx->client;
> +
> + client->addr = (slave_addr >> 1);
> +
> + ret = i2c_smbus_write_byte_data(client, offset, value);
> + if (ret < 0)
> + dev_err(&client->dev, "failed to write i2c addr=%x\n",
> + slave_addr);
> +
> + return ret;
> +}
> +
> +static u8 sp_i2c_read_byte(struct anx78xx *anx78xx,
> + u8 dev, u8 offset)
> +{
> + u8 ret;
> +
> + sp_read_reg(anx78xx, dev, offset, &ret);
> + return ret;
> +}
> +
> +static void sp_reg_bit_ctl(struct anx78xx *anx78xx, u8 addr, u8 offset,
> + u8 data, bool enable)
> +{
> + u8 c;
> +
> + sp_read_reg(anx78xx, addr, offset, &c);
> + if (enable) {
> + if ((c & data) != data) {
> + c |= data;
> + sp_write_reg(anx78xx, addr, offset, c);
> + }
> + } else
> + if ((c & data) == data) {
> + c &= ~data;
> + sp_write_reg(anx78xx, addr, offset, c);
> + }
> +}
> +
> +static inline void sp_write_reg_or(struct anx78xx *anx78xx, u8 address,
> + u8 offset, u8 mask)
> +{
> + sp_write_reg(anx78xx, address, offset,
> + sp_i2c_read_byte(anx78xx, address, offset) | mask);
> +}
> +
> +static inline void sp_write_reg_and(struct anx78xx *anx78xx, u8 address,
> + u8 offset, u8 mask)
> +{
> + sp_write_reg(anx78xx, address, offset,
> + sp_i2c_read_byte(anx78xx, address, offset) & mask);
> +}
> +
> +static inline void sp_write_reg_and_or(struct anx78xx *anx78xx, u8 address,
> + u8 offset, u8 and_mask, u8 or_mask)
> +{
> + sp_write_reg(anx78xx, address, offset,
> + (sp_i2c_read_byte(anx78xx, address, offset) & and_mask) | or_mask);
> +}
> +
> +static inline void sp_write_reg_or_and(struct anx78xx *anx78xx, u8 address,
> + u8 offset, u8 or_mask, u8 and_mask)
> +{
> + sp_write_reg(anx78xx, address, offset,
> + (sp_i2c_read_byte(anx78xx, address, offset) | or_mask) & and_mask);
> +}
> +
> +static inline void sp_tx_video_mute(struct anx78xx *anx78xx, bool enable)
> +{
> + sp_reg_bit_ctl(anx78xx, TX_P2, VID_CTRL1, VIDEO_MUTE, enable);
> +}
> +
> +static inline void hdmi_rx_mute_audio(struct anx78xx *anx78xx, bool enable)
> +{
> + sp_reg_bit_ctl(anx78xx, RX_P0, RX_MUTE_CTRL, AUD_MUTE, enable);
> +}
> +
> +static inline void hdmi_rx_mute_video(struct anx78xx *anx78xx, bool enable)
> +{
> + sp_reg_bit_ctl(anx78xx, RX_P0, RX_MUTE_CTRL, VID_MUTE, enable);
> +}
> +
> +static inline void sp_tx_addronly_set(struct anx78xx *anx78xx, bool enable)
> +{
> + sp_reg_bit_ctl(anx78xx, TX_P0, AUX_CTRL2, ADDR_ONLY_BIT, enable);
> +}
> +
> +static inline void sp_tx_set_link_bw(struct anx78xx *anx78xx, u8 bw)
> +{
> + sp_write_reg(anx78xx, TX_P0, SP_TX_LINK_BW_SET_REG, bw);
> +}
> +
> +static inline u8 sp_tx_get_link_bw(struct anx78xx *anx78xx)
> +{
> + return sp_i2c_read_byte(anx78xx, TX_P0, SP_TX_LINK_BW_SET_REG);
> +}
You should mask bits 4:0. Bit 5 has another purpose, and 7:6 are reserved.
Same above, only bits 4:0 should be updated.
> +
> +static inline bool sp_tx_get_pll_lock_status(struct anx78xx *anx78xx)
> +{
> + u8 temp;
> +
> + temp = sp_i2c_read_byte(anx78xx, TX_P0, TX_DEBUG1);
> +
> + return (temp & DEBUG_PLL_LOCK) != 0 ? true : false;
> +}
return (temp & DEBUG_PLL_LOCK) != 0;
> +
> +static inline void gen_m_clk_with_downspeading(struct anx78xx *anx78xx)
> +{
> + sp_write_reg_or(anx78xx, TX_P0, SP_TX_M_CALCU_CTRL, M_GEN_CLK_SEL);
> +}
> +
> +static inline void gen_m_clk_without_downspeading(struct anx78xx *anx78xx)
> +{
> + sp_write_reg_and(anx78xx, TX_P0, SP_TX_M_CALCU_CTRL, (~M_GEN_CLK_SEL));
> +}
> +
> +static inline void hdmi_rx_set_hpd(struct anx78xx *anx78xx, bool enable)
> +{
> + if (enable)
> + sp_write_reg_or(anx78xx, TX_P2, SP_TX_VID_CTRL3_REG, HPD_OUT);
> + else
> + sp_write_reg_and(anx78xx, TX_P2, SP_TX_VID_CTRL3_REG, ~HPD_OUT);
> +}
> +
> +static inline void hdmi_rx_set_termination(struct anx78xx *anx78xx,
> + bool enable)
> +{
> + if (enable)
> + sp_write_reg_and(anx78xx, RX_P0, HDMI_RX_TMDS_CTRL_REG7,
> + ~TERM_PD);
> + else
> + sp_write_reg_or(anx78xx, RX_P0, HDMI_RX_TMDS_CTRL_REG7,
> + TERM_PD);
> +}
> +
> +static inline void sp_tx_clean_hdcp_status(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + sp_write_reg(anx78xx, TX_P0, TX_HDCP_CTRL0, 0x03);
> + sp_write_reg_or(anx78xx, TX_P0, TX_HDCP_CTRL0, RE_AUTH);
> + usleep_range(2000, 4000);
> + dev_dbg(dev, "sp_tx_clean_hdcp_status\n");
> +}
> +
> +static inline void sp_tx_link_phy_initialization(struct anx78xx *anx78xx)
> +{
> + sp_write_reg(anx78xx, TX_P2, SP_TX_ANALOG_CTRL0, 0x02);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG0, 0x01);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG10, 0x00);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG1, 0x03);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG11, 0x00);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG2, 0x07);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG12, 0x00);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG3, 0x7f);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG13, 0x00);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG4, 0x71);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG14, 0x0c);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG5, 0x6b);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG15, 0x42);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG6, 0x7f);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG16, 0x1e);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG7, 0x73);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG17, 0x3e);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG8, 0x7f);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG18, 0x72);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG9, 0x7F);
> + sp_write_reg(anx78xx, TX_P1, SP_TX_LT_CTRL_REG19, 0x7e);
> +}
> +
> +static inline void sp_tx_set_sys_state(struct anx78xx *anx78xx, u8 ss)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + dev_dbg(dev, "set: clean_status: %x,\n ", (u16)sp.need_clean_status);
That cast should not be required... There are a lot of these, in almost every
dev_dbg, please check.
> +
> + if ((sp.tx_system_state >= STATE_LINK_TRAINING)
> + && (ss < STATE_LINK_TRAINING))
> + sp_write_reg_or(anx78xx, TX_P0, SP_TX_ANALOG_PD_REG, CH0_PD);
> +
> + sp.tx_system_state_bak = sp.tx_system_state;
> + sp.tx_system_state = ss;
> + sp.need_clean_status = 1;
> + sp_print_sys_state(anx78xx, sp.tx_system_state);
> +}
> +
> +static inline void reg_hardware_reset(struct anx78xx *anx78xx)
> +{
> + sp_write_reg_or(anx78xx, TX_P2, SP_TX_RST_CTRL_REG, HW_RST);
> + sp_tx_clean_state_machine();
> + sp_tx_set_sys_state(anx78xx, STATE_SP_INITIALIZED);
> + msleep(500);
> +}
> +
> +static inline void write_dpcd_addr(struct anx78xx *anx78xx, u8 addrh,
> + u8 addrm, u8 addrl)
> +{
> + u8 temp;
> +
> + if (sp_i2c_read_byte(anx78xx, TX_P0, AUX_ADDR_7_0) != addrl)
> + sp_write_reg(anx78xx, TX_P0, AUX_ADDR_7_0, addrl);
> +
> + if (sp_i2c_read_byte(anx78xx, TX_P0, AUX_ADDR_15_8) != addrm)
> + sp_write_reg(anx78xx, TX_P0, AUX_ADDR_15_8, addrm);
> +
> + sp_read_reg(anx78xx, TX_P0, AUX_ADDR_19_16, &temp);
> +
> + if ((temp & 0x0F) != (addrh & 0x0F))
> + sp_write_reg(anx78xx, TX_P0, AUX_ADDR_19_16,
> + (temp & 0xF0) | addrh);
> +}
> +
> +static inline void goto_next_system_state(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + dev_dbg(dev, "next: clean_status: %x,\n ", (u16)sp.need_clean_status);
Remove space after \n (there are a number of other ones, please remove those
too).
> +
> + sp.tx_system_state_bak = sp.tx_system_state;
> + sp.tx_system_state++;
No overflow check? Generally, I'm not really convinced by this state machine
concept. Can't you set sp.tx_system_state directly?
> + sp_print_sys_state(anx78xx, sp.tx_system_state);
> +}
> +
> +static inline void redo_cur_system_state(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + dev_dbg(dev, "redo: clean_status: %x,\n ", (u16)sp.need_clean_status);
> +
> + sp.need_clean_status = 1;
> + sp.tx_system_state_bak = sp.tx_system_state;
> + sp_print_sys_state(anx78xx, sp.tx_system_state);
> +}
> +
> +static inline void system_state_change_with_case(struct anx78xx *anx78xx,
> + u8 status)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + if (sp.tx_system_state >= status) {
> + dev_dbg(dev, "change_case: clean_status: %xm,\n ",
> + (u16)sp.need_clean_status);
> +
> + if ((sp.tx_system_state >= STATE_LINK_TRAINING)
> + && (status < STATE_LINK_TRAINING))
> + sp_write_reg_or(anx78xx, TX_P0, SP_TX_ANALOG_PD_REG,
> + CH0_PD);
> +
> + sp.need_clean_status = 1;
> + sp.tx_system_state_bak = sp.tx_system_state;
> + sp.tx_system_state = status;
> + sp_print_sys_state(anx78xx, sp.tx_system_state);
> + }
> +}
> +
> +static void sp_wait_aux_op_finish(struct anx78xx *anx78xx, u8 *err_flag)
Can this function return an int instead of using a pointer for the error
value?
> +{
> + u8 cnt;
> + u8 c;
> + struct device *dev = &anx78xx->client->dev;
> +
> + *err_flag = 0;
> + cnt = 150;
> + while (sp_i2c_read_byte(anx78xx, TX_P0, AUX_CTRL2) & AUX_OP_EN) {
> + usleep_range(2000, 4000);
> + if ((cnt--) == 0) {
> + dev_err(dev, "aux operate failed!\n");
> + *err_flag = 1;
> + break;
> + }
> + }
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_AUX_STATUS, &c);
> + if (c & 0x0F) {
> + dev_err(dev, "wait aux operation status %.2x\n", (u16)c);
> + *err_flag = 1;
> + }
> +}
> +
> +static void sp_print_sys_state(struct anx78xx *anx78xx, u8 ss)
print_system_state
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + switch (ss) {
> + case STATE_WAITTING_CABLE_PLUG:
> + dev_dbg(dev, "-STATE_WAITTING_CABLE_PLUG-\n");
> + break;
> + case STATE_SP_INITIALIZED:
> + dev_dbg(dev, "-STATE_SP_INITIALIZED-\n");
> + break;
> + case STATE_SINK_CONNECTION:
> + dev_dbg(dev, "-STATE_SINK_CONNECTION-\n");
> + break;
> + case STATE_PARSE_EDID:
> + dev_dbg(dev, "-STATE_PARSE_EDID-\n");
> + break;
> + case STATE_LINK_TRAINING:
> + dev_dbg(dev, "-STATE_LINK_TRAINING-\n");
> + break;
> + case STATE_VIDEO_OUTPUT:
> + dev_dbg(dev, "-STATE_VIDEO_OUTPUT-\n");
> + break;
> + case STATE_HDCP_AUTH:
> + dev_dbg(dev, "-STATE_HDCP_AUTH-\n");
> + break;
> + case STATE_AUDIO_OUTPUT:
> + dev_dbg(dev, "-STATE_AUDIO_OUTPUT-\n");
> + break;
> + case STATE_PLAY_BACK:
> + dev_dbg(dev, "-STATE_PLAY_BACK-\n");
> + break;
> + default:
> + dev_err(dev, "system state is error1\n");
error1?
> + break;
> + }
> +}
> +
> +static void sp_tx_rst_aux(struct anx78xx *anx78xx)
> +{
> + sp_write_reg_or(anx78xx, TX_P2, RST_CTRL2, AUX_RST);
> + sp_write_reg_and(anx78xx, TX_P2, RST_CTRL2, ~AUX_RST);
> +}
> +
> +static u8 sp_tx_aux_dpcdread_bytes(struct anx78xx *anx78xx, u8 addrh,
> + u8 addrm, u8 addrl, u8 ccount, u8 *pbuf)
Return a bool?
> +{
> + u8 c, c1, i;
> + u8 bok;
> + struct device *dev = &anx78xx->client->dev;
> +
> + sp_write_reg(anx78xx, TX_P0, BUF_DATA_COUNT, 0x80);
> + c = ((ccount - 1) << 4) | 0x09;
> + sp_write_reg(anx78xx, TX_P0, AUX_CTRL, c);
You don't really need c here, write the value directly.
> + write_dpcd_addr(anx78xx, addrh, addrm, addrl);
> + sp_write_reg_or(anx78xx, TX_P0, AUX_CTRL2, AUX_OP_EN);
> + usleep_range(2000, 4000);
> +
> + sp_wait_aux_op_finish(anx78xx, &bok);
> + if (bok == AUX_ERR) {
> + dev_err(dev, "aux read failed\n");
> + sp_read_reg(anx78xx, TX_P2, SP_TX_INT_STATUS1, &c);
> + sp_read_reg(anx78xx, TX_P0, TX_DEBUG1, &c1);
I'd prefer meaningful names for c/c1.
> + if (c1 & POLLING_EN) {
> + if (c & POLLING_ERR)
> + sp_tx_rst_aux(anx78xx);
> + } else
> + sp_tx_rst_aux(anx78xx);
Brackets around else block, or, more simply:
if (!(c1 & POLLING_EN) || (c & POLLING_ERR))
sp_tx_rst_aux(anx78xx);
> + return AUX_ERR;
> + }
> +
> + for (i = 0; i < ccount; i++) {
> + sp_read_reg(anx78xx, TX_P0, BUF_DATA_0 + i, &c);
> + *(pbuf + i) = c;
> + if (i >= MAX_BUF_CNT)
> + break;
> + }
> + return AUX_OK;
> +}
> +
> +static u8 sp_tx_aux_dpcdwrite_bytes(struct anx78xx *anx78xx, u8 addrh,
> + u8 addrm, u8 addrl, u8 ccount, u8 *pbuf)
> +{
> + u8 c, i, ret;
> +
> + c = ((ccount - 1) << 4) | 0x08;
> + sp_write_reg(anx78xx, TX_P0, AUX_CTRL, c);
> + write_dpcd_addr(anx78xx, addrh, addrm, addrl);
> + for (i = 0; i < ccount; i++) {
> + c = *pbuf;
> + pbuf++;
> + sp_write_reg(anx78xx, TX_P0, BUF_DATA_0 + i, c);
> +
> + if (i >= 15)
> + break;
Why?
> + }
> + sp_write_reg_or(anx78xx, TX_P0, AUX_CTRL2, AUX_OP_EN);
> + sp_wait_aux_op_finish(anx78xx, &ret);
> + return ret;
> +}
> +
> +static u8 sp_tx_aux_dpcdwrite_byte(struct anx78xx *anx78xx, u8 addrh,
> + u8 addrm, u8 addrl, u8 data1)
> +{
> + u8 ret;
> +
> + sp_write_reg(anx78xx, TX_P0, AUX_CTRL, 0x08);
> + write_dpcd_addr(anx78xx, addrh, addrm, addrl);
> + sp_write_reg(anx78xx, TX_P0, BUF_DATA_0, data1);
> + sp_write_reg_or(anx78xx, TX_P0, AUX_CTRL2, AUX_OP_EN);
> + sp_wait_aux_op_finish(anx78xx, &ret);
> + return ret;
> +}
> +
> +static void sp_block_power_ctrl(struct anx78xx *anx78xx,
> + enum sp_tx_power_block sp_tx_pd_block, u8 power)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + if (power == SP_POWER_ON)
> + sp_write_reg_and(anx78xx, TX_P2, SP_POWERD_CTRL_REG,
> + ~sp_tx_pd_block);
> + else
> + sp_write_reg_or(anx78xx, TX_P2, SP_POWERD_CTRL_REG,
> + sp_tx_pd_block);
> +
> + dev_dbg(dev, "sp_tx_power_on: %.2x\n", (u16)sp_tx_pd_block);
Is that cast needed?
> +}
> +
> +static void sp_vbus_power_off(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + int i;
> +
> + for (i = 0; i < 5; i++) {
> + sp_write_reg_and(anx78xx, TX_P2, TX_PLL_FILTER5,
> + (~P5V_PROTECT_PD & ~SHORT_PROTECT_PD));
> + sp_write_reg_or(anx78xx, TX_P2, TX_PLL_FILTER, V33_SWITCH_ON);
> + if (!(sp_i2c_read_byte(anx78xx, TX_P2, TX_PLL_FILTER5)
> + & 0xc0)) {
> + dev_dbg(dev, "3.3V output enabled\n");
> + break;
> + }
> +
> + dev_dbg(dev, "VBUS power can not be supplied\n");
I find this message confusing... The function is supposed to power off vbus?
> + }
> +}
> +
> +void sp_tx_clean_state_machine(void)
> +{
> + sp.tx_system_state = STATE_WAITTING_CABLE_PLUG;
> + sp.tx_system_state_bak = STATE_WAITTING_CABLE_PLUG;
> + sp.tx_sc_state = SC_INIT;
> + sp.tx_lt_state = LT_INIT;
> + sp.hcdp_state = HDCP_CAPABLE_CHECK;
> + sp.tx_vo_state = VO_WAIT_VIDEO_STABLE;
> + sp.tx_ao_state = AO_INIT;
> +}
> +
> +u8 sp_tx_cur_states(void)
current_state? Also, return value should be the enum type.
> +{
> + return sp.tx_system_state;
> +}
> +
> +void sp_tx_variable_init(void)
> +{
> + u16 i;
> +
> + sp.block_en = 1;
> +
> + sp.tx_system_state = STATE_WAITTING_CABLE_PLUG;
> + sp.tx_system_state_bak = STATE_WAITTING_CABLE_PLUG;
> +
> + sp.edid_break = 0;
> + sp.read_edid_flag = 0;
> + sp.edid_checksum = 0;
> + for (i = 0; i < 256; i++)
> + sp.edid_blocks[i] = 0;
Use memset.
> + sp.tx_lt_state = LT_INIT;
> + sp.hcdp_state = HDCP_CAPABLE_CHECK;
> + sp.need_clean_status = 0;
> + sp.tx_sc_state = SC_INIT;
> + sp.tx_vo_state = VO_WAIT_VIDEO_STABLE;
> + sp.tx_ao_state = AO_INIT;
> + sp.changed_bandwidth = LINK_5P4G;
> + sp.hdmi_dvi_status = HDMI_MODE;
> +
> + sp.tx_test_lt = 0;
> + sp.tx_test_bw = 0;
> + sp.tx_test_edid = 0;
> +
> + sp.ds_vid_stb_cntr = 0;
> + sp.hdcp_fail_count = 0;
> +
> +}
> +
> +static void hdmi_rx_tmds_phy_initialization(struct anx78xx *anx78xx)
> +{
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_TMDS_CTRL_REG2, 0xa9);
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_TMDS_CTRL_REG7, 0x80);
> +
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_TMDS_CTRL_REG1, 0x90);
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_TMDS_CTRL_REG6, 0x92);
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_TMDS_CTRL_REG20, 0xf2);
Please define these magic numbers.
> +}
> +
> +static void hdmi_rx_initialization(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + sp_write_reg(anx78xx, RX_P0, RX_MUTE_CTRL, AUD_MUTE | VID_MUTE);
> + sp_write_reg_or(anx78xx, RX_P0, RX_CHIP_CTRL,
> + MAN_HDMI5V_DET | PLLLOCK_CKDT_EN | DIGITAL_CKDT_EN);
> +
> + sp_write_reg_or(anx78xx, RX_P0, RX_SRST, HDCP_MAN_RST | SW_MAN_RST |
> + TMDS_RST | VIDEO_RST);
> + sp_write_reg_and(anx78xx, RX_P0, RX_SRST, ~HDCP_MAN_RST &
> + ~SW_MAN_RST & ~TMDS_RST & ~VIDEO_RST);
> +
> + sp_write_reg_or(anx78xx, RX_P0, RX_AEC_EN0, AEC_EN06 | AEC_EN05);
> + sp_write_reg_or(anx78xx, RX_P0, RX_AEC_EN2, AEC_EN21);
> + sp_write_reg_or(anx78xx, RX_P0, RX_AEC_CTRL, AVC_EN | AAC_OE | AAC_EN);
> +
> + sp_write_reg_and(anx78xx, RX_P0, RX_SYS_PWDN1, ~PWDN_CTRL);
> +
> + sp_write_reg_or(anx78xx, RX_P0, RX_VID_DATA_RNG, R2Y_INPUT_LIMIT);
> + sp_write_reg(anx78xx, RX_P0, 0x65, 0xc4);
> + sp_write_reg(anx78xx, RX_P0, 0x66, 0x18);
More magic numbers. Please define both register address and value.
> + /* enable DDC stretch */
> + sp_write_reg(anx78xx, TX_P0, TX_EXTRA_ADDR, 0x50);
> +
> + hdmi_rx_tmds_phy_initialization(anx78xx);
> + hdmi_rx_set_hpd(anx78xx, 0);
> + hdmi_rx_set_termination(anx78xx, 0);
> + dev_dbg(dev, "HDMI Rx is initialized...\n");
> +}
> +
> +struct anx78xx_clock_data const pxtal_data[XTAL_CLK_NUM] = {
> + {19, 192},
> + {24, 240},
> + {25, 250},
> + {26, 260},
> + {27, 270},
> + {38, 384},
> + {52, 520},
> + {27, 270},
> +};
> +
> +static void xtal_clk_sel(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + dev_dbg(dev, "define XTAL_CLK: %x\n ", (u16)XTAL_27M);
Remove space after \n.
> + sp_write_reg_and_or(anx78xx, TX_P2,
> + TX_ANALOG_DEBUG2, (~0x3c), 0x3c & (XTAL_27M << 2));
> + sp_write_reg(anx78xx, TX_P0, 0xEC, (u8)(((u16)XTAL_CLK_M10)));
> + sp_write_reg(anx78xx, TX_P0, 0xED,
> + (u8)(((u16)XTAL_CLK_M10 & 0xFF00) >> 2) | XTAL_CLK);
> +
> + sp_write_reg(anx78xx, TX_P0,
> + I2C_GEN_10US_TIMER0, (u8)(((u16)XTAL_CLK_M10)));
> + sp_write_reg(anx78xx, TX_P0, I2C_GEN_10US_TIMER1,
> + (u8)(((u16)XTAL_CLK_M10 & 0xFF00) >> 8));
> + sp_write_reg(anx78xx, TX_P0, 0xBF, (u8)(((u16)XTAL_CLK - 1)));
> +
> + sp_write_reg_and_or(anx78xx, RX_P0, 0x49, 0x07,
> + (u8)(((((u16)XTAL_CLK) >> 1) - 2) << 3));
Many magic numbers, and too many parentheses in many cases.
> +
> +}
> +
> +void sp_tx_initialization(struct anx78xx *anx78xx)
> +{
> + sp_write_reg(anx78xx, TX_P0, AUX_CTRL2, 0x30);
> + sp_write_reg_or(anx78xx, TX_P0, AUX_CTRL2, 0x08);
> +
> + sp_write_reg_and(anx78xx, TX_P0, TX_HDCP_CTRL,
> + (u8)(~AUTO_EN) & (~AUTO_START));
> + sp_write_reg(anx78xx, TX_P0, OTP_KEY_PROTECT1, OTP_PSW1);
> + sp_write_reg(anx78xx, TX_P0, OTP_KEY_PROTECT2, OTP_PSW2);
> + sp_write_reg(anx78xx, TX_P0, OTP_KEY_PROTECT3, OTP_PSW3);
> + sp_write_reg_or(anx78xx, TX_P0, HDCP_KEY_CMD, DISABLE_SYNC_HDCP);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_VID_CTRL8_REG, VID_VRES_TH);
> +
> + sp_write_reg(anx78xx, TX_P0, HDCP_AUTO_TIMER, HDCP_AUTO_TIMER_VAL);
> + sp_write_reg_or(anx78xx, TX_P0, TX_HDCP_CTRL, LINK_POLLING);
> +
> + sp_write_reg_or(anx78xx, TX_P0, TX_LINK_DEBUG, M_VID_DEBUG);
> + sp_write_reg_or(anx78xx, TX_P2, TX_ANALOG_DEBUG2, POWERON_TIME_1P5MS);
> +
> + xtal_clk_sel(anx78xx);
> + sp_write_reg(anx78xx, TX_P0, AUX_DEFER_CTRL, 0x8C);
> +
> + sp_write_reg_or(anx78xx, TX_P0, TX_DP_POLLING, AUTO_POLLING_DISABLE);
> + /*
> + * Short the link intergrity check timer to speed up bstatus
> + * polling for HDCP CTS item 1A-07
> + */
> + sp_write_reg(anx78xx, TX_P0, SP_TX_LINK_CHK_TIMER, 0x1d);
> + sp_write_reg_or(anx78xx, TX_P0, TX_MISC, EQ_TRAINING_LOOP);
> +
> + sp_write_reg_or(anx78xx, TX_P0, SP_TX_ANALOG_PD_REG, CH0_PD);
> +
> + sp_write_reg(anx78xx, TX_P2, SP_TX_INT_CTRL_REG, 0X01);
> + /* disable HDCP mismatch function for VGA dongle */
> + sp_tx_link_phy_initialization(anx78xx);
> + gen_m_clk_with_downspeading(anx78xx);
> +
> + sp.down_sample_en = 0;
> +}
> +
> +bool sp_chip_detect(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u16 id;
> + u8 idh = 0, idl = 0;
> + int i;
> +
> + anx78xx_poweron(anx78xx);
> +
> + /* check chip id */
> + sp_read_reg(anx78xx, TX_P2, SP_TX_DEV_IDL_REG, &idl);
> + sp_read_reg(anx78xx, TX_P2, SP_TX_DEV_IDH_REG, &idh);
> + id = idl | (idh << 8);
> +
> + dev_dbg(dev, "CHIPID: ANX%x\n", id & 0xffff);
> +
> + for (i = 0; i < sizeof(chipid_list) / sizeof(u16); i++) {
ARRAY_SIZE
> + if (id == chipid_list[i])
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static void sp_waiting_cable_plug_process(struct anx78xx *anx78xx)
> +{
> + sp_tx_variable_init();
> + anx78xx_poweron(anx78xx);
> + goto_next_system_state(anx78xx);
> +}
> +
> +/*
> + * Check if it is ANALOGIX dongle.
> + */
> +static const u8 ANX_OUI[3] = {0x00, 0x22, 0xB9};
> +
> +static u8 is_anx_dongle(struct anx78xx *anx78xx)
bool return value?
> +{
> + u8 buf[3];
> +
> + /* 0x0500~0x0502: BRANCH_IEEE_OUI */
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x05, 0x00, 3, buf);
> +
> + if (!memcmp(buf, ANX_OUI, 3))
> + return 1;
> +
> + return 0;
> +}
> +
> +static void sp_tx_get_rx_bw(struct anx78xx *anx78xx, u8 *bw)
> +{
> + if (is_anx_dongle(anx78xx))
Ah, so by is_anx_dongle you mean is _not_ anx_dongle, right?
> + *bw = LINK_6P75G; /* just for debug */
> + else
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x00,
> + DPCD_MAX_LINK_RATE, 1, bw);
> +}
> +
> +static u8 sp_tx_get_cable_type(struct anx78xx *anx78xx,
> + enum cable_type_status det_cable_type_state)
return the enum type.
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + u8 ds_port_preset;
> + u8 aux_status;
> + u8 data_buf[16];
> + u8 cur_cable_type;
> +
> + ds_port_preset = 0;
> + cur_cable_type = DWN_STRM_IS_NULL;
> +
> + aux_status = sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x00, 0x05, 1,
> + &ds_port_preset);
You only check the return value if state is CHECK_AUXCH, is that intentional?
> +
> + dev_dbg(dev, "DPCD 0x005: %x\n", (int)ds_port_preset);
> +
> + switch (det_cable_type_state) {
> + case CHECK_AUXCH:
> + if (AUX_OK == aux_status) {
aux_status == AUX_OK.
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x00, 0, 0x0c,
> + data_buf);
> + det_cable_type_state = GETTED_CABLE_TYPE;
> + } else {
> + dev_err(dev, " AUX access error\n");
> + break;
> + }
> + case GETTED_CABLE_TYPE:
> + switch ((ds_port_preset & (BIT(1) | BIT(2))) >> 1) {
> + case 0x00:
> + cur_cable_type = DWN_STRM_IS_DIGITAL;
> + dev_dbg(dev, "Downstream is DP dongle.\n");
> + break;
> + case 0x01:
> + case 0x03:
> + cur_cable_type = DWN_STRM_IS_ANALOG;
> + dev_dbg(dev, "Downstream is VGA dongle.\n");
> + break;
> + case 0x02:
> + cur_cable_type = DWN_STRM_IS_HDMI;
> + dev_dbg(dev, "Downstream is HDMI dongle.\n");
> + break;
> + default:
> + cur_cable_type = DWN_STRM_IS_NULL;
> + dev_err(dev, "Downstream can not recognized.\n");
> + break;
> + }
> + default:
> + break;
> + }
> + return cur_cable_type;
> +}
> +
> +static u8 sp_tx_get_dp_connection(struct anx78xx *anx78xx)
> +{
> + u8 c;
> +
> + if (AUX_OK != sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02,
> + DPCD_SINK_COUNT, 1, &c))
> + return 0;
> +
> + if (c & 0x1f) {
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x00, 0x04, 1, &c);
> + if (c & 0x20) {
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x06, 0x00, 1,
> + &c);
> + /*
> + * Bit 5 = SET_DN_DEVICE_DP_PWR_5V
> + * Bit 6 = SET_DN_DEVICE_DP_PWR_12V
> + * Bit 7 = SET_DN_DEVICE_DP_PWR_18V
> + */
> + c = c & 0x1F;
> + sp_tx_aux_dpcdwrite_byte(anx78xx, 0x00, 0x06, 0x00,
> + c | 0x20);
> + }
> + return 1;
> + } else
> + return 0;
Braces around else block.
> +}
> +
> +static u8 sp_tx_get_downstream_connection(struct anx78xx *anx78xx)
> +{
> + return sp_tx_get_dp_connection(anx78xx);
> +}
That function does not seem necessary...
> +
> +static void sp_sink_connection(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + switch (sp.tx_sc_state) {
> + case SC_INIT:
> + sp.tx_sc_state++;
> + case SC_CHECK_CABLE_TYPE:
> + case SC_WAITTING_CABLE_TYPE:
> + default:
> + if (sp_tx_get_cable_type(anx78xx, CHECK_AUXCH) ==
> + DWN_STRM_IS_NULL) {
Indentation.
> + sp.tx_sc_state++;
> + if (sp.tx_sc_state >= SC_WAITTING_CABLE_TYPE) {
> + sp.tx_sc_state = SC_NOT_CABLE;
> + dev_dbg(dev, "Can not get cable type!\n");
> + }
> + break;
> + }
> +
> + sp.tx_sc_state = SC_SINK_CONNECTED;
> + case SC_SINK_CONNECTED:
> + if (sp_tx_get_downstream_connection(anx78xx))
> + goto_next_system_state(anx78xx);
> + break;
> + case SC_NOT_CABLE:
> + sp_vbus_power_off(anx78xx);
> + reg_hardware_reset(anx78xx);
> + break;
> + }
> +}
> +
> +/******************start EDID process********************/
> +static void sp_tx_enable_video_input(struct anx78xx *anx78xx, u8 enable)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 c;
> +
> + sp_read_reg(anx78xx, TX_P2, VID_CTRL1, &c);
> + if (enable) {
> + c = (c & 0xf7) | VIDEO_EN;
What is that 0x08 bit that you unset?
> + sp_write_reg(anx78xx, TX_P2, VID_CTRL1, c);
> + dev_dbg(dev, "Slimport Video is enabled!\n");
> +
> + } else {
> + c &= ~VIDEO_EN;
> + sp_write_reg(anx78xx, TX_P2, VID_CTRL1, c);
> + dev_dbg(dev, "Slimport Video is disabled!\n");
> + }
> +}
> +
> +static u8 sp_get_edid_detail(u8 *data_buf)
> +{
> + u16 pixclock_edid;
> +
> + pixclock_edid = ((((u16)data_buf[1] << 8))
> + | ((u16)data_buf[0] & 0xFF));
> + if (pixclock_edid <= 5300)
> + return LINK_1P62G;
> + else if ((pixclock_edid > 5300) && (pixclock_edid <= 8900))
> + return LINK_2P7G;
> + else if ((pixclock_edid > 8900) && (pixclock_edid <= 18000))
> + return LINK_5P4G;
> + else
> + return LINK_6P75G;
> +}
> +
> +static u8 sp_parse_edid_to_get_bandwidth(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 desc_offset = 0;
> + u8 i, bandwidth, temp;
> +
> + bandwidth = LINK_1P62G;
> + temp = LINK_1P62G;
Not necessary.
> + i = 0;
> + while (i < 4 && sp.edid_blocks[0x36 + desc_offset] != 0) {
desc_offset = 0x12*i ?
Also, use a for loop...
> + temp = sp_get_edid_detail(sp.edid_blocks + 0x36 + desc_offset);
> + dev_dbg(dev, "bandwidth via EDID : %x\n", (u16)temp);
> + if (bandwidth < temp)
> + bandwidth = temp;
> + if (bandwidth > LINK_5P4G)
Might be clearer to say >= LINK_6P75G?
> + break;
> + desc_offset += 0x12;
> + ++i;
> + }
> + return bandwidth;
> +}
> +
> +static void sp_tx_aux_wr(struct anx78xx *anx78xx, u8 offset)
> +{
> + sp_write_reg(anx78xx, TX_P0, BUF_DATA_0, offset);
> + sp_write_reg(anx78xx, TX_P0, AUX_CTRL, 0x04);
> + sp_write_reg_or(anx78xx, TX_P0, AUX_CTRL2, AUX_OP_EN);
> + sp_wait_aux_op_finish(anx78xx, &sp.edid_break);
> +}
Please use a return value, instead of assigning some variable.
> +
> +static void sp_tx_aux_rd(struct anx78xx *anx78xx, u8 len_cmd)
> +{
> + sp_write_reg(anx78xx, TX_P0, AUX_CTRL, len_cmd);
> + sp_write_reg_or(anx78xx, TX_P0, AUX_CTRL2, AUX_OP_EN);
> + sp_wait_aux_op_finish(anx78xx, &sp.edid_break);
> +}
> +
> +static u8 sp_tx_get_edid_block(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 c;
> +
> + sp_tx_aux_wr(anx78xx, 0x7e);
> + sp_tx_aux_rd(anx78xx, 0x01);
> + sp_read_reg(anx78xx, TX_P0, BUF_DATA_0, &c);
> + dev_dbg(dev, "EDID Block = %d\n", (int)(c + 1));
> +
> + if (c > 3)
> + c = 1;
> + return c;
> +}
> +
> +static void sp_edid_read(struct anx78xx *anx78xx, u8 offset,
> + u8 *pblock_buf)
> +{
> + u8 data_cnt, cnt;
> + u8 c;
> +
> + sp_tx_aux_wr(anx78xx, offset);
> + sp_tx_aux_rd(anx78xx, 0xf5);
> + data_cnt = 0;
> + cnt = 0;
> +
> + while ((data_cnt) < 16) {
No parentheses around data_cnt.
> + sp_read_reg(anx78xx, TX_P0, BUF_DATA_COUNT, &c);
> +
> + if ((c & 0x1f) != 0) {
> + data_cnt = data_cnt + c;
Just before you masked 0x1f, and now you take the whole byte.
> + do {
> + sp_read_reg(anx78xx, TX_P0, BUF_DATA_0 + c - 1,
> + &(pblock_buf[c - 1]));
> + if (c == 1)
> + break;
> + } while (c--);
Please refactor this loop.
> + } else {
> + if (cnt++ <= 2) {
Ah, so cnt is some kind of error counter? Please use meaningful variable names.
> + sp_tx_rst_aux(anx78xx);
> + c = 0x05 | ((0x0f - data_cnt) << 4);
> + sp_tx_aux_rd(anx78xx, c);
> + } else {
> + sp.edid_break = 1;
> + break;
> + }
> + }
> + }
> + sp_write_reg(anx78xx, TX_P0, AUX_CTRL, 0x01);
> + sp_write_reg_or(anx78xx, TX_P0, AUX_CTRL2, ADDR_ONLY_BIT | AUX_OP_EN);
> + sp_wait_aux_op_finish(anx78xx, &sp.edid_break);
> + sp_tx_addronly_set(anx78xx, 0);
> +}
> +
> +static void sp_tx_edid_read_initial(struct anx78xx *anx78xx)
> +{
> + sp_write_reg(anx78xx, TX_P0, AUX_ADDR_7_0, 0x50);
> + sp_write_reg(anx78xx, TX_P0, AUX_ADDR_15_8, 0);
> + sp_write_reg_and(anx78xx, TX_P0, AUX_ADDR_19_16, 0xf0);
Magic numbers...
> +}
> +
> +static void sp_seg_edid_read(struct anx78xx *anx78xx,
> + u8 segment, u8 offset)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 c, cnt;
> + int i;
> +
> + sp_write_reg(anx78xx, TX_P0, AUX_CTRL, 0x04);
> +
> + sp_write_reg(anx78xx, TX_P0, AUX_ADDR_7_0, 0x30);
> +
> + sp_write_reg_or(anx78xx, TX_P0, AUX_CTRL2, ADDR_ONLY_BIT | AUX_OP_EN);
> +
> + sp_read_reg(anx78xx, TX_P0, AUX_CTRL2, &c);
> +
> + sp_wait_aux_op_finish(anx78xx, &sp.edid_break);
> + sp_read_reg(anx78xx, TX_P0, AUX_CTRL, &c);
> +
> + sp_write_reg(anx78xx, TX_P0, BUF_DATA_0, segment);
> +
> + sp_write_reg(anx78xx, TX_P0, AUX_CTRL, 0x04);
> +
> + sp_write_reg_and_or(anx78xx, TX_P0, AUX_CTRL2, ~ADDR_ONLY_BIT,
> + AUX_OP_EN);
> + cnt = 0;
> + sp_read_reg(anx78xx, TX_P0, AUX_CTRL2, &c);
> + while (c & AUX_OP_EN) {
> + usleep_range(1000, 2000);
> + cnt++;
> + if (cnt == 10) {
> + dev_dbg(dev, "write break");
What does this mean?
> + sp_tx_rst_aux(anx78xx);
> + cnt = 0;
Not needed...
> + sp.edid_break = 1;
> + return;
> + }
> + sp_read_reg(anx78xx, TX_P0, AUX_CTRL2, &c);
> +
> + }
> +
> + sp_write_reg(anx78xx, TX_P0, AUX_ADDR_7_0, 0x50);
> +
> + sp_tx_aux_wr(anx78xx, offset);
> +
> + sp_tx_aux_rd(anx78xx, 0xf5);
> + cnt = 0;
> + for (i = 0; i < 16; i++) {
> + sp_read_reg(anx78xx, TX_P0, BUF_DATA_COUNT, &c);
> + while ((c & 0x1f) == 0) {
> + usleep_range(2000, 4000);
> + cnt++;
> + sp_read_reg(anx78xx, TX_P0, BUF_DATA_COUNT, &c);
> + if (cnt == 10) {
> + dev_dbg(dev, "read break");
> + sp_tx_rst_aux(anx78xx);
> + sp.edid_break = 1;
> + return;
> + }
> + }
> +
> +
Remove extra blank line.
> + sp_read_reg(anx78xx, TX_P0, BUF_DATA_0+i, &c);
> + }
> +
> + sp_write_reg(anx78xx, TX_P0, AUX_CTRL, 0x01);
> + sp_write_reg_or(anx78xx, TX_P0, AUX_CTRL2, ADDR_ONLY_BIT | AUX_OP_EN);
> + sp_write_reg_and(anx78xx, TX_P0, AUX_CTRL2, ~ADDR_ONLY_BIT);
> + sp_read_reg(anx78xx, TX_P0, AUX_CTRL2, &c);
> + while (c & AUX_OP_EN)
> + sp_read_reg(anx78xx, TX_P0, AUX_CTRL2, &c);
Loop forever? So this one is guaranteed to complete?
> +}
> +
> +static bool sp_edid_checksum_result(u8 *pbuf)
> +{
> + u8 cnt, checksum;
> +
> + checksum = 0;
> +
> + for (cnt = 0; cnt < 0x80; cnt++)
> + checksum = checksum + pbuf[cnt];
> +
> + sp.edid_checksum = checksum - pbuf[0x7f];
> + sp.edid_checksum = ~sp.edid_checksum + 1;
> +
> + return checksum == 0 ? 1 : 0;
return checksum == 0;
> +}
> +
> +static void sp_edid_header_result(struct anx78xx *anx78xx, u8 *pbuf)
This function isn't very useful, integrate it with sp_check_edid_data.
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + if ((pbuf[0] == 0) && (pbuf[7] == 0) && (pbuf[1] == 0xff)
> + && (pbuf[2] == 0xff) && (pbuf[3] == 0xff)
> + && (pbuf[4] == 0xff) && (pbuf[5] == 0xff) && (pbuf[6] == 0xff))
Fix indentation, and check bytes in order...
> + dev_dbg(dev, "Good EDID header!\n");
> + else
> + dev_err(dev, "Bad EDID header!\n");
> +}
> +
> +static void sp_check_edid_data(struct anx78xx *anx78xx, u8 *pblock_buf)
Same remark, only called from one place, and does nothing on error, anyway...
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 i;
> +
> + sp_edid_header_result(anx78xx, pblock_buf);
> + for (i = 0; i <= ((pblock_buf[0x7e] > 1) ? 1 : pblock_buf[0x7e]); i++) {
> + if (!sp_edid_checksum_result(pblock_buf + i * 128))
> + dev_err(dev, "Block %x edid checksum error\n", (u16)i);
> + else
> + dev_dbg(dev, "Block %x edid checksum OK\n", (u16)i);
> + }
> +}
> +
> +static bool sp_tx_edid_read(struct anx78xx *anx78xx, u8 *pedid_blocks_buf)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 offset = 0;
> + u8 count, blocks_num;
> + u8 pblock_buf[16];
> + u8 i, j, c;
> +
> + sp.edid_break = 0;
> + sp_tx_edid_read_initial(anx78xx);
> + sp_write_reg(anx78xx, TX_P0, AUX_CTRL, 0x04);
> + sp_write_reg_or(anx78xx, TX_P0, AUX_CTRL2, 0x03);
> + sp_wait_aux_op_finish(anx78xx, &sp.edid_break);
> + sp_tx_addronly_set(anx78xx, 0);
> +
> + blocks_num = sp_tx_get_edid_block(anx78xx);
> +
> + count = 0;
> + do {
for loop please.
> + switch (count) {
> + case 0:
> + case 1:
> + for (i = 0; i < 8; i++) {
> + offset = (i + count * 8) * 16;
> + sp_edid_read(anx78xx, offset, pblock_buf);
> + if (sp.edid_break == 1)
> + break;
This is a good candidate for a goto label.
> + for (j = 0; j < 16; j++) {
> + pedid_blocks_buf[offset + j]
> + = pblock_buf[j];
Can you read directly into pedid_block_buf?
> + }
> + }
> + break;
> + case 2:
> + offset = 0x00;
> + for (j = 0; j < 8; j++) {
> + if (sp.edid_break == 1)
> + break;
> + sp_seg_edid_read(anx78xx, count / 2, offset);
> + offset = offset + 0x10;
> + }
> + break;
> + case 3:
> + offset = 0x80;
> + for (j = 0; j < 8; j++) {
> + if (sp.edid_break == 1)
> + break;
> + sp_seg_edid_read(anx78xx, count / 2, offset);
> + offset = offset + 0x10;
> + }
> + break;
Apart from the offset, those 2 cases look very similar...
> + default:
> + break;
> + }
> + count++;
> + if (sp.edid_break == 1)
> + break;
> + } while (blocks_num >= count);
> +
> + sp_tx_rst_aux(anx78xx);
> + if (sp.read_edid_flag == 0) {
> + sp_check_edid_data(anx78xx, pedid_blocks_buf);
> + sp.read_edid_flag = 1;
> + }
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02, 0x18, 1, &c);
> + if (c & 0x04) {
> + dev_dbg(dev, "check sum = %.2x\n", (u16)sp.edid_checksum);
> + c = sp.edid_checksum;
> + sp_tx_aux_dpcdwrite_bytes(anx78xx, 0x00, 0x02, 0x61, 1, &c);
> + sp.tx_test_edid = 1;
> + c = 0x04;
> + sp_tx_aux_dpcdwrite_bytes(anx78xx, 0x00, 0x02, 0x60, 1, &c);
> + dev_dbg(dev, "Test EDID done\n");
> +
> + }
> +
> + return 0;
Always returns 0...
> +}
> +
> +static bool sp_check_with_pre_edid(struct anx78xx *anx78xx, u8 *org_buf)
If you return a bool, true means ok, false means error. You do the opposite here.
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 i;
> + u8 temp_buf[16];
> + bool return_flag;
That's not really a flag. "ret" is a more common name.
> +
> + return_flag = 0;
> + sp.edid_break = 0;
> + sp_tx_edid_read_initial(anx78xx);
> + sp_write_reg(anx78xx, TX_P0, AUX_CTRL, 0x04);
> + sp_write_reg_or(anx78xx, TX_P0, AUX_CTRL2, 0x03);
> + sp_wait_aux_op_finish(anx78xx, &sp.edid_break);
> + sp_tx_addronly_set(anx78xx, 0);
> +
> + sp_edid_read(anx78xx, 0x70, temp_buf);
> +
> + if (sp.edid_break == 0) {
> +
> + for (i = 0; i < 16; i++) {
> + if (org_buf[0x70 + i] != temp_buf[i]) {
> + dev_dbg(dev, "%s\n",
> + "different checksum and blocks num\n");
> + return_flag = 1;
> + break;
> + }
> + }
> + } else
> + return_flag = 1;
> +
> + if (return_flag)
> + goto return_point;
You can do that earlier... Easiest might be to set ret = false as default value.
> +
> + sp_edid_read(anx78xx, 0x08, temp_buf);
> + if (sp.edid_break == 0) {
> + for (i = 0; i < 16; i++) {
> + if (org_buf[i + 8] != temp_buf[i]) {
> + dev_dbg(dev, "different edid information\n");
> + return_flag = 1;
> + break;
> + }
> + }
> + } else
> + return_flag = 1;
> +
> +return_point:
> + sp_tx_rst_aux(anx78xx);
> +
> + return return_flag;
> +}
> +
> +static void sp_edid_process(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 temp_value, temp_value1;
> + u8 i;
> +
> + dev_dbg(dev, "edid_process\n");
> +
> + if (sp.read_edid_flag == 1) {
> + if (sp_check_with_pre_edid(anx78xx, sp.edid_blocks))
> + sp.read_edid_flag = 0;
> + else
> + dev_dbg(dev, "Don`t need to read edid!\n");
"Don't need". And then I'm not sure that that means.
> + }
> +
> + if (sp.read_edid_flag == 0) {
> + sp_tx_edid_read(anx78xx, sp.edid_blocks);
> + if (sp.edid_break)
> + dev_err(dev, "ERR:EDID corruption!\n");
> + }
> +
> + /* Release the HPD after the OTP loaddown */
> + i = 10;
> + do {
> + if ((sp_i2c_read_byte(anx78xx, TX_P0, HDCP_KEY_STATUS) & 0x01))
Too many parentheses.
> + break;
> +
> + dev_dbg(dev, "waiting HDCP KEY loaddown\n");
> + usleep_range(1000, 2000);
> + } while (--i);
For loop.
> +
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_INT_MASK1_REG, 0xe2);
> + hdmi_rx_set_hpd(anx78xx, 1);
> + dev_dbg(dev, "hdmi_rx_set_hpd 1 !\n");
> +
> + hdmi_rx_set_termination(anx78xx, 1);
> +
> + sp_tx_get_rx_bw(anx78xx, &temp_value);
> + dev_dbg(dev, "RX BW %x\n", (u16)temp_value);
> +
> + temp_value1 = sp_parse_edid_to_get_bandwidth(anx78xx);
> + if (temp_value <= temp_value1)
> + temp_value1 = temp_value;
> +
> + dev_dbg(dev, "set link bw in edid %x\n", (u16)temp_value1);
> + sp.changed_bandwidth = temp_value1;
> + goto_next_system_state(anx78xx);
> +}
> +/******************End EDID process********************/
> +
> +/******************start Link training process********************/
> +static void sp_tx_lvttl_bit_mapping(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 c, colorspace;
> + u8 vid_bit;
> +
> + vid_bit = 0;
> + sp_read_reg(anx78xx, RX_P1, HDMI_RX_AVI_DATA00_REG, &colorspace);
> + colorspace &= 0x60;
> +
> + switch (((sp_i2c_read_byte(anx78xx, RX_P0, HDMI_RX_VIDEO_STATUS_REG1)
> + & COLOR_DEPTH) >> 4)) {
> + default:
> + case HDMI_LEGACY:
> + c = IN_BPC_8BIT;
> + vid_bit = 0;
> + break;
> + case HDMI_24BIT:
> + c = IN_BPC_8BIT;
> + if (colorspace == 0x20)
> + vid_bit = 5;
> + else
> + vid_bit = 1;
> + break;
> + case HDMI_30BIT:
> + c = IN_BPC_10BIT;
> + if (colorspace == 0x20)
> + vid_bit = 6;
> + else
> + vid_bit = 2;
> + break;
> + case HDMI_36BIT:
> + c = IN_BPC_12BIT;
> + if (colorspace == 0x20)
> + vid_bit = 6;
> + else
> + vid_bit = 3;
> + break;
> +
> + }
> + /*
> + * For down sample video (12bit, 10bit ---> 8bit),
> + * this register don`t change
doesn't
> + */
> + if (sp.down_sample_en == 0)
> + sp_write_reg_and_or(anx78xx, TX_P2,
> + SP_TX_VID_CTRL2_REG, 0x8c, colorspace >> 5 | c);
> +
> + /* Patch: for 10bit video must be set this value to 12bit by someone */
> + if (sp.down_sample_en == 1 && c == IN_BPC_10BIT)
> + vid_bit = 3;
> +
> + sp_write_reg_and_or(anx78xx, TX_P2,
> + BIT_CTRL_SPECIFIC, 0x00, ENABLE_BIT_CTRL | vid_bit << 1);
> +
> + if (sp.tx_test_edid) {
> + sp_write_reg_and(anx78xx, TX_P2, SP_TX_VID_CTRL2_REG, 0x8f);
> + dev_dbg(dev, "***color space is set to 18bit***\n");
> + }
> +
> + if (colorspace) {
> + sp_write_reg(anx78xx, TX_P0, SP_TX_VID_BLANK_SET1, 0x80);
> + sp_write_reg(anx78xx, TX_P0, SP_TX_VID_BLANK_SET2, 0x00);
> + sp_write_reg(anx78xx, TX_P0, SP_TX_VID_BLANK_SET3, 0x80);
> + } else {
> + sp_write_reg(anx78xx, TX_P0, SP_TX_VID_BLANK_SET1, 0x0);
> + sp_write_reg(anx78xx, TX_P0, SP_TX_VID_BLANK_SET2, 0x0);
> + sp_write_reg(anx78xx, TX_P0, SP_TX_VID_BLANK_SET3, 0x0);
> + }
> +}
> +
> +static ulong sp_tx_pclk_calc(struct anx78xx *anx78xx)
"ulong" is very uncommon in the kernel. Use unsigned long, or maybe
unsigned int is enough. Or maybe u32, u64 if that matters.
> +{
> + struct device *dev = &anx78xx->client->dev;
> + ulong str_plck;
> + u16 vid_counter;
> + u8 c;
> +
> + sp_read_reg(anx78xx, RX_P0, 0x8d, &c);
> + vid_counter = c;
> + vid_counter = vid_counter << 8;
c << 8
> + sp_read_reg(anx78xx, RX_P0, 0x8c, &c);
> + vid_counter |= c;
> + str_plck = ((ulong)vid_counter * XTAL_CLK_M10) >> 12;
> + dev_dbg(dev, "PCLK = %d.%d\n", (((u16)(str_plck))/10),
> + ((u16)str_plck - (((u16)str_plck/10)*10)));
> + return str_plck;
> +}
> +
> +static u8 sp_tx_bw_lc_sel(struct anx78xx *anx78xx, ulong pclk)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + ulong pixel_clk;
> + u8 c1;
> +
> + switch (((sp_i2c_read_byte(anx78xx, RX_P0, HDMI_RX_VIDEO_STATUS_REG1)
> + & COLOR_DEPTH) >> 4)) {
> + case HDMI_LEGACY:
> + case HDMI_24BIT:
> + default:
> + pixel_clk = pclk;
> + break;
> + case HDMI_30BIT:
> + pixel_clk = (pclk * 5) >> 2;
> + break;
> + case HDMI_36BIT:
> + pixel_clk = (pclk * 3) >> 1;
> + break;
> + }
> + dev_dbg(dev, "pixel_clk = %d.%d\n", (((u16)(pixel_clk))/10),
> + ((u16)pixel_clk - (((u16)pixel_clk/10)*10)));
> +
> + sp.down_sample_en = 0;
> + if (pixel_clk <= 530)
> + c1 = LINK_1P62G;
> + else if ((530 < pixel_clk) && (pixel_clk <= 890))
> + c1 = LINK_2P7G;
> + else if ((890 < pixel_clk) && (pixel_clk <= 1800))
> + c1 = LINK_5P4G;
> + else {
> + c1 = LINK_6P75G;
Indentation.
> + if (pixel_clk > 2240)
> + sp.down_sample_en = 1;
> + }
> +
> + if (sp_tx_get_link_bw(anx78xx) != c1) {
> + sp.changed_bandwidth = c1;
> + dev_dbg(dev, "%s! %.2x\n",
> + "different bandwidth between sink support and cur video",
No need to pass that string as parameter.
> + (u16)c1);
> + return 1;
> + }
> + return 0;
> +}
> +
> +static void sp_tx_spread_enable(struct anx78xx *anx78xx, u8 benable)
> +{
> + u8 c;
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_DOWN_SPREADING_CTRL1, &c);
> +
> + if (benable) {
> + c |= SP_TX_SSC_DWSPREAD;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_DOWN_SPREADING_CTRL1, c);
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x01,
> + DPCD_DOWNSPREAD_CTRL, 1, &c);
> + c |= SPREAD_AMPLITUDE;
> + sp_tx_aux_dpcdwrite_byte(anx78xx, 0x00, 0x01,
> + DPCD_DOWNSPREAD_CTRL, c);
> + } else {
> + c &= ~SP_TX_SSC_DISABLE;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_DOWN_SPREADING_CTRL1, c);
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x01,
> + DPCD_DOWNSPREAD_CTRL, 1, &c);
> + c &= ~SPREAD_AMPLITUDE;
> + sp_tx_aux_dpcdwrite_byte(anx78xx, 0x00, 0x01,
> + DPCD_DOWNSPREAD_CTRL, c);
> + }
> +}
> +
> +static void sp_tx_config_ssc(struct anx78xx *anx78xx,
> + enum sp_ssc_dep sscdep)
> +{
> + sp_write_reg(anx78xx, TX_P0, SP_TX_DOWN_SPREADING_CTRL1, 0x0);
> + sp_write_reg(anx78xx, TX_P0, SP_TX_DOWN_SPREADING_CTRL1, sscdep);
> + sp_tx_spread_enable(anx78xx, 1);
> +}
> +
> +static void sp_tx_enhancemode_set(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 c;
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x00, DPCD_MAX_LANE_COUNT,
> + 1, &c);
> + if (c & ENHANCED_FRAME_CAP) {
> + sp_write_reg_or(anx78xx, TX_P0, SP_TX_SYS_CTRL4_REG,
> + ENHANCED_MODE);
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x01,
> + DPCD_LANE_COUNT_SET, 1, &c);
> + c |= ENHANCED_FRAME_EN;
> + sp_tx_aux_dpcdwrite_byte(anx78xx, 0x00, 0x01,
> + DPCD_LANE_COUNT_SET, c);
> +
> + dev_dbg(dev, "Enhance mode enabled\n");
> + } else {
> + sp_write_reg_and(anx78xx, TX_P0, SP_TX_SYS_CTRL4_REG,
> + ~ENHANCED_MODE);
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x01,
> + DPCD_LANE_COUNT_SET, 1, &c);
> +
> + c &= ~ENHANCED_FRAME_EN;
> + sp_tx_aux_dpcdwrite_byte(anx78xx, 0x00, 0x01,
> + DPCD_LANE_COUNT_SET, c);
> +
> + dev_dbg(dev, "Enhance mode disabled\n");
> + }
> +}
> +
> +static u16 sp_tx_link_err_check(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u16 errl = 0, errh = 0;
> + u8 bytebuf[2];
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02, 0x10, 2, bytebuf);
> + usleep_range(5000, 10000);
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02, 0x10, 2, bytebuf);
> + errh = bytebuf[1];
> +
> + if (errh & 0x80) {
> + errl = bytebuf[0];
> + errh = (errh & 0x7f) << 8;
> + errl = errh + errl;
> + }
> +
> + dev_err(dev, " Err of Lane = %d\n", errl);
> + return errl;
> +}
> +
> +static void sp_lt_finish(struct anx78xx *anx78xx, u8 temp_value)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02, 0x02, 1, &temp_value);
> + if ((temp_value & 0x07) == 0x07) {
> + /*
> + * if there is link error,
> + * adjust pre-emphsis to check error again.
> + * If there is no error,keep the setting,
> + * otherwise use 400mv0db
> + */
> + if (!sp.tx_test_lt) {
> + if (sp_tx_link_err_check(anx78xx)) {
> + sp_read_reg(anx78xx, TX_P0,
> + SP_TX_LT_SET_REG, &temp_value);
> + if (!(temp_value & MAX_PRE_REACH)) {
> + sp_write_reg(anx78xx, TX_P0,
> + SP_TX_LT_SET_REG,
> + (temp_value + 0x08));
> + if (sp_tx_link_err_check(anx78xx))
> + sp_write_reg(anx78xx, TX_P0,
> + SP_TX_LT_SET_REG,
> + temp_value);
> + }
> + }
> +
> + sp_read_reg(anx78xx, TX_P0,
> + SP_TX_LINK_BW_SET_REG, &temp_value);
Use sp_tx_get_link_bw.
> + if (temp_value == sp.changed_bandwidth) {
> + dev_dbg(dev, "LT succeed, bw: %.2x",
> + (u16) temp_value);
> + dev_dbg(dev, "Lane0 Set: %.2x\n",
> + (u16) sp_i2c_read_byte(anx78xx, TX_P0,
> + SP_TX_LT_SET_REG));
> + sp.tx_lt_state = LT_INIT;
> + goto_next_system_state(anx78xx);
> + } else {
> + dev_dbg(dev, "cur:%.2x, per:%.2x\n",
> + (u16)temp_value,
> + (u16)sp.changed_bandwidth);
> + sp.tx_lt_state = LT_ERROR;
> + }
> + } else {
> + sp.tx_test_lt = 0;
> + sp.tx_lt_state = LT_INIT;
> + goto_next_system_state(anx78xx);
> + }
> + } else {
> + dev_dbg(dev, "LANE0 Status error: %.2x\n",
> + (u16)(temp_value & 0x07));
> + sp.tx_lt_state = LT_ERROR;
> + }
> +}
> +
> +static void sp_link_training(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 temp_value, return_value, c;
> +
> + return_value = 1;
> + dev_dbg(dev, "sp.tx_lt_state : %x\n",
> + (int)sp.tx_lt_state);
> + switch (sp.tx_lt_state) {
> + case LT_INIT:
> + sp_block_power_ctrl(anx78xx, SP_TX_PWR_VIDEO,
> + SP_POWER_ON);
> + sp_tx_video_mute(anx78xx, 1);
> + sp_tx_enable_video_input(anx78xx, 0);
> + sp.tx_lt_state++;
> + /* fallthrough */
> + case LT_WAIT_PLL_LOCK:
> + if (!sp_tx_get_pll_lock_status(anx78xx)) {
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PLL_CTRL_REG,
> + &temp_value);
> +
> + temp_value |= PLL_RST;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PLL_CTRL_REG,
> + temp_value);
> +
> + temp_value &= ~PLL_RST;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PLL_CTRL_REG,
> + temp_value);
> +
> + dev_dbg(dev, "PLL not lock!\n");
> + } else
> + sp.tx_lt_state = LT_CHECK_LINK_BW;
> + SP_BREAK(LT_WAIT_PLL_LOCK, sp.tx_lt_state);
> + /* fallthrough */
> + case LT_CHECK_LINK_BW:
> + sp_tx_get_rx_bw(anx78xx, &temp_value);
> + if (temp_value < sp.changed_bandwidth) {
> + dev_dbg(dev, "****Over bandwidth****\n");
> + sp.changed_bandwidth = temp_value;
> + } else
> + sp.tx_lt_state++;
> + /* fallthrough */
> + case LT_START:
> + if (sp.tx_test_lt) {
> + sp.changed_bandwidth = sp.tx_test_bw;
> + sp_write_reg_and(anx78xx, TX_P2, SP_TX_VID_CTRL2_REG,
> + 0x8f);
> + } else
> + sp_write_reg(anx78xx, TX_P0, SP_TX_LT_SET_REG, 0x00);
> +
> + sp_write_reg_and(anx78xx, TX_P0, SP_TX_ANALOG_PD_REG, ~CH0_PD);
> +
> + sp_tx_config_ssc(anx78xx, SSC_DEP_4000PPM);
> + sp_tx_set_link_bw(anx78xx, sp.changed_bandwidth);
> + sp_tx_enhancemode_set(anx78xx);
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x00, 0x00, 0x01, &c);
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x06, 0x00, 0x01,
> + &temp_value);
> + if (c >= 0x12)
> + temp_value &= 0xf8;
> + else
> + temp_value &= 0xfc;
> + temp_value |= 0x01;
> + sp_tx_aux_dpcdwrite_byte(anx78xx, 0x00, 0x06, 0x00, temp_value);
> +
> +
> + sp_write_reg(anx78xx, TX_P0, LT_CTRL, SP_TX_LT_EN);
> + sp.tx_lt_state = LT_WAITTING_FINISH;
> + /* fallthrough */
> + case LT_WAITTING_FINISH:
> + /* here : waiting interrupt to change training state. */
> + break;
> +
> + case LT_ERROR:
> + sp_write_reg_or(anx78xx, TX_P2, RST_CTRL2, SERDES_FIFO_RST);
> + msleep(20);
> + sp_write_reg_and(anx78xx, TX_P2, RST_CTRL2, (~SERDES_FIFO_RST));
> + dev_err(dev, "LT ERROR Status: SERDES FIFO reset.");
> + redo_cur_system_state(anx78xx);
> + sp.tx_lt_state = LT_INIT;
> + break;
> +
> + case LT_FINISH:
> + sp_lt_finish(anx78xx, temp_value);
> + break;
> + default:
> + break;
> + }
> +
> +}
> +/******************End Link training process********************/
> +
> +/******************Start Output video process********************/
> +static void sp_tx_set_colorspace(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 color_space;
> +
> + if (sp.down_sample_en) {
> + sp_read_reg(anx78xx, RX_P1, HDMI_RX_AVI_DATA00_REG,
> + &color_space);
> + color_space &= 0x60;
> + if (color_space == 0x20) {
> + dev_dbg(dev, "YCbCr4:2:2 ---> PASS THROUGH.\n");
> + sp_write_reg(anx78xx, TX_P2, SP_TX_VID_CTRL6_REG, 0x00);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_VID_CTRL5_REG, 0x00);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_VID_CTRL2_REG, 0x11);
> + } else if (color_space == 0x40) {
> + dev_dbg(dev, "YCbCr4:4:4 ---> YCbCr4:2:2\n");
> + sp_write_reg(anx78xx, TX_P2, SP_TX_VID_CTRL6_REG, 0x41);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_VID_CTRL5_REG, 0x00);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_VID_CTRL2_REG, 0x12);
> + } else if (color_space == 0x00) {
> + dev_dbg(dev, "RGB4:4:4 ---> YCbCr4:2:2\n");
> + sp_write_reg(anx78xx, TX_P2, SP_TX_VID_CTRL6_REG, 0x41);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_VID_CTRL5_REG, 0x83);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_VID_CTRL2_REG, 0x10);
> + }
> + } else {
> + sp_write_reg(anx78xx, TX_P2, SP_TX_VID_CTRL6_REG, 0x00);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_VID_CTRL5_REG, 0x00);
> + }
> +}
> +
> +static void sp_tx_avi_setup(struct anx78xx *anx78xx)
> +{
> + u8 c;
> + int i;
> +
> + for (i = 0; i < 13; i++) {
> + sp_read_reg(anx78xx, RX_P1, (HDMI_RX_AVI_DATA00_REG + i), &c);
> + sp.tx_packet_avi.avi_data[i] = c;
> + }
> +}
> +
> +static void sp_tx_load_packet(struct anx78xx *anx78xx,
> + enum packets_type type)
> +{
> + int i;
> + u8 c;
> +
> + switch (type) {
> + case AVI_PACKETS:
> + sp_write_reg(anx78xx, TX_P2, SP_TX_AVI_TYPE, 0x82);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_AVI_VER, 0x02);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_AVI_LEN, 0x0d);
> +
> + for (i = 0; i < 13; i++) {
> + sp_write_reg(anx78xx, TX_P2, SP_TX_AVI_DB0 + i,
> + sp.tx_packet_avi.avi_data[i]);
> + }
> +
> + break;
> +
> + case SPD_PACKETS:
> + sp_write_reg(anx78xx, TX_P2, SP_TX_SPD_TYPE, 0x83);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_SPD_VER, 0x01);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_SPD_LEN, 0x19);
> +
> + for (i = 0; i < 25; i++) {
> + sp_write_reg(anx78xx, TX_P2, SP_TX_SPD_DB0 + i,
> + sp.tx_packet_spd.spd_data[i]);
> + }
> +
> + break;
> +
> + case VSI_PACKETS:
> + sp_write_reg(anx78xx, TX_P2, SP_TX_MPEG_TYPE, 0x81);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_MPEG_VER, 0x01);
> + sp_read_reg(anx78xx, RX_P1, HDMI_RX_MPEG_LEN_REG, &c);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_MPEG_LEN, c);
> +
> + for (i = 0; i < 10; i++) {
> + sp_write_reg(anx78xx, TX_P2, SP_TX_MPEG_DB0 + i,
> + sp.tx_packet_mpeg.mpeg_data[i]);
> + }
> +
> + break;
> + case MPEG_PACKETS:
> + sp_write_reg(anx78xx, TX_P2, SP_TX_MPEG_TYPE, 0x85);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_MPEG_VER, 0x01);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_MPEG_LEN, 0x0d);
> +
> + for (i = 0; i < 10; i++) {
> + sp_write_reg(anx78xx, TX_P2, SP_TX_MPEG_DB0 + i,
> + sp.tx_packet_mpeg.mpeg_data[i]);
> + }
> +
> + break;
> + case AUDIF_PACKETS:
> + sp_write_reg(anx78xx, TX_P2, SP_TX_AUD_TYPE, 0x84);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_AUD_VER, 0x01);
> + sp_write_reg(anx78xx, TX_P2, SP_TX_AUD_LEN, 0x0a);
> + for (i = 0; i < 10; i++) {
> + sp_write_reg(anx78xx, TX_P2, SP_TX_AUD_DB0 + i,
> + sp.tx_audioinfoframe.pb_byte[i]);
> + }
> +
> + break;
> +
> + default:
> + break;
> + }
> +}
> +
> +static void sp_tx_config_packets(struct anx78xx *anx78xx,
> + enum packets_type type)
> +{
> + u8 c;
> +
> + switch (type) {
> + case AVI_PACKETS:
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c &= ~AVI_IF_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> + sp_tx_load_packet(anx78xx, AVI_PACKETS);
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c |= AVI_IF_UD;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c |= AVI_IF_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> + break;
> +
> + case SPD_PACKETS:
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c &= ~SPD_IF_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> + sp_tx_load_packet(anx78xx, SPD_PACKETS);
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c |= SPD_IF_UD;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c |= SPD_IF_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> + break;
> +
> + case VSI_PACKETS:
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c &= ~MPEG_IF_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> + sp_tx_load_packet(anx78xx, VSI_PACKETS);
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c |= MPEG_IF_UD;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c |= MPEG_IF_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> + break;
> + case MPEG_PACKETS:
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c &= ~MPEG_IF_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> +
> + sp_tx_load_packet(anx78xx, MPEG_PACKETS);
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c |= MPEG_IF_UD;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c |= MPEG_IF_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> + break;
> + case AUDIF_PACKETS:
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c &= ~AUD_IF_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> +
> + sp_tx_load_packet(anx78xx, AUDIF_PACKETS);
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c |= AUD_IF_UP;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, &c);
> + c |= AUD_IF_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_PKT_EN_REG, c);
> +
> + break;
> +
> + default:
> + break;
> + }
> +
> +}
> +
> +static void sp_config_video_output(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 temp_value;
> +
> + switch (sp.tx_vo_state) {
> + default:
> + case VO_WAIT_VIDEO_STABLE:
> + sp_read_reg(anx78xx, RX_P0, HDMI_RX_SYS_STATUS_REG,
> + &temp_value);
> + if ((temp_value & (TMDS_DE_DET | TMDS_CLOCK_DET)) == 0x03) {
> + sp_tx_bw_lc_sel(anx78xx, sp_tx_pclk_calc(anx78xx));
> + sp_tx_enable_video_input(anx78xx, 0);
> + sp_tx_avi_setup(anx78xx);
> + sp_tx_config_packets(anx78xx, AVI_PACKETS);
> + sp_tx_set_colorspace(anx78xx);
> + sp_tx_lvttl_bit_mapping(anx78xx);
> + if (sp_i2c_read_byte(anx78xx, RX_P0, RX_PACKET_REV_STA)
> + & VSI_RCVD)
> + sp_hdmi_rx_new_vsi_int(anx78xx);
> + sp_tx_enable_video_input(anx78xx, 1);
> + sp.tx_vo_state = VO_WAIT_TX_VIDEO_STABLE;
> + } else
> + dev_dbg(dev, "HDMI input video not stable!\n");
> + SP_BREAK(VO_WAIT_VIDEO_STABLE, sp.tx_vo_state);
> + /* fallthrough */
> + case VO_WAIT_TX_VIDEO_STABLE:
> + sp_read_reg(anx78xx, TX_P0, SP_TX_SYS_CTRL2_REG, &temp_value);
> + sp_write_reg(anx78xx, TX_P0, SP_TX_SYS_CTRL2_REG, temp_value);
> + sp_read_reg(anx78xx, TX_P0, SP_TX_SYS_CTRL2_REG, &temp_value);
> + if (temp_value & CHA_STA)
> + dev_dbg(dev, "Stream clock not stable!\n");
> + else {
> + sp_read_reg(anx78xx, TX_P0, SP_TX_SYS_CTRL3_REG,
> + &temp_value);
> + sp_write_reg(anx78xx, TX_P0, SP_TX_SYS_CTRL3_REG,
> + temp_value);
> + sp_read_reg(anx78xx, TX_P0, SP_TX_SYS_CTRL3_REG,
> + &temp_value);
> + if (!(temp_value & STRM_VALID))
> + dev_err(dev, "video stream not valid!\n");
> + else
> + sp.tx_vo_state = VO_CHECK_VIDEO_INFO;
> + }
> + SP_BREAK(VO_WAIT_TX_VIDEO_STABLE, sp.tx_vo_state);
> + /* fallthrough */
> + case VO_CHECK_VIDEO_INFO:
> + if (!sp_tx_bw_lc_sel(anx78xx, sp_tx_pclk_calc(anx78xx)))
> + sp.tx_vo_state++;
> + else
> + sp_tx_set_sys_state(anx78xx, STATE_LINK_TRAINING);
> + SP_BREAK(VO_CHECK_VIDEO_INFO, sp.tx_vo_state);
> + /* fallthrough */
> + case VO_FINISH:
> + sp_block_power_ctrl(anx78xx, SP_TX_PWR_AUDIO,
> + SP_POWER_DOWN);
> + hdmi_rx_mute_video(anx78xx, 0);
> + sp_tx_video_mute(anx78xx, 0);
> + sp_tx_show_information(anx78xx);
> + goto_next_system_state(anx78xx);
> + break;
> + }
> +}
> +/******************End Output video process********************/
> +
> +/******************Start HDCP process********************/
> +static inline void sp_tx_hdcp_encryption_disable(struct anx78xx *anx78xx)
> +{
> + sp_write_reg_and(anx78xx, TX_P0, TX_HDCP_CTRL0, ~ENC_EN);
> +}
> +
> +static inline void sp_tx_hdcp_encryption_enable(struct anx78xx *anx78xx)
> +{
> + sp_write_reg_or(anx78xx, TX_P0, TX_HDCP_CTRL0, ENC_EN);
> +}
> +
> +static void sp_tx_hw_hdcp_enable(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 c;
> +
> + sp_write_reg_and(anx78xx, TX_P0, TX_HDCP_CTRL0,
> + ~ENC_EN & ~HARD_AUTH_EN);
> + sp_write_reg_or(anx78xx, TX_P0, TX_HDCP_CTRL0,
> + HARD_AUTH_EN | BKSV_SRM_PASS | KSVLIST_VLD | ENC_EN);
> +
> + sp_read_reg(anx78xx, TX_P0, TX_HDCP_CTRL0, &c);
> + dev_dbg(dev, "TX_HDCP_CTRL0 = %.2x\n", (u16)c);
> + sp_write_reg(anx78xx, TX_P0, SP_TX_WAIT_R0_TIME, 0xb0);
> + sp_write_reg(anx78xx, TX_P0, SP_TX_WAIT_KSVR_TIME, 0xc8);
> +
> + dev_dbg(dev, "Hardware HDCP is enabled.\n");
> +}
> +
> +static void sp_hdcp_process(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + switch (sp.hcdp_state) {
> + case HDCP_CAPABLE_CHECK:
> + sp.ds_vid_stb_cntr = 0;
> + sp.hdcp_fail_count = 0;
> + if (is_anx_dongle(anx78xx))
> + sp.hcdp_state = HDCP_WAITTING_VID_STB;
> + else
> + sp.hcdp_state = HDCP_HW_ENABLE;
> + if (sp.block_en == 0) {
> + if (sp_hdcp_cap_check(anx78xx) == 0)
> + sp.hcdp_state = HDCP_NOT_SUPPORT;
> + }
> + /*
> + * Just for debug, pin: P2-2
> + * There is a switch to disable/enable HDCP.
> + */
> + sp.hcdp_state = HDCP_NOT_SUPPORT;
> + /*****************************************/
> + SP_BREAK(HDCP_CAPABLE_CHECK, sp.hcdp_state);
> + /* fallthrough */
> + case HDCP_WAITTING_VID_STB:
> + msleep(100);
> + sp.hcdp_state = HDCP_HW_ENABLE;
> + SP_BREAK(HDCP_WAITTING_VID_STB, sp.hcdp_state);
> + /* fallthrough */
> + case HDCP_HW_ENABLE:
> + sp_tx_video_mute(anx78xx, 1);
> + sp_tx_clean_hdcp_status(anx78xx);
> + sp_block_power_ctrl(anx78xx, SP_TX_PWR_HDCP,
> + SP_POWER_DOWN);
> + msleep(20);
> + sp_block_power_ctrl(anx78xx, SP_TX_PWR_HDCP, SP_POWER_ON);
> + sp_write_reg(anx78xx, TX_P2, SP_COMMON_INT_MASK2, 0x01);
> + msleep(50);
> + sp_tx_hw_hdcp_enable(anx78xx);
> + sp.hcdp_state = HDCP_WAITTING_FINISH;
> + /* fallthrough */
> + case HDCP_WAITTING_FINISH:
> + break;
> + case HDCP_FINISH:
> + sp_tx_hdcp_encryption_enable(anx78xx);
> + hdmi_rx_mute_video(anx78xx, 0);
> + sp_tx_video_mute(anx78xx, 0);
> + goto_next_system_state(anx78xx);
> + sp.hcdp_state = HDCP_CAPABLE_CHECK;
> + dev_dbg(dev, "@@@@@@@hdcp_auth_pass@@@@@@\n");
> + break;
> + case HDCP_FAILE:
> + if (sp.hdcp_fail_count > 5) {
> + sp_vbus_power_off(anx78xx);
> + reg_hardware_reset(anx78xx);
> + sp.hcdp_state = HDCP_CAPABLE_CHECK;
> + sp.hdcp_fail_count = 0;
> + dev_dbg(dev, "*********hdcp_auth_failed*********\n");
> + } else {
> + sp.hdcp_fail_count++;
> + sp.hcdp_state = HDCP_WAITTING_VID_STB;
> + }
> + break;
> + default:
> + case HDCP_NOT_SUPPORT:
> + dev_dbg(dev, "Sink is not capable HDCP\n");
> + sp_block_power_ctrl(anx78xx, SP_TX_PWR_HDCP,
> + SP_POWER_DOWN);
> + sp_tx_video_mute(anx78xx, 0);
> + goto_next_system_state(anx78xx);
> + sp.hcdp_state = HDCP_CAPABLE_CHECK;
> + break;
> + }
> +}
> +/******************End HDCP process********************/
> +
> +/******************Start Audio process********************/
> +static void sp_tx_audioinfoframe_setup(struct anx78xx *anx78xx)
> +{
> + int i;
> + u8 c;
> +
> + sp_read_reg(anx78xx, RX_P1, HDMI_RX_AUDIO_TYPE_REG, &c);
> + sp.tx_audioinfoframe.type = c;
> + sp_read_reg(anx78xx, RX_P1, HDMI_RX_AUDIO_VER_REG, &c);
> + sp.tx_audioinfoframe.version = c;
> + sp_read_reg(anx78xx, RX_P1, HDMI_RX_AUDIO_LEN_REG, &c);
> + sp.tx_audioinfoframe.length = c;
> +
> + for (i = 0; i < 11; i++) {
> + sp_read_reg(anx78xx, RX_P1, (HDMI_RX_AUDIO_DATA00_REG + i), &c);
> + sp.tx_audioinfoframe.pb_byte[i] = c;
> + }
> +}
> +
> +static void sp_tx_enable_audio_output(struct anx78xx *anx78xx, u8 benable)
> +{
> + u8 c;
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_AUD_CTRL, &c);
> + if (benable) {
> + if (c & AUD_EN) {
> + c &= ~AUD_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_AUD_CTRL, c);
> + }
> + sp_tx_audioinfoframe_setup(anx78xx);
> + sp_tx_config_packets(anx78xx, AUDIF_PACKETS);
> +
> + c |= AUD_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_AUD_CTRL, c);
> +
> + } else {
> + c &= ~AUD_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_AUD_CTRL, c);
> + sp_write_reg_and(anx78xx, TX_P0, SP_TX_PKT_EN_REG, ~AUD_IF_EN);
> + }
> +}
> +
> +static void sp_tx_config_audio(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 c;
> + int i;
> + ulong M_AUD, LS_Clk = 0;
> + ulong AUD_Freq = 0;
> +
> + dev_dbg(dev, "**Config audio **\n");
> + sp_block_power_ctrl(anx78xx, SP_TX_PWR_AUDIO, SP_POWER_ON);
> + sp_read_reg(anx78xx, RX_P0, 0xCA, &c);
> +
> + switch (c & 0x0f) {
> + case 0x00:
> + AUD_Freq = 44.1;
You are assigning a float to an int...
> + break;
> + case 0x02:
> + AUD_Freq = 48;
> + break;
> + case 0x03:
> + AUD_Freq = 32;
> + break;
> + case 0x08:
> + AUD_Freq = 88.2;
> + break;
> + case 0x0a:
> + AUD_Freq = 96;
> + break;
> + case 0x0c:
> + AUD_Freq = 176.4;
> + break;
> + case 0x0e:
> + AUD_Freq = 192;
> + break;
> + default:
> + break;
> + }
> +
> +
> + switch (sp_tx_get_link_bw(anx78xx)) {
> + case LINK_1P62G:
> + LS_Clk = 162000;
> + break;
> + case LINK_2P7G:
> + LS_Clk = 270000;
> + break;
> + case LINK_5P4G:
> + LS_Clk = 540000;
> + break;
> + case LINK_6P75G:
> + LS_Clk = 675000;
> + break;
> + default:
> + break;
> + }
> +
> + dev_dbg(dev, "AUD_Freq = %ld , LS_CLK = %ld\n", AUD_Freq, LS_Clk);
> +
> + M_AUD = ((512 * AUD_Freq) / LS_Clk) * 32768;
If you look at the numbers, M_AUD will always be = 0.
> + M_AUD = M_AUD + 0x05;
> + sp_write_reg(anx78xx, TX_P1, SP_TX_AUD_INTERFACE_CTRL4, (M_AUD & 0xff));
> + M_AUD = M_AUD >> 8;
> + sp_write_reg(anx78xx, TX_P1, SP_TX_AUD_INTERFACE_CTRL5, (M_AUD & 0xff));
> + sp_write_reg(anx78xx, TX_P1, SP_TX_AUD_INTERFACE_CTRL6, 0x00);
> +
> + sp_write_reg_and(anx78xx, TX_P1, SP_TX_AUD_INTERFACE_CTRL0,
> + (u8)~AUD_INTERFACE_DISABLE);
> +
> + sp_write_reg_or(anx78xx, TX_P1, SP_TX_AUD_INTERFACE_CTRL2,
> + M_AUD_ADJUST_ST);
> +
> + sp_read_reg(anx78xx, RX_P0, HDMI_STATUS, &c);
> + if (c & HDMI_AUD_LAYOUT)
> + sp_write_reg_or(anx78xx, TX_P2, SP_TX_AUD_CH_NUM_REG5,
> + CH_NUM_8 | AUD_LAYOUT);
> + else
> + sp_write_reg_and(anx78xx, TX_P2, SP_TX_AUD_CH_NUM_REG5,
> + (u8)(~CH_NUM_8) & (~AUD_LAYOUT));
> +
> + /* transfer audio chaneel status from HDMI Rx to Slinmport Tx */
> + for (i = 0; i < 5; i++) {
> + sp_read_reg(anx78xx, RX_P0, (HDMI_RX_AUD_IN_CH_STATUS1_REG + i),
> + &c);
> + sp_write_reg(anx78xx, TX_P2, (SP_TX_AUD_CH_STATUS_REG1 + i), c);
> + }
> +
> + /* enable audio */
> + sp_tx_enable_audio_output(anx78xx, 1);
> +}
> +
> +static void sp_config_audio_output(struct anx78xx *anx78xx)
> +{
> + static u8 count;
> +
> + switch (sp.tx_ao_state) {
> + default:
> + case AO_INIT:
> + case AO_CTS_RCV_INT:
> + case AO_AUDIO_RCV_INT:
> + if (!(sp_i2c_read_byte(anx78xx, RX_P0, HDMI_STATUS)
> + & HDMI_MODE)) {
> + sp.tx_ao_state = AO_INIT;
> + goto_next_system_state(anx78xx);
> + }
> + break;
> + case AO_RCV_INT_FINISH:
> + if (count++ > 2)
> + sp.tx_ao_state = AO_OUTPUT;
> + else
> + sp.tx_ao_state = AO_INIT;
> + SP_BREAK(AO_INIT, sp.tx_ao_state);
> + /* fallthrough */
> + case AO_OUTPUT:
> + count = 0;
> + sp.tx_ao_state = AO_INIT;
> + hdmi_rx_mute_audio(anx78xx, 0);
> + sp_tx_config_audio(anx78xx);
> + goto_next_system_state(anx78xx);
> + break;
> + }
> +}
> +/******************End Audio process********************/
> +
> +void sp_initialization(struct anx78xx *anx78xx)
> +{
> + /* Waitting Hot plug event! */
> + if (!(sp.common_int_status.common_int[3] & PLUG))
> + return;
> +
> + sp.read_edid_flag = 0;
> +
> + /* Power on all modules */
> + sp_write_reg(anx78xx, TX_P2, SP_POWERD_CTRL_REG, 0x00);
> + /* Driver Version */
> + sp_write_reg(anx78xx, TX_P1, FW_VER_REG, FW_VERSION);
> + hdmi_rx_initialization(anx78xx);
> + sp_tx_initialization(anx78xx);
> + msleep(200);
> + goto_next_system_state(anx78xx);
> +}
> +
> +static void sp_hdcp_external_ctrl_flag_monitor(struct anx78xx *anx78xx)
> +{
> + static u8 cur_flag;
> +
> + if (sp.block_en != cur_flag) {
> + cur_flag = sp.block_en;
> + system_state_change_with_case(anx78xx, STATE_HDCP_AUTH);
> + }
> +}
> +
> +static void sp_state_process(struct anx78xx *anx78xx)
> +{
> + switch (sp.tx_system_state) {
> + case STATE_WAITTING_CABLE_PLUG:
> + sp_waiting_cable_plug_process(anx78xx);
> + SP_BREAK(STATE_WAITTING_CABLE_PLUG, sp.tx_system_state);
> + /* fallthrough */
> + case STATE_SP_INITIALIZED:
> + sp_initialization(anx78xx);
> + SP_BREAK(STATE_SP_INITIALIZED, sp.tx_system_state);
> + /* fallthrough */
> + case STATE_SINK_CONNECTION:
> + sp_sink_connection(anx78xx);
> + SP_BREAK(STATE_SINK_CONNECTION, sp.tx_system_state);
> + /* fallthrough */
> + case STATE_PARSE_EDID:
> + sp_edid_process(anx78xx);
> + SP_BREAK(STATE_PARSE_EDID, sp.tx_system_state);
> + /* fallthrough */
> + case STATE_LINK_TRAINING:
> + sp_link_training(anx78xx);
> + SP_BREAK(STATE_LINK_TRAINING, sp.tx_system_state);
> + /* fallthrough */
> + case STATE_VIDEO_OUTPUT:
> + sp_config_video_output(anx78xx);
> + SP_BREAK(STATE_VIDEO_OUTPUT, sp.tx_system_state);
> + /* fallthrough */
> + case STATE_HDCP_AUTH:
> + sp_hdcp_process(anx78xx);
> + SP_BREAK(STATE_HDCP_AUTH, sp.tx_system_state);
> + /* fallthrough */
> + case STATE_AUDIO_OUTPUT:
> + sp_config_audio_output(anx78xx);
> + SP_BREAK(STATE_AUDIO_OUTPUT, sp.tx_system_state);
> + /* fallthrough */
> + case STATE_PLAY_BACK:
> + SP_BREAK(STATE_PLAY_BACK, sp.tx_system_state);
> + /* fallthrough */
> + default:
> + break;
> + }
> +}
> +
> +/******************Start INT process********************/
> +static void sp_tx_int_rec(struct anx78xx *anx78xx)
> +{
> + sp_read_reg(anx78xx, TX_P2, SP_COMMON_INT_STATUS1,
> + &sp.common_int_status.common_int[0]);
> + sp_write_reg(anx78xx, TX_P2, SP_COMMON_INT_STATUS1,
> + sp.common_int_status.common_int[0]);
> +
> + sp_read_reg(anx78xx, TX_P2, SP_COMMON_INT_STATUS1 + 1,
> + &sp.common_int_status.common_int[1]);
> + sp_write_reg(anx78xx, TX_P2, SP_COMMON_INT_STATUS1 + 1,
> + sp.common_int_status.common_int[1]);
> +
> + sp_read_reg(anx78xx, TX_P2, SP_COMMON_INT_STATUS1 + 2,
> + &sp.common_int_status.common_int[2]);
> + sp_write_reg(anx78xx, TX_P2, SP_COMMON_INT_STATUS1 + 2,
> + sp.common_int_status.common_int[2]);
> +
> + sp_read_reg(anx78xx, TX_P2, SP_COMMON_INT_STATUS1 + 3,
> + &sp.common_int_status.common_int[3]);
> + sp_write_reg(anx78xx, TX_P2, SP_COMMON_INT_STATUS1 + 3,
> + sp.common_int_status.common_int[3]);
> +
> + sp_read_reg(anx78xx, TX_P2, SP_COMMON_INT_STATUS1 + 6,
> + &sp.common_int_status.common_int[4]);
> + sp_write_reg(anx78xx, TX_P2, SP_COMMON_INT_STATUS1 + 6,
> + sp.common_int_status.common_int[4]);
> +}
> +
> +static void sp_hdmi_rx_int_rec(struct anx78xx *anx78xx)
> +{
> + sp_read_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS1_REG,
> + &sp.hdmi_rx_int_status.hdmi_rx_int[0]);
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS1_REG,
> + sp.hdmi_rx_int_status.hdmi_rx_int[0]);
> + sp_read_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS2_REG,
> + &sp.hdmi_rx_int_status.hdmi_rx_int[1]);
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS2_REG,
> + sp.hdmi_rx_int_status.hdmi_rx_int[1]);
> + sp_read_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS3_REG,
> + &sp.hdmi_rx_int_status.hdmi_rx_int[2]);
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS3_REG,
> + sp.hdmi_rx_int_status.hdmi_rx_int[2]);
> + sp_read_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS4_REG,
> + &sp.hdmi_rx_int_status.hdmi_rx_int[3]);
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS4_REG,
> + sp.hdmi_rx_int_status.hdmi_rx_int[3]);
> + sp_read_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS5_REG,
> + &sp.hdmi_rx_int_status.hdmi_rx_int[4]);
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS5_REG,
> + sp.hdmi_rx_int_status.hdmi_rx_int[4]);
> + sp_read_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS6_REG,
> + &sp.hdmi_rx_int_status.hdmi_rx_int[5]);
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS6_REG,
> + sp.hdmi_rx_int_status.hdmi_rx_int[5]);
> + sp_read_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS7_REG,
> + &sp.hdmi_rx_int_status.hdmi_rx_int[6]);
> + sp_write_reg(anx78xx, RX_P0, HDMI_RX_INT_STATUS7_REG,
> + sp.hdmi_rx_int_status.hdmi_rx_int[6]);
> +}
> +
> +static void sp_int_rec(struct anx78xx *anx78xx)
> +{
> + sp_tx_int_rec(anx78xx);
> + sp_hdmi_rx_int_rec(anx78xx);
> +}
> +/******************End INT process********************/
> +
> +/******************Start task process********************/
> +static void sp_tx_pll_changed_int_handler(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + if (sp.tx_system_state >= STATE_LINK_TRAINING) {
> + if (!sp_tx_get_pll_lock_status(anx78xx)) {
> + dev_dbg(dev, "PLL:PLL not lock!\n");
> + sp_tx_set_sys_state(anx78xx, STATE_LINK_TRAINING);
> + }
> + }
> +}
> +
> +static void sp_tx_hdcp_link_chk_fail_handler(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + system_state_change_with_case(anx78xx, STATE_HDCP_AUTH);
> +
> + dev_dbg(dev, "hdcp_link_chk_fail:HDCP Sync lost!\n");
> +}
> +
> +static void sp_tx_phy_auto_test(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 b_sw;
> + u8 c1;
> + u8 bytebuf[16];
> + u8 link_bw;
> +
> + /* DPCD 0x219 TEST_LINK_RATE */
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x0, 0x02, 0x19, 1, bytebuf);
> + dev_dbg(dev, "DPCD:0x00219 = %.2x\n", (u16)bytebuf[0]);
> + switch (bytebuf[0]) {
> + case 0x06:
> + case 0x0A:
> + case 0x14:
> + case 0x19:
> + sp_tx_set_link_bw(anx78xx, bytebuf[0]);
> + sp.tx_test_bw = bytebuf[0];
> + break;
> + default:
> + sp_tx_set_link_bw(anx78xx, 0x19);
> + sp.tx_test_bw = 0x19;
> + break;
> + }
> +
> +
> + /* DPCD 0x248 PHY_TEST_PATTERN */
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x0, 0x02, 0x48, 1, bytebuf);
> + dev_dbg(dev, "DPCD:0x00248 = %.2x\n", (u16)bytebuf[0]);
> + switch (bytebuf[0]) {
> + case 0:
> + break;
> + case 1:
> + sp_write_reg(anx78xx, TX_P0, SP_TX_TRAINING_PTN_SET_REG, 0x04);
> + break;
> + case 2:
> + sp_write_reg(anx78xx, TX_P0, SP_TX_TRAINING_PTN_SET_REG, 0x08);
> + break;
> + case 3:
> + sp_write_reg(anx78xx, TX_P0, SP_TX_TRAINING_PTN_SET_REG, 0x0c);
> + break;
> + case 4:
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02, 0x50, 0xa,
> + bytebuf);
> + sp_write_reg(anx78xx, TX_P1, 0x80, bytebuf[0]);
> + sp_write_reg(anx78xx, TX_P1, 0x81, bytebuf[1]);
> + sp_write_reg(anx78xx, TX_P1, 0x82, bytebuf[2]);
> + sp_write_reg(anx78xx, TX_P1, 0x83, bytebuf[3]);
> + sp_write_reg(anx78xx, TX_P1, 0x84, bytebuf[4]);
> + sp_write_reg(anx78xx, TX_P1, 0x85, bytebuf[5]);
> + sp_write_reg(anx78xx, TX_P1, 0x86, bytebuf[6]);
> + sp_write_reg(anx78xx, TX_P1, 0x87, bytebuf[7]);
> + sp_write_reg(anx78xx, TX_P1, 0x88, bytebuf[8]);
> + sp_write_reg(anx78xx, TX_P1, 0x89, bytebuf[9]);
> + sp_write_reg(anx78xx, TX_P0, SP_TX_TRAINING_PTN_SET_REG, 0x30);
> + break;
> + case 5:
> + sp_write_reg(anx78xx, TX_P0, 0xA9, 0x00);
> + sp_write_reg(anx78xx, TX_P0, 0xAA, 0x01);
> + sp_write_reg(anx78xx, TX_P0, SP_TX_TRAINING_PTN_SET_REG, 0x14);
> + break;
> + }
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x00, 0x03, 1, bytebuf);
> + dev_dbg(dev, "DPCD:0x00003 = %.2x\n", (u16)bytebuf[0]);
> + switch (bytebuf[0] & 0x01) {
> + case 0:
> + sp_tx_spread_enable(anx78xx, 0);
> + break;
> + case 1:
> + sp_read_reg(anx78xx, TX_P0, SP_TX_LINK_BW_SET_REG, &c1);
Use sp_tx_get_link_bw.
> + switch (c1) {
> + case 0x06:
> + link_bw = 0x06;
> + break;
> + case 0x0a:
> + link_bw = 0x0a;
> + break;
> + case 0x14:
> + link_bw = 0x14;
> + break;
> + case 0x19:
> + link_bw = 0x19;
> + break;
Merge these cases together, then use link_bw = c1;
> + default:
> + link_bw = 0x00;
> + break;
> + }
> + sp_tx_config_ssc(anx78xx, SSC_DEP_4000PPM);
> + break;
> + }
> +
> + /* get swing and emphasis adjust request */
> + sp_read_reg(anx78xx, TX_P0, 0xA3, &b_sw);
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02, 0x06, 1, bytebuf);
> + dev_dbg(dev, "DPCD:0x00206 = %.2x\n", (u16)bytebuf[0]);
> + c1 = bytebuf[0] & 0x0f;
> + switch (c1) {
> + case 0x00:
> + sp_write_reg(anx78xx, TX_P0, 0xA3, (b_sw & ~0x1b) | 0x00);
> + break;
> + case 0x01:
> + sp_write_reg(anx78xx, TX_P0, 0xA3, (b_sw & ~0x1b) | 0x01);
> + break;
> + case 0x02:
> + sp_write_reg(anx78xx, TX_P0, 0xA3, (b_sw & ~0x1b) | 0x02);
> + break;
> + case 0x03:
> + sp_write_reg(anx78xx, TX_P0, 0xA3, (b_sw & ~0x1b) | 0x03);
> + break;
> + case 0x04:
> + sp_write_reg(anx78xx, TX_P0, 0xA3, (b_sw & ~0x1b) | 0x08);
> + break;
> + case 0x05:
> + sp_write_reg(anx78xx, TX_P0, 0xA3, (b_sw & ~0x1b) | 0x09);
> + break;
> + case 0x06:
> + sp_write_reg(anx78xx, TX_P0, 0xA3, (b_sw & ~0x1b) | 0x0a);
> + break;
> + case 0x08:
> + sp_write_reg(anx78xx, TX_P0, 0xA3, (b_sw & ~0x1b) | 0x10);
> + break;
> + case 0x09:
> + sp_write_reg(anx78xx, TX_P0, 0xA3, (b_sw & ~0x1b) | 0x11);
> + break;
> + case 0x0c:
> + sp_write_reg(anx78xx, TX_P0, 0xA3, (b_sw & ~0x1b) | 0x18);
> + break;
> + default:
> + break;
> + }
> +}
> +
> +static void sp_hpd_irq_process(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 c, c1;
> + u8 test_vector;
> + u8 data_buf[6];
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02, 0x00, 6, data_buf);
> + dev_dbg(dev, "+++++++++++++Get HPD IRQ %x\n", (int)data_buf[1]);
> +
> + if (data_buf[1] != 0)
> + sp_tx_aux_dpcdwrite_bytes(anx78xx, 0x00, 0x02,
> + DPCD_SERVICE_IRQ_VECTOR, 1, &(data_buf[1]));
> +
> + /* HDCP IRQ */
> + if (data_buf[1] & CP_IRQ) {
> + if (sp.hcdp_state > HDCP_WAITTING_FINISH
> + || sp.tx_system_state > STATE_HDCP_AUTH) {
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x06, 0x80, 0x29, 1,
> + &c1);
> + if (c1 & 0x04) {
> + system_state_change_with_case(anx78xx,
> + STATE_HDCP_AUTH);
> + dev_dbg(dev, "IRQ:_______HDCP Sync lost!\n");
> + }
> + }
> + }
> +
> + /* AUTOMATED TEST IRQ */
> + if (data_buf[1] & TEST_IRQ) {
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02, 0x18, 1,
> + &test_vector);
> +
> + if (test_vector & 0x01) {
> + sp.tx_test_lt = 1;
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02, 0x19, 1,
> + &c);
> + switch (c) {
> + case 0x06:
> + case 0x0A:
> + case 0x14:
> + case 0x19:
> + sp_tx_set_link_bw(anx78xx, c);
> + sp.tx_test_bw = c;
> + break;
> + default:
> + sp_tx_set_link_bw(anx78xx, 0x19);
> + sp.tx_test_bw = 0x19;
> + break;
> + }
> +
> + dev_dbg(dev, " test_bw = %.2x\n", (u16)sp.tx_test_bw);
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02, 0x60, 1,
> + &c);
> + c = c | TEST_ACK;
> + sp_tx_aux_dpcdwrite_bytes(anx78xx, 0x00, 0x02, 0x60, 1,
> + &c);
> +
> + dev_dbg(dev, "Set TEST_ACK!\n");
> + if (sp.tx_system_state >= STATE_LINK_TRAINING) {
> + sp.tx_lt_state = LT_INIT;
> + sp_tx_set_sys_state(anx78xx,
> + STATE_LINK_TRAINING);
> + }
> + dev_dbg(dev, "IRQ:test-LT request!\n");
> + }
> +
> + if (test_vector & 0x02) {
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02, 0x60, 1,
> + &c);
> + c = c | TEST_ACK;
> + sp_tx_aux_dpcdwrite_bytes(anx78xx, 0x00, 0x02, 0x60, 1,
> + &c);
> + }
> + if (test_vector & 0x04) {
> + if (sp.tx_system_state > STATE_PARSE_EDID)
> + sp_tx_set_sys_state(anx78xx, STATE_PARSE_EDID);
> + sp.tx_test_edid = 1;
> + dev_dbg(dev, "Test EDID Requested!\n");
> + }
> +
> + if (test_vector & 0x08) {
> + sp.tx_test_lt = 1;
> +
> + sp_tx_phy_auto_test(anx78xx);
> +
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x02, 0x60, 1,
> + &c);
> + c = c | 0x01;
> + sp_tx_aux_dpcdwrite_bytes(anx78xx, 0x00, 0x02, 0x60, 1,
> + &c);
> + }
> + }
> +
> + if (sp.tx_system_state > STATE_LINK_TRAINING) {
> + if (!(data_buf[4] & 0x01)
> + || ((data_buf[2] & (0x01 | 0x04)) != 0x05)) {
> + sp_tx_set_sys_state(anx78xx, STATE_LINK_TRAINING);
> + dev_dbg(dev, "INT:re-LT request!\n");
> + return;
> + }
> +
> + dev_dbg(dev, "Lane align %x\n", (u16)data_buf[4]);
> + dev_dbg(dev, "Lane clock recovery %x\n", (u16)data_buf[2]);
> + }
> +}
> +
> +static void sp_tx_vsi_setup(struct anx78xx *anx78xx)
> +{
> + u8 c;
> + int i;
> +
> + for (i = 0; i < 10; i++) {
> + sp_read_reg(anx78xx, RX_P1, (HDMI_RX_MPEG_DATA00_REG + i), &c);
> + sp.tx_packet_mpeg.mpeg_data[i] = c;
> + }
> +}
> +
> +static void sp_tx_mpeg_setup(struct anx78xx *anx78xx)
> +{
> + u8 c;
> + int i;
> +
> + for (i = 0; i < 10; i++) {
> + sp_read_reg(anx78xx, RX_P1, (HDMI_RX_MPEG_DATA00_REG + i), &c);
> + sp.tx_packet_mpeg.mpeg_data[i] = c;
> + }
> +}
> +
> +static void sp_tx_auth_done_int_handler(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 bytebuf[2];
> +
> + if (sp.hcdp_state > HDCP_HW_ENABLE
> + && sp.tx_system_state == STATE_HDCP_AUTH) {
> + sp_read_reg(anx78xx, TX_P0, SP_TX_HDCP_STATUS, bytebuf);
> + if (bytebuf[0] & SP_TX_HDCP_AUTH_PASS) {
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x06, 0x80, 0x2A, 2,
> + bytebuf);
> + if ((bytebuf[1] & 0x08) || (bytebuf[0] & 0x80)) {
> + dev_dbg(dev, "max cascade/devs exceeded!\n");
> + sp_tx_hdcp_encryption_disable(anx78xx);
> + } else
> + dev_dbg(dev, "%s\n",
> + "Authentication pass in Auth_Done");
> +
> + sp.hcdp_state = HDCP_FINISH;
> + } else {
> + dev_err(dev, "Authentication failed in AUTH_done\n");
> + sp_tx_video_mute(anx78xx, 1);
> + sp_tx_clean_hdcp_status(anx78xx);
> + sp.hcdp_state = HDCP_FAILE;
> + }
> + }
> +
> + dev_dbg(dev, "sp_tx_auth_done_int_handler\n");
> +}
> +
> +static void sp_tx_lt_done_int_handler(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 c;
> +
> + if (sp.tx_lt_state == LT_WAITTING_FINISH
> + && sp.tx_system_state == STATE_LINK_TRAINING) {
> + sp_read_reg(anx78xx, TX_P0, LT_CTRL, &c);
> + if (c & 0x70) {
> + c = (c & 0x70) >> 4;
> + dev_dbg(dev, "LT failed in interrupt, ERR = %.2x\n",
> + (u16) c);
> + sp.tx_lt_state = LT_ERROR;
> + } else {
> + dev_dbg(dev, "lt_done: LT Finish\n");
> + sp.tx_lt_state = LT_FINISH;
> + }
> + }
> +
> +}
> +
> +static void sp_hdmi_rx_clk_det_int(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + dev_dbg(dev, "*HDMI_RX Interrupt: Pixel Clock Change.\n");
> + if (sp.tx_system_state > STATE_VIDEO_OUTPUT) {
> + sp_tx_video_mute(anx78xx, 1);
> + sp_tx_enable_audio_output(anx78xx, 0);
> + sp_tx_set_sys_state(anx78xx, STATE_VIDEO_OUTPUT);
> + }
> +}
> +
> +static void sp_hdmi_rx_sync_det_int(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + dev_dbg(dev, "*HDMI_RX Interrupt: Sync Detect.\n");
> +}
> +
> +static void sp_hdmi_rx_hdmi_dvi_int(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 c;
> +
> + dev_dbg(dev, "sp_hdmi_rx_hdmi_dvi_int.\n");
> + sp_read_reg(anx78xx, RX_P0, HDMI_STATUS, &c);
> + sp.hdmi_dvi_status = 1;
> + if ((c & BIT(0)) != (sp.hdmi_dvi_status & BIT(0))) {
> + dev_dbg(dev, "hdmi_dvi_int: Is HDMI MODE: %x.\n",
> + (u16)(c & HDMI_MODE));
> + sp.hdmi_dvi_status = (c & BIT(0));
> + hdmi_rx_mute_audio(anx78xx, 1);
> + system_state_change_with_case(anx78xx, STATE_LINK_TRAINING);
> + }
> +}
> +
> +static void sp_hdmi_rx_new_avi_int(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + dev_dbg(dev, "*HDMI_RX Interrupt: New AVI Packet.\n");
> + sp_tx_lvttl_bit_mapping(anx78xx);
> + sp_tx_set_colorspace(anx78xx);
> + sp_tx_avi_setup(anx78xx);
> + sp_tx_config_packets(anx78xx, AVI_PACKETS);
> +}
> +
> +static void sp_hdmi_rx_new_vsi_int(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 hdmi_video_format, v3d_structure;
> +
> + dev_dbg(dev, "*HDMI_RX Interrupt: NEW VSI packet.\n");
> +
> + sp_write_reg_and(anx78xx, TX_P0, SP_TX_3D_VSC_CTRL, ~INFO_FRAME_VSC_EN);
> + /* VSI package header */
> + if ((sp_i2c_read_byte(anx78xx, RX_P1, HDMI_RX_MPEG_TYPE_REG) != 0x81)
> + || (sp_i2c_read_byte(anx78xx, RX_P1, HDMI_RX_MPEG_VER_REG)
> + != 0x01))
> + return;
> +
> + dev_dbg(dev, "Setup VSI package!\n");
> +
> + sp_tx_vsi_setup(anx78xx);
> + sp_tx_config_packets(anx78xx, VSI_PACKETS);
> +
> + sp_read_reg(anx78xx, RX_P1, HDMI_RX_MPEG_DATA03_REG,
> + &hdmi_video_format);
> +
> + if ((hdmi_video_format & 0xe0) == 0x40) {
> + dev_dbg(dev, "3D VSI packet detected. Config VSC packet\n");
> +
> + sp_read_reg(anx78xx, RX_P1, HDMI_RX_MPEG_DATA05_REG,
> + &v3d_structure);
> +
> + switch (v3d_structure&0xf0) {
> + case 0x00:
> + v3d_structure = 0x02;
> + break;
> + case 0x20:
> + v3d_structure = 0x03;
> + break;
> + case 0x30:
> + v3d_structure = 0x04;
> + break;
> + default:
> + v3d_structure = 0x00;
> + dev_dbg(dev, "3D structure is not supported\n");
> + break;
> + }
> + sp_write_reg(anx78xx, TX_P0, SP_TX_VSC_DB1, v3d_structure);
> + }
> + sp_write_reg_or(anx78xx, TX_P0, SP_TX_3D_VSC_CTRL, INFO_FRAME_VSC_EN);
> + sp_write_reg_and(anx78xx, TX_P0, SP_TX_PKT_EN_REG, ~SPD_IF_EN);
> + sp_write_reg_or(anx78xx, TX_P0, SP_TX_PKT_EN_REG, SPD_IF_UD);
> + sp_write_reg_or(anx78xx, TX_P0, SP_TX_PKT_EN_REG, SPD_IF_EN);
> +}
> +
> +static void sp_hdmi_rx_no_vsi_int(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 c;
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_3D_VSC_CTRL, &c);
> + if (c & INFO_FRAME_VSC_EN) {
> + dev_dbg(dev, "No new VSI is received, disable VSC packet\n");
> + c &= ~INFO_FRAME_VSC_EN;
> + sp_write_reg(anx78xx, TX_P0, SP_TX_3D_VSC_CTRL, c);
> + sp_tx_mpeg_setup(anx78xx);
> + sp_tx_config_packets(anx78xx, MPEG_PACKETS);
> + }
> +}
> +
> +static void sp_hdmi_rx_restart_audio_chk(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + dev_dbg(dev, "WAIT_AUDIO: sp_hdmi_rx_restart_audio_chk.\n");
> + system_state_change_with_case(anx78xx, STATE_AUDIO_OUTPUT);
> +}
> +
> +static void sp_hdmi_rx_cts_rcv_int(struct anx78xx *anx78xx)
> +{
> + if (sp.tx_ao_state == AO_INIT)
> + sp.tx_ao_state = AO_CTS_RCV_INT;
> + else if (sp.tx_ao_state == AO_AUDIO_RCV_INT)
> + sp.tx_ao_state = AO_RCV_INT_FINISH;
> +}
> +
> +static void sp_hdmi_rx_audio_rcv_int(struct anx78xx *anx78xx)
> +{
> + if (sp.tx_ao_state == AO_INIT)
> + sp.tx_ao_state = AO_AUDIO_RCV_INT;
> + else if (sp.tx_ao_state == AO_CTS_RCV_INT)
> + sp.tx_ao_state = AO_RCV_INT_FINISH;
> +}
> +
> +static void sp_hdmi_rx_audio_samplechg_int(struct anx78xx *anx78xx)
> +{
> + u16 i;
> + u8 c;
> + /* transfer audio chaneel status from HDMI Rx to Slinmport Tx */
> + for (i = 0; i < 5; i++) {
> + sp_read_reg(anx78xx, RX_P0, (HDMI_RX_AUD_IN_CH_STATUS1_REG + i),
> + &c);
> + sp_write_reg(anx78xx, TX_P2, (SP_TX_AUD_CH_STATUS_REG1 + i), c);
> + }
> +}
> +
> +static void sp_hdmi_rx_hdcp_error_int(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + static u8 count;
> +
> + dev_dbg(dev, "*HDMI_RX Interrupt: hdcp error.\n");
> + if (count >= 40) {
> + count = 0;
> + dev_dbg(dev, "Lots of hdcp error occurred ...\n");
> + hdmi_rx_mute_audio(anx78xx, 1);
> + hdmi_rx_mute_video(anx78xx, 1);
> + hdmi_rx_set_hpd(anx78xx, 0);
> + usleep_range(10000, 11000);
> + hdmi_rx_set_hpd(anx78xx, 1);
> + } else
> + count++;
> +}
> +
> +static void sp_hdmi_rx_new_gcp_int(struct anx78xx *anx78xx)
> +{
> + u8 c;
> +
> + sp_read_reg(anx78xx, RX_P1, HDMI_RX_GENERAL_CTRL, &c);
> + if (c & SET_AVMUTE) {
> + hdmi_rx_mute_video(anx78xx, 1);
> + hdmi_rx_mute_audio(anx78xx, 1);
> + } else if (c & CLEAR_AVMUTE) {
> + hdmi_rx_mute_video(anx78xx, 0);
> + hdmi_rx_mute_audio(anx78xx, 0);
> + }
> +}
> +
> +static void sp_tx_hpd_int_handler(struct anx78xx *anx78xx, u8 hpd_source)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + dev_dbg(dev, "sp_tx_hpd_int_handler\n");
> +
> + switch (hpd_source) {
> + case HPD_LOST:
> + hdmi_rx_set_hpd(anx78xx, 0);
> + sp_tx_set_sys_state(anx78xx, STATE_WAITTING_CABLE_PLUG);
> + break;
> + case HPD_CHANGE:
> + dev_dbg(dev, "HPD:____________HPD changed!\n");
> + usleep_range(2000, 4000);
> + if (sp.common_int_status.common_int[3] & HPD_IRQ)
> + sp_hpd_irq_process(anx78xx);
> +
> + if (sp_i2c_read_byte(anx78xx, TX_P0,
> + SP_TX_SYS_CTRL3_REG) & HPD_STATUS) {
> + if (sp.common_int_status.common_int[3] & HPD_IRQ)
> + sp_hpd_irq_process(anx78xx);
> + } else {
> + if (sp_i2c_read_byte(anx78xx, TX_P0,
> + SP_TX_SYS_CTRL3_REG)
> + & HPD_STATUS) {
> + hdmi_rx_set_hpd(anx78xx, 0);
> + sp_tx_set_sys_state(anx78xx,
> + STATE_WAITTING_CABLE_PLUG);
> + }
> + }
> + break;
> + case PLUG:
> + dev_dbg(dev, "HPD:____________HPD changed!\n");
> + if (sp.tx_system_state < STATE_SP_INITIALIZED)
> + sp_tx_set_sys_state(anx78xx, STATE_SP_INITIALIZED);
> + break;
> + default:
> + break;
> + }
> +}
> +
> +static void sp_system_isr_handler(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + if (sp.common_int_status.common_int[3] & HPD_CHANGE)
> + sp_tx_hpd_int_handler(anx78xx, HPD_CHANGE);
> + if (sp.common_int_status.common_int[3] & HPD_LOST)
> + sp_tx_hpd_int_handler(anx78xx, HPD_LOST);
> + if (sp.common_int_status.common_int[3] & HPD_IRQ)
> + dev_dbg(dev, "++++++++++++++++========HDCP_IRQ interrupt\n");
> + if (sp.common_int_status.common_int[0] & PLL_LOCK_CHG)
> + sp_tx_pll_changed_int_handler(anx78xx);
> +
> + if (sp.common_int_status.common_int[1] & HDCP_AUTH_DONE)
> + sp_tx_auth_done_int_handler(anx78xx);
> +
> + if (sp.common_int_status.common_int[2] & HDCP_LINK_CHECK_FAIL)
> + sp_tx_hdcp_link_chk_fail_handler(anx78xx);
> +
> + if (sp.common_int_status.common_int[4] & TRAINING_Finish)
> + sp_tx_lt_done_int_handler(anx78xx);
> +
> + if (sp.tx_system_state > STATE_SINK_CONNECTION) {
> + if (sp.hdmi_rx_int_status.hdmi_rx_int[5] & NEW_AVI)
> + sp_hdmi_rx_new_avi_int(anx78xx);
> + }
> +
> + if (sp.tx_system_state > STATE_VIDEO_OUTPUT) {
> + if (sp.hdmi_rx_int_status.hdmi_rx_int[6] & NEW_VS) {
> + sp.hdmi_rx_int_status.hdmi_rx_int[6] &= ~NO_VSI;
> + sp_hdmi_rx_new_vsi_int(anx78xx);
> + }
> + if (sp.hdmi_rx_int_status.hdmi_rx_int[6] & NO_VSI)
> + sp_hdmi_rx_no_vsi_int(anx78xx);
> + }
> +
> + if (sp.tx_system_state >= STATE_VIDEO_OUTPUT) {
> + if (sp.hdmi_rx_int_status.hdmi_rx_int[0] & CKDT_CHANGE)
> + sp_hdmi_rx_clk_det_int(anx78xx);
> +
> + if (sp.hdmi_rx_int_status.hdmi_rx_int[0] & SCDT_CHANGE)
> + sp_hdmi_rx_sync_det_int(anx78xx);
> +
> + if (sp.hdmi_rx_int_status.hdmi_rx_int[0] & HDMI_DVI)
> + sp_hdmi_rx_hdmi_dvi_int(anx78xx);
> +
> + if ((sp.hdmi_rx_int_status.hdmi_rx_int[5] & NEW_AUD)
> + || (sp.hdmi_rx_int_status.hdmi_rx_int[2] & AUD_MODE_CHANGE
> + ))
> + sp_hdmi_rx_restart_audio_chk(anx78xx);
> +
> + if (sp.hdmi_rx_int_status.hdmi_rx_int[5] & CTS_RCV)
> + sp_hdmi_rx_cts_rcv_int(anx78xx);
> +
> + if (sp.hdmi_rx_int_status.hdmi_rx_int[4] & AUDIO_RCV)
> + sp_hdmi_rx_audio_rcv_int(anx78xx);
> +
> +
> + if (sp.hdmi_rx_int_status.hdmi_rx_int[1] & HDCP_ERR)
> + sp_hdmi_rx_hdcp_error_int(anx78xx);
> +
> + if (sp.hdmi_rx_int_status.hdmi_rx_int[5] & NEW_CP)
> + sp_hdmi_rx_new_gcp_int(anx78xx);
> +
> + if (sp.hdmi_rx_int_status.hdmi_rx_int[1] & AUDIO_SAMPLE_CHANGE)
> + sp_hdmi_rx_audio_samplechg_int(anx78xx);
> + }
> +}
> +
> +static void sp_tx_show_information(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 c, c1;
> + u16 h_res, h_act, v_res, v_act;
> + u16 h_fp, h_sw, h_bp, v_fp, v_sw, v_bp;
> + ulong fresh_rate;
> + ulong pclk;
> +
> + dev_dbg(dev, "\n***************SP Video Information****************\n");
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_LINK_BW_SET_REG, &c);
Use sp_tx_get_link_bw.
> + switch (c) {
> + case 0x06:
> + dev_dbg(dev, "BW = 1.62G\n");
> + break;
> + case 0x0a:
> + dev_dbg(dev, "BW = 2.7G\n");
> + break;
> + case 0x14:
> + dev_dbg(dev, "BW = 5.4G\n");
> + break;
> + case 0x19:
> + dev_dbg(dev, "BW = 6.75G\n");
> + break;
> + default:
> + break;
> + }
> +
> + pclk = sp_tx_pclk_calc(anx78xx);
> + pclk = pclk / 10;
> +
> + sp_read_reg(anx78xx, TX_P2, SP_TX_TOTAL_LINE_STA_L, &c);
> + sp_read_reg(anx78xx, TX_P2, SP_TX_TOTAL_LINE_STA_H, &c1);
> +
> + v_res = c1;
> + v_res = v_res << 8;
> + v_res = v_res + c;
> +
> +
> + sp_read_reg(anx78xx, TX_P2, SP_TX_ACT_LINE_STA_L, &c);
> + sp_read_reg(anx78xx, TX_P2, SP_TX_ACT_LINE_STA_H, &c1);
> +
> + v_act = c1;
> + v_act = v_act << 8;
> + v_act = v_act + c;
> +
> +
> + sp_read_reg(anx78xx, TX_P2, SP_TX_TOTAL_PIXEL_STA_L, &c);
> + sp_read_reg(anx78xx, TX_P2, SP_TX_TOTAL_PIXEL_STA_H, &c1);
> +
> + h_res = c1;
> + h_res = h_res << 8;
> + h_res = h_res + c;
> +
> +
> + sp_read_reg(anx78xx, TX_P2, SP_TX_ACT_PIXEL_STA_L, &c);
> + sp_read_reg(anx78xx, TX_P2, SP_TX_ACT_PIXEL_STA_H, &c1);
> +
> + h_act = c1;
> + h_act = h_act << 8;
> + h_act = h_act + c;
> +
> + sp_read_reg(anx78xx, TX_P2, SP_TX_H_F_PORCH_STA_L, &c);
> + sp_read_reg(anx78xx, TX_P2, SP_TX_H_F_PORCH_STA_H, &c1);
> +
> + h_fp = c1;
> + h_fp = h_fp << 8;
> + h_fp = h_fp + c;
> +
> + sp_read_reg(anx78xx, TX_P2, SP_TX_H_SYNC_STA_L, &c);
> + sp_read_reg(anx78xx, TX_P2, SP_TX_H_SYNC_STA_H, &c1);
> +
> + h_sw = c1;
> + h_sw = h_sw << 8;
> + h_sw = h_sw + c;
> +
> + sp_read_reg(anx78xx, TX_P2, SP_TX_H_B_PORCH_STA_L, &c);
> + sp_read_reg(anx78xx, TX_P2, SP_TX_H_B_PORCH_STA_H, &c1);
> +
> + h_bp = c1;
> + h_bp = h_bp << 8;
> + h_bp = h_bp + c;
> +
> + sp_read_reg(anx78xx, TX_P2, SP_TX_V_F_PORCH_STA, &c);
> + v_fp = c;
> +
> + sp_read_reg(anx78xx, TX_P2, SP_TX_V_SYNC_STA, &c);
> + v_sw = c;
> +
> + sp_read_reg(anx78xx, TX_P2, SP_TX_V_B_PORCH_STA, &c);
> + v_bp = c;
> +
> + dev_dbg(dev, "Total resolution is %d * %d\n", h_res, v_res);
> +
> + dev_dbg(dev, "HF=%d, HSW=%d, HBP=%d\n", h_fp, h_sw, h_bp);
> + dev_dbg(dev, "VF=%d, VSW=%d, VBP=%d\n", v_fp, v_sw, v_bp);
> + dev_dbg(dev, "Active resolution is %d * %d", h_act, v_act);
> +
> + if (h_res == 0 || v_res == 0)
> + fresh_rate = 0;
> + else {
> + fresh_rate = pclk * 1000;
> + fresh_rate = fresh_rate / h_res;
> + fresh_rate = fresh_rate * 1000;
> + fresh_rate = fresh_rate / v_res;
> + }
> + dev_dbg(dev, " @ %ldHz\n", fresh_rate);
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_VID_CTRL, &c);
> +
> + if ((c & 0x06) == 0x00)
> + dev_dbg(dev, "ColorSpace: RGB,");
> + else if ((c & 0x06) == 0x02)
> + dev_dbg(dev, "ColorSpace: YCbCr422,");
> + else if ((c & 0x06) == 0x04)
> + dev_dbg(dev, "ColorSpace: YCbCr444,");
> +
> + sp_read_reg(anx78xx, TX_P0, SP_TX_VID_CTRL, &c);
> +
> + if ((c & 0xe0) == 0x00)
> + dev_dbg(dev, "6 BPC\n");
> + else if ((c & 0xe0) == 0x20)
> + dev_dbg(dev, "8 BPC\n");
> + else if ((c & 0xe0) == 0x40)
> + dev_dbg(dev, "10 BPC\n");
> + else if ((c & 0xe0) == 0x60)
> + dev_dbg(dev, "12 BPC\n");
> +
> +
> + if (is_anx_dongle(anx78xx)) {
> + sp_tx_aux_dpcdread_bytes(anx78xx, 0x00, 0x05, 0x23, 1, &c);
> + dev_dbg(dev, "Analogix Dongle FW Ver %.2x\n", (u16)(c & 0x7f));
> + }
> +
> + dev_dbg(dev, "\n**************************************************\n");
> +}
> +
> +static void sp_clean_system_status(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> +
> + if (sp.need_clean_status) {
> + dev_dbg(dev, "sp_clean_system_status. A -> B;\n");
> + dev_dbg(dev, "A:");
> + sp_print_sys_state(anx78xx, sp.tx_system_state_bak);
> + dev_dbg(dev, "B:");
> + sp_print_sys_state(anx78xx, sp.tx_system_state);
> +
> + sp.need_clean_status = 0;
> + if (sp.tx_system_state_bak >= STATE_LINK_TRAINING) {
> + if (sp.tx_system_state >= STATE_AUDIO_OUTPUT)
> + hdmi_rx_mute_audio(anx78xx, 1);
> + else {
> + hdmi_rx_mute_video(anx78xx, 1);
> + sp_tx_video_mute(anx78xx, 1);
> + }
> + }
> + if (sp.tx_system_state_bak >= STATE_HDCP_AUTH
> + && sp.tx_system_state <= STATE_HDCP_AUTH) {
> + if (sp_i2c_read_byte(anx78xx, TX_P0, TX_HDCP_CTRL0)
> + & 0xFC)
> + sp_tx_clean_hdcp_status(anx78xx);
> + }
> +
> + if (sp.hcdp_state != HDCP_CAPABLE_CHECK)
> + sp.hcdp_state = HDCP_CAPABLE_CHECK;
> +
> + if (sp.tx_sc_state != SC_INIT)
> + sp.tx_sc_state = SC_INIT;
> + if (sp.tx_lt_state != LT_INIT)
> + sp.tx_lt_state = LT_INIT;
> + if (sp.tx_vo_state != VO_WAIT_VIDEO_STABLE)
> + sp.tx_vo_state = VO_WAIT_VIDEO_STABLE;
> + }
> +}
> +
> +/******************add for HDCP cap check********************/
> +static u8 sp_hdcp_cap_check(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + u8 g_hdcp_cap = 0;
> + u8 temp;
> +
> + if (AUX_OK == sp_tx_aux_dpcdread_bytes(anx78xx, 0x06, 0x80, 0x28, 1,
> + &temp))
> + g_hdcp_cap = (temp & 0x01) ? 1 : 0;
> + else
> + dev_dbg(dev, "HDCP CAPABLE: read AUX err!\n");
> +
> + dev_dbg(dev, "hdcp cap check: %s Supported\n",
> + g_hdcp_cap ? "" : "No");
> +
> + return g_hdcp_cap;
> +}
> +/******************End HDCP cap check********************/
> +
> +static void sp_tasks_handler(struct anx78xx *anx78xx)
> +{
> + sp_system_isr_handler(anx78xx);
> + sp_hdcp_external_ctrl_flag_monitor(anx78xx);
> + sp_clean_system_status(anx78xx);
> + /*clear up backup system state*/
> + if (sp.tx_system_state_bak != sp.tx_system_state)
> + sp.tx_system_state_bak = sp.tx_system_state;
> +}
> +/******************End task process********************/
> +
> +void sp_main_process(struct anx78xx *anx78xx)
> +{
> + sp_state_process(anx78xx);
> + if (sp.tx_system_state > STATE_WAITTING_CABLE_PLUG) {
> + sp_int_rec(anx78xx);
> + sp_tasks_handler(anx78xx);
> + }
> +}
> +
> diff --git a/drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.h b/drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.h
> new file mode 100644
> index 0000000..371ba29
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.h
> @@ -0,0 +1,215 @@
> +/*
> + * Copyright(c) 2015, Analogix Semiconductor. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __SLIMPORT_TX_DRV_H
> +#define __SLIMPORT_TX_DRV_H
> +
> +#include "anx78xx.h"
> +#include "slimport_tx_reg.h"
> +
> +#define FW_VERSION 0x22
> +
> +#define DVI_MODE 0x00
> +#define HDMI_MODE 0x01
> +
> +#define SP_POWER_ON 1
> +#define SP_POWER_DOWN 0
> +
> +#define MAX_BUF_CNT 16
> +
> +#define SP_BREAK(current_status, next_status) \
> + { if (next_status != (current_status) + 1) break; }
> +
> +enum rx_cbl_type {
> + DWN_STRM_IS_NULL,
> + DWN_STRM_IS_HDMI,
> + DWN_STRM_IS_DIGITAL,
> + DWN_STRM_IS_ANALOG,
> + DWN_STRM_NUM
> +};
cable_type, and DOWN_STREAM.
> +
> +enum sp_tx_state {
> + STATE_WAITTING_CABLE_PLUG,
WAITING
> + STATE_SP_INITIALIZED,
> + STATE_SINK_CONNECTION,
> + STATE_PARSE_EDID,
> + STATE_LINK_TRAINING,
> + STATE_VIDEO_OUTPUT,
> + STATE_HDCP_AUTH,
> + STATE_AUDIO_OUTPUT,
> + STATE_PLAY_BACK
> +};
> +
> +enum sp_tx_power_block {
> + SP_TX_PWR_REG = REGISTER_PD,
> + SP_TX_PWR_HDCP = HDCP_PD,
> + SP_TX_PWR_AUDIO = AUDIO_PD,
> + SP_TX_PWR_VIDEO = VIDEO_PD,
> + SP_TX_PWR_LINK = LINK_PD,
> + SP_TX_PWR_TOTAL = TOTAL_PD,
> + SP_TX_PWR_NUMS
> +};
> +
> +enum hdmi_color_depth {
> + HDMI_LEGACY = 0x00,
> + HDMI_24BIT = 0x04,
> + HDMI_30BIT = 0x05,
> + HDMI_36BIT = 0x06,
> + HDMI_48BIT = 0x07,
> +};
> +
> +enum sp_tx_send_msg {
> + MSG_OCM_EN,
> + MSG_INPUT_HDMI,
> + MSG_INPUT_DVI,
> + MSG_CLEAR_IRQ,
> +};
> +
> +enum sink_connection_status {
> + SC_INIT,
> + SC_CHECK_CABLE_TYPE,
> + SC_WAITTING_CABLE_TYPE = SC_CHECK_CABLE_TYPE+5,
> + SC_SINK_CONNECTED,
> + SC_NOT_CABLE,
> + SC_STATE_NUM
> +};
> +
> +enum cable_type_status {
> + CHECK_AUXCH,
> + GETTED_CABLE_TYPE,
> + CABLE_TYPE_STATE_NUM
> +};
> +
> +enum sp_tx_lt_status {
> + LT_INIT,
> + LT_WAIT_PLL_LOCK,
> + LT_CHECK_LINK_BW,
> + LT_START,
> + LT_WAITTING_FINISH,
> + LT_ERROR,
> + LT_FINISH,
> + LT_END,
> + LT_STATES_NUM
> +};
> +
> +enum hdcp_status {
> + HDCP_CAPABLE_CHECK,
> + HDCP_WAITTING_VID_STB,
> + HDCP_HW_ENABLE,
> + HDCP_WAITTING_FINISH,
> + HDCP_FINISH,
> + HDCP_FAILE,
> + HDCP_NOT_SUPPORT,
> + HDCP_PROCESS_STATE_NUM
> +};
> +
> +enum video_output_status {
> + VO_WAIT_VIDEO_STABLE,
> + VO_WAIT_TX_VIDEO_STABLE,
> + VO_CHECK_VIDEO_INFO,
> + VO_FINISH,
> + VO_STATE_NUM
> +};
> +
> +enum audio_output_status {
> + AO_INIT,
> + AO_CTS_RCV_INT,
> + AO_AUDIO_RCV_INT,
> + AO_RCV_INT_FINISH,
> + AO_OUTPUT,
> + AO_STATE_NUM
> +};
> +
> +struct packet_avi {
> + u8 avi_data[13];
> +};
> +
> +
> +struct packet_spd {
> + u8 spd_data[25];
> +};
> +
> +struct packet_mpeg {
> + u8 mpeg_data[13];
> +};
> +
> +struct audio_info_frame {
> + u8 type;
> + u8 version;
> + u8 length;
> + u8 pb_byte[11];
> +};
> +
> +enum packets_type {
> + AVI_PACKETS,
> + SPD_PACKETS,
> + MPEG_PACKETS,
> + VSI_PACKETS,
> + AUDIF_PACKETS
> +};
> +
> +struct common_int {
> + u8 common_int[5];
> + u8 change_flag;
> +};
> +
> +struct hdmi_rx_int {
> + u8 hdmi_rx_int[7];
> + u8 change_flag;
> +};
> +
> +enum xtal_enum {
> + XTAL_19D2M,
> + XTAL_24M,
> + XTAL_25M,
> + XTAL_26M,
> + XTAL_27M,
> + XTAL_38D4M,
> + XTAL_52M,
> + XTAL_NOT_SUPPORT,
> + XTAL_CLK_NUM
Since these are actually register values, I'd assign them a value here
(e.g. XTAL_19D2M = 0, XTAL_24M = 1, etc.).
> +};
> +
> +enum sp_ssc_dep {
> + SSC_DEP_DISABLE = 0x0,
> + SSC_DEP_500PPM,
> + SSC_DEP_1000PPM,
> + SSC_DEP_1500PPM,
> + SSC_DEP_2000PPM,
> + SSC_DEP_2500PPM,
> + SSC_DEP_3000PPM,
> + SSC_DEP_3500PPM,
> + SSC_DEP_4000PPM,
> + SSC_DEP_4500PPM,
> + SSC_DEP_5000PPM,
> + SSC_DEP_5500PPM,
> + SSC_DEP_6000PPM
> +};
> +
> +struct anx78xx_clock_data {
> + unsigned char xtal_clk;
> + unsigned int xtal_clk_m10;
> +};
> +
> +bool sp_chip_detect(struct anx78xx *anx78xx);
> +
> +void sp_main_process(struct anx78xx *anx78xx);
> +
> +void sp_tx_variable_init(void);
> +
> +u8 sp_tx_cur_states(void);
> +
> +void sp_tx_clean_state_machine(void);
> +
> +#endif
> diff --git a/drivers/gpu/drm/bridge/anx78xx/slimport_tx_reg.h b/drivers/gpu/drm/bridge/anx78xx/slimport_tx_reg.h
> new file mode 100644
> index 0000000..8d89382
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/anx78xx/slimport_tx_reg.h
> @@ -0,0 +1,786 @@
> +/*
> + * Copyright(c) 2015, Analogix Semiconductor. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __SLIMPORT_TX_REG_DEF_H
> +#define __SLIMPORT_TX_REG_DEF_H
> +
> +#define TX_P0 0x70
> +#define TX_P1 0x7A
> +#define TX_P2 0x72
> +
> +#define RX_P0 0x7e
> +#define RX_P1 0x80
> +
> +/***************************************************************/
> +/*Register definition of device address 0x7e*/
> +#define HDMI_RX_PORT_SEL_REG 0x10
> +#define DDC_EN 0x10
> +#define TMDS_EN 0x01
> +
> +#define RX_SRST 0x11
> +#define VIDEO_RST 0x10
> +#define HDCP_MAN_RST 0X04
> +#define TMDS_RST 0X02
> +#define SW_MAN_RST 0X01
> +
> +#define RX_SW_RST2 0x12
> +#define DDC_RST 0x04
> +
> +#define HDMI_RX_SYS_STATUS_REG 0X14
> +#define PWR5V 0X08
> +#define TMDS_VSYNC_DET 0X04
> +#define TMDS_CLOCK_DET 0X02
> +#define TMDS_DE_DET 0X01
> +
> +#define HDMI_STATUS 0X15
> +#define DEEP_COLOR_MODE 0X40
> +#define HDMI_AUD_LAYOUT 0X08
> +#define MUTE_STAT 0X04
> +
> +#define RX_MUTE_CTRL 0X16
> +#define MUTE_POL 0X04
> +#define AUD_MUTE 0X02
> +#define VID_MUTE 0X01
> +
> +#define HDMI_RX_SYS_CTRL1_REG 0X17
> +
> +#define RX_SYS_PWDN1 0X18
> +#define PWDN_CTRL 0X01
> +
> +#define RX_AEC_CTRL 0X20
> +#define AVC_OE 0x80
> +#define AAC_OE 0X40
> +#define AVC_EN 0X02
> +#define AAC_EN 0X01
> +
> +#define RX_AEC_EN0 0X24
> +#define AEC_EN07 0X80
> +#define AEC_EN06 0X40
> +#define AEC_EN05 0X20
> +#define AEC_EN04 0X10
> +#define AEC_EN03 0X08
> +#define AEC_EN02 0X04
> +#define AEC_EN01 0X02
> +#define AEC_EN00 0X01
> +
> +#define RX_AEC_EN1 0X25
> +#define AEC_EN15 0X80
> +#define AEC_EN14 0X40
> +#define AEC_EN13 0X20
> +#define AEC_EN12 0X10
> +#define AEC_EN11 0X08
> +#define AEC_EN10 0X04
> +#define AEC_EN09 0X02
> +#define AEC_EN08 0X01
> +
> +#define RX_AEC_EN2 0X26
> +#define AEC_EN23 0X80
> +#define AEC_EN22 0X40
> +#define AEC_EN21 0X20
> +#define AEC_EN20 0X10
> +#define AEC_EN19 0X08
> +#define AEC_EN18 0X04
> +#define AEC_EN17 0X02
> +#define AEC_EN16 0X01
> +
> +
> +#define HDMI_RX_INT_STATUS1_REG 0X31
> +#define HDMI_DVI 0X80
> +#define CKDT_CHANGE 0X40
> +#define SCDT_CHANGE 0X20
> +#define PCLK_CHANGE 0X10
> +#define PLL_UNLOCK 0X08
> +#define CABLE_UNPLUG 0X04
> +#define SET_MUTE 0X02
> +#define SW_INTR 0X01
> +
> +#define HDMI_RX_INT_STATUS2_REG 0X32
> +#define AUTH_START 0X80
> +#define AUTH_DONE 0X40
> +#define HDCP_ERR 0X20
> +#define ECC_ERR 0X10
> +#define AUDIO_SAMPLE_CHANGE 0X01
> +
> +#define HDMI_RX_INT_STATUS3_REG 0X33
> +#define AUD_MODE_CHANGE 0X01
> +
> +#define HDMI_RX_INT_STATUS4_REG 0X34
> +#define VSYNC_DET 0X80
> +#define SYNC_POL_CHANGE 0X40
> +#define V_RES_CHANGE 0X20
> +#define H_RES_CHANGE 0X10
> +#define I_P_CHANGE 0X08
> +#define DP_CHANGE 0X04
> +#define COLOR_DEPTH_CHANGE 0X02
> +#define COLOR_MODE_CHANGE 0X01
> +
> +#define HDMI_RX_INT_STATUS5_REG 0X35
> +#define VFIFO_OVERFLOW 0X80
> +#define VFIFO_UNDERFLOW 0X40
> +#define CTS_N_ERR 0X08
> +#define NO_AVI 0X02
> +#define AUDIO_RCV 0X01
> +
> +#define HDMI_RX_INT_STATUS6_REG 0X36
> +#define CTS_RCV 0X80
> +#define NEW_UNR_PKT 0X40
> +#define NEW_MPEG 0X20
> +#define NEW_AUD 0X10
> +#define NEW_SPD 0X08
> +#define NEW_ACP 0X04
> +#define NEW_AVI 0X02
> +#define NEW_CP 0X01
> +
> +#define HDMI_RX_INT_STATUS7_REG 0X37
> +#define NO_VSI 0X80
> +#define HSYNC_DET 0X20
> +#define NEW_VS 0X10
> +#define NO_ACP 0X08
> +#define REF_CLK_CHG 0X04
> +#define CEC_RX_READY 0X02
> +#define CEC_TX_DONE 0X01
> +
> +#define HDMI_RX_PKT_RX_INDU_INT_CTRL 0X3F
> +#define NEW_VS_CTRL 0X80
> +#define NEW_UNR 0X40
> +#define NEW_MPEG 0X20
> +#define NEW_AUD 0X10
> +#define NEW_SPD 0X08
> +#define NEW_ACP 0X04
> +#define NEW_AVI 0X02
> +
> +
> +#define HDMI_RX_INT_MASK1_REG 0X41
> +#define HDMI_RX_INT_MASK2_REG 0X42
> +#define HDMI_RX_INT_MASK3_REG 0X43
> +#define HDMI_RX_INT_MASK4_REG 0X44
> +#define HDMI_RX_INT_MASK5_REG 0X45
> +#define HDMI_RX_INT_MASK6_REG 0X46
> +#define HDMI_RX_INT_MASK7_REG 0X47
> +
> +#define HDMI_RX_TMDS_CTRL_REG1 0X50
> +#define HDMI_RX_TMDS_CTRL_REG2 0X51
> +#define HDMI_RX_TMDS_CTRL_REG4 0X53
> +#define HDMI_RX_TMDS_CTRL_REG5 0X54
> +#define HDMI_RX_TMDS_CTRL_REG6 0X55
> +#define HDMI_RX_TMDS_CTRL_REG7 0X56
> +#define TERM_PD 0x01
> +
> +#define HDMI_RX_TMDS_CTRL_REG18 0X61
> +#define PLL_RESET 0x10
> +
> +#define HDMI_RX_TMDS_CTRL_REG19 0X62
> +#define HDMI_RX_TMDS_CTRL_REG20 0X63
> +#define HDMI_RX_TMDS_CTRL_REG21 0X64
> +#define HDMI_RX_TMDS_CTRL_REG22 0X65
> +
> +
> +#define HDMI_RX_VIDEO_STATUS_REG1 0x70
> +#define COLOR_DEPTH 0xF0
> +#define DEFAULT_PHASE 0X08
> +#define VIDEO_TYPE 0X04
> +
> +
> +#define HDMI_RX_HTOTAL_LOW 0X71
> +#define HDMI_RX_HTOTAL_HIGH 0X72
> +#define HDMI_RX_VTOTAL_LOW 0X73
> +#define HDMI_RX_VTOTAL_HIGH 0X74
> +
> +#define HDMI_RX_HACT_LOW 0X75
> +#define HDMI_RX_HACT_HIGH 0X76
> +#define HDMI_RX_VACT_LOW 0X77
> +#define HDMI_RX_VACT_HIGH 0X78
> +
> +#define HDMI_RX_V_SYNC_WIDTH 0X79
> +#define HDMI_RX_V_BACK_PORCH 0X7A
> +#define HDMI_RX_H_FRONT_PORCH_LOW 0X7B
> +#define HDMI_RX_H_FRONT_PORCH_HIGH 0X7C
> +
> +#define HDMI_RX_H_SYNC_WIDTH_LOW 0X7D
> +#define HDMI_RX_H_SYNC_WIDTH_HIGH 0X7E
> +
> +#define RX_VID_DATA_RNG 0X83
> +#define YC_LIMT 0X10
> +#define OUTPUT_LIMIT_EN 0X08
> +#define OUTPUT_LIMIT_RANGE 0X04
> +#define R2Y_INPUT_LIMIT 0X02
> +#define XVYCC_LIMIT 0X01
> +
> +#define HDMI_RX_VID_OUTPUT_CTRL3_REG 0X86
> +
> +#define HDMI_RX_VID_PCLK_CNTR_REG 0X8B
> +
> +#define HDMI_RX_AUD_IN_CH_STATUS1_REG 0xC7
> +#define HDMI_RX_AUD_IN_CH_STATUS4_REG 0XCA
> +
> +#define RX_CEC_CTRL 0XD0
> +#define CEC_RX_EN 0X08
> +#define CEC_TX_ST 0X04
> +#define CEC_PIN_SEL 0X02
> +#define CEC_RST 0X01
> +
> +#define HDMI_RX_CEC_RX_STATUS_REG 0XD1
> +#define HDMI_RX_CEC_RX_BUSY 0X80
> +#define HDMI_RX_CEC_RX_FULL 0X20
> +#define HDMI_RX_CEC_RX_EMP 0X10
> +
> +#define HDMI_RX_CEC_TX_STATUS_REG 0XD2
> +#define HDMI_RX_CEC_TX_BUSY 0X80
> +#define HDMI_RX_CEC_TX_FAIL 0X40
> +#define HDMI_RX_CEC_TX_FULL 0X20
> +#define HDMI_RX_CEC_TX_EMP 0X10
> +
> +
> +#define HDMI_RX_CEC_FIFO_REG 0XD3
> +
> +#define RX_CEC_SPEED 0XD4
> +#define CEC_SPEED_27M 0x40
> +
> +#define HDMI_RX_HDMI_CRITERIA_REG 0XE1
> +
> +#define HDMI_RX_HDCP_EN_CRITERIA_REG 0XE2
> +#define ENC_EN_MODE 0X20
> +
> +#define RX_CHIP_CTRL 0XE3
> +#define MAN_HDMI5V_DET 0X08
> +#define PLLLOCK_CKDT_EN 0X04
> +#define ANALOG_CKDT_EN 0X02
> +#define DIGITAL_CKDT_EN 0X01
> +
> +#define RX_PACKET_REV_STA 0XF3
> +#define AVI_RCVD 0X40
> +#define VSI_RCVD 0X20
> +/***************************************************************/
> +/*Register definition of device address 0x80*/
> +
> +
> +#define HDMI_RX_HDCP_STATUS_REG 0X3F
> +#define ADV_CIPHER 0X80
> +#define LOAD_KEY_DONE 0X40
> +#define DECRYPT_EN 0X20
> +#define AUTH_EN 0X10
> +#define BKSV_DISABLE 0X02
> +#define CLEAR_RI 0X01
> +
> +#define HDMI_RX_SPD_TYPE_REG 0X40
> +#define HDMI_RX_SPD_VER_REG 0X41
> +#define HDMI_RX_SPD_LEN_REG 0X42
> +#define HDMI_RX_SPD_CHKSUM_REG 0X43
> +#define HDMI_RX_SPD_DATA00_REG 0X44
> +
> +#define HDMI_RX_ACP_HB0_REG 0X60
> +#define HDMI_RX_ACP_HB1_REG 0X61
> +#define HDMI_RX_ACP_HB2_REG 0X62
> +#define HDMI_RX_ACP_DATA00_REG 0X63
> +
> +#define HDMI_RX_AVI_TYPE_REG 0XA0
> +#define HDMI_RX_AVI_VER_REG 0XA1
> +#define HDMI_RX_AVI_LEN_REG 0XA2
> +#define HDMI_RX_AVI_CHKSUM_REG 0XA3
> +#define HDMI_RX_AVI_DATA00_REG 0XA4
> +
> +#define HDMI_RX_AUDIO_TYPE_REG 0XC0
> +#define HDMI_RX_AUDIO_VER_REG 0XC1
> +#define HDMI_RX_AUDIO_LEN_REG 0XC2
> +#define HDMI_RX_AUDIO_CHKSUM_REG 0XC3
> +#define HDMI_RX_AUDIO_DATA00_REG 0XC4
> +
> +#define HDMI_RX_MPEG_TYPE_REG 0XE0
> +#define HDMI_RX_MPEG_VER_REG 0XE1
> +#define HDMI_RX_MPEG_LEN_REG 0XE2
> +#define HDMI_RX_MPEG_CHKSUM_REG 0XE3
> +#define HDMI_RX_MPEG_DATA00_REG 0XE4
> +#define HDMI_RX_MPEG_DATA03_REG 0XE7
> +#define HDMI_RX_MPEG_DATA05_REG 0XE9
> +
> +#define HDMI_RX_SPD_INFO_CTRL 0X5F
> +#define HDMI_RX_ACP_INFO_CTRL 0X7F
> +
> +#define HDMI_RX_GENERAL_CTRL 0X9F
> +#define CLEAR_AVMUTE 0x10
> +#define SET_AVMUTE 0x01
> +
> +#define HDMI_RX_MPEG_VS_CTRL 0XDF
> +#define HDMI_RX_MPEG_VS_INFO_CTRL 0XFF
> +
> +
> +/***************************************************************/
> +/*Register definition of device address 0x70*/
> +#define SP_TX_HDCP_STATUS 0x00
> +#define SP_TX_HDCP_AUTH_PASS 0x02
> +
> +#define TX_HDCP_CTRL0 0x01
> +#define STORE_AN 0x80
> +#define RX_REPEATER 0x40
> +#define RE_AUTH 0x20
> +#define SW_AUTH_OK 0x10
> +#define HARD_AUTH_EN 0x08
> +#define ENC_EN 0x04
> +#define BKSV_SRM_PASS 0x02
> +#define KSVLIST_VLD 0x01
> +
> +#define SP_TX_HDCP_CTRL1_REG 0x02
> +#define AINFO_EN 0x04
> +#define RCV_11_EN 0x02
> +#define HDCP_11_EN 0x01
> +
> +#define SP_TX_HDCP_LINK_CHK_FRAME_NUM 0x03
> +#define SP_TX_HDCP_CTRL2_REG 0x04
> +
> +
> +#define SP_TX_VID_BLANK_SET1 0X2C
> +#define SP_TX_VID_BLANK_SET2 0X2D
> +#define SP_TX_VID_BLANK_SET3 0X2E
> +
> +#define SP_TX_WAIT_R0_TIME 0x40
> +#define SP_TX_LINK_CHK_TIMER 0x41
> +#define SP_TX_WAIT_KSVR_TIME 0X42
> +
> +#define HDCP_KEY_STATUS 0x5E
> +
> +
> +#define M_VID_0 0xC0
> +#define M_VID_1 0xC1
> +#define M_VID_2 0xC2
> +#define N_VID_0 0xC3
> +#define N_VID_1 0xC4
> +#define N_VID_2 0xC5
> +#define HDCP_AUTO_TIMER 0x51
> +#define HDCP_AUTO_TIMER_VAL 0x00
> +
> +#define HDCP_KEY_CMD 0x5F
> +#define DISABLE_SYNC_HDCP 0x04
> +
> +#define OTP_KEY_PROTECT1 0x60
> +#define OTP_KEY_PROTECT2 0x61
> +#define OTP_KEY_PROTECT3 0x62
> +#define OTP_PSW1 0xa2
> +#define OTP_PSW2 0x7e
> +#define OTP_PSW3 0xc6
> +
> +
> +#define SP_TX_SYS_CTRL1_REG 0x80
> +#define CHIP_AUTH_RESET 0x80
> +#define PD_BYPASS_CHIP_AUTH 0x40
> +#define DET_STA 0x04
> +#define FORCE_DET 0x02
> +#define DET_CTRL 0x01
> +
> +#define SP_TX_SYS_CTRL2_REG 0x81
> +#define CHA_STA 0x04
> +#define FORCE_CHA 0x02
> +#define CHA_CTRL 0x01
> +
> +#define SP_TX_SYS_CTRL3_REG 0x82
> +#define HPD_STATUS 0x40
> +#define F_HPD 0x20
> +#define HPD_CTRL 0x10
> +#define STRM_VALID 0x04
> +#define F_VALID 0x02
> +#define VALID_CTRL 0x01
> +
> +#define SP_TX_SYS_CTRL4_REG 0x83
> +#define ENHANCED_MODE 0x08
> +
> +#define SP_TX_VID_CTRL 0x84
> +
> +#define SP_TX_AUD_CTRL 0x87
> +#define AUD_EN 0x01
> +
> +#define I2C_GEN_10US_TIMER0 0x88
> +#define I2C_GEN_10US_TIMER1 0x89
> +
> +#define SP_TX_PKT_EN_REG 0x90
> +#define AUD_IF_UP 0x80
> +#define AVI_IF_UD 0x40
> +#define MPEG_IF_UD 0x20
> +#define SPD_IF_UD 0x10
> +#define AUD_IF_EN 0x08
> +#define AVI_IF_EN 0x04
> +#define MPEG_IF_EN 0x02
> +#define SPD_IF_EN 0x01
> +
> +#define TX_HDCP_CTRL 0x92
> +#define AUTO_EN 0x80
> +#define AUTO_START 0x20
> +#define LINK_POLLING 0x02
> +
> +#define SP_TX_LINK_BW_SET_REG 0xA0
> +#define LINK_6P75G 0x19
> +#define LINK_5P4G 0x14
> +#define LINK_2P7G 0x0A
> +#define LINK_1P62G 0x06
> +
> +#define SP_TX_TRAINING_PTN_SET_REG 0xA2
> +#define SCRAMBLE_DISABLE 0x20
> +
> +#define SP_TX_LT_SET_REG 0xA3
> +#define MAX_PRE_REACH 0x20
> +#define MAX_DRIVE_REACH 0x04
> +#define DRVIE_CURRENT_LEVEL1 0x01
> +#define PRE_EMP_LEVEL1 0x08
> +
> +
> +#define LT_CTRL 0xA8
> +#define SP_TX_LT_EN 0x01
> +
> +#define TX_DEBUG1 0xB0
> +#define FORCE_HPD 0X80
> +#define HPD_POLLING_DET 0x40
> +#define HPD_POLLING_EN 0x20
> +#define DEBUG_PLL_LOCK 0x10
> +#define FORCE_PLL_LOCK 0X08
> +#define POLLING_EN 0x02
> +
> +#define SP_TX_DP_POLLING_PERIOD 0xB3
> +
> +#define TX_DP_POLLING 0xB4
> +#define AUTO_POLLING_DISABLE 0x01
> +
> +#define TX_LINK_DEBUG 0xB8
> +#define M_VID_DEBUG 0x20
> +#define NEW_PRBS7 0x10
> +#define INSERT_ER 0x02
> +#define PRBS31_EN 0x01
> +
> +#define DPCD_200 0xB9
> +#define DPCD_201 0xBA
> +#define DPCD_202 0xBB
> +#define DPCD_203 0xBC
> +#define DPCD_204 0xBD
> +#define DPCD_205 0xBE
> +
> +#define SP_TX_PLL_CTRL_REG 0xC7
> +#define PLL_RST 0x40
> +
> +#define SP_TX_ANALOG_PD_REG 0xC8
> +#define MACRO_PD 0x20
> +#define AUX_PD 0x10
> +#define CH0_PD 0x01
> +
> +#define TX_MISC 0xCD
> +#define EQ_TRAINING_LOOP 0x40
> +
> +
> +#define SP_TX_DOWN_SPREADING_CTRL1 0xD0
> +#define SP_TX_SSC_DISABLE 0xC0
> +#define SP_TX_SSC_DWSPREAD 0x40
> +
> +
> +#define SP_TX_M_CALCU_CTRL 0xD9
> +#define M_GEN_CLK_SEL 0x01
> +
> +#define TX_EXTRA_ADDR 0xCE
> +#define I2C_STRETCH_DISABLE 0X80
> +#define I2C_EXTRA_ADDR 0X50
> +
> +#define SP_TX_AUX_STATUS 0xE0
> +#define AUX_BUSY 0x10
> +
> +#define AUX_DEFER_CTRL 0xE2
> +#define BUF_DATA_COUNT 0xE4
> +
> +#define AUX_CTRL 0xE5
> +#define AUX_ADDR_7_0 0xE6
> +#define AUX_ADDR_15_8 0xE7
> +#define AUX_ADDR_19_16 0xE8
> +
> +#define AUX_CTRL2 0xE9
> +#define ADDR_ONLY_BIT 0x02
> +#define AUX_OP_EN 0x01
> +
> +#define SP_TX_3D_VSC_CTRL 0xEA
> +#define INFO_FRAME_VSC_EN 0x01
> +
> +#define SP_TX_VSC_DB1 0xEB
> +
> +#define BUF_DATA_0 0xF0
> +
> +
> +/***************************************************************/
> +/*Register definition of device address 0x72*/
> +#define SP_TX_VND_IDL_REG 0x00
> +#define SP_TX_VND_IDH_REG 0x01
> +#define SP_TX_DEV_IDL_REG 0x02
> +#define SP_TX_DEV_IDH_REG 0x03
> +#define SP_TX_DEV_REV_REG 0x04
> +
> +#define SP_POWERD_CTRL_REG 0x05
> +#define REGISTER_PD 0x80
> +#define HDCP_PD 0x20
> +#define AUDIO_PD 0x10
> +#define VIDEO_PD 0x08
> +#define LINK_PD 0x04
> +#define TOTAL_PD 0x02
> +
> +#define SP_TX_RST_CTRL_REG 0x06
> +#define MISC_RST 0x80
> +#define VIDCAP_RST 0x40
> +#define VIDFIF_RST 0x20
> +#define AUDFIF_RST 0x10
> +#define AUDCAP_RST 0x08
> +#define HDCP_RST 0x04
> +#define SW_RST 0x02
> +#define HW_RST 0x01
> +
> +#define RST_CTRL2 0x07
> +#define AUX_RST 0x04
> +#define SERDES_FIFO_RST 0x02
> +#define I2C_REG_RST 0x01
> +
> +#define VID_CTRL1 0x08
> +#define VIDEO_EN 0x80
> +#define VIDEO_MUTE 0x40
> +#define IN_BIT_SEl 0x04
> +#define DDR_CTRL 0x02
> +#define EDGE_CTRL 0x01
> +
> +#define SP_TX_VID_CTRL2_REG 0x09
> +#define IN_BPC_12BIT 0x30
> +#define IN_BPC_10BIT 0x20
> +#define IN_BPC_8BIT 0x10
> +
> +#define SP_TX_VID_CTRL3_REG 0x0A
> +#define HPD_OUT 0x40
> +
> +#define SP_TX_VID_CTRL5_REG 0x0C
> +#define CSC_STD_SEL 0x80
> +#define RANGE_Y2R 0x20
> +#define CSPACE_Y2R 0x10
> +
> +#define SP_TX_VID_CTRL6_REG 0x0D
> +#define VIDEO_PROCESS_EN 0x40
> +#define UP_SAMPLE 0x02
> +#define DOWN_SAMPLE 0x01
> +
> +#define SP_TX_VID_CTRL8_REG 0x0F
> +#define VID_VRES_TH 0x01
> +
> +#define SP_TX_TOTAL_LINE_STA_L 0x24
> +#define SP_TX_TOTAL_LINE_STA_H 0x25
> +#define SP_TX_ACT_LINE_STA_L 0x26
> +#define SP_TX_ACT_LINE_STA_H 0x27
> +#define SP_TX_V_F_PORCH_STA 0x28
> +#define SP_TX_V_SYNC_STA 0x29
> +#define SP_TX_V_B_PORCH_STA 0x2A
> +#define SP_TX_TOTAL_PIXEL_STA_L 0x2B
> +#define SP_TX_TOTAL_PIXEL_STA_H 0x2C
> +#define SP_TX_ACT_PIXEL_STA_L 0x2D
> +#define SP_TX_ACT_PIXEL_STA_H 0x2E
> +#define SP_TX_H_F_PORCH_STA_L 0x2F
> +#define SP_TX_H_F_PORCH_STA_H 0x30
> +#define SP_TX_H_SYNC_STA_L 0x31
> +#define SP_TX_H_SYNC_STA_H 0x32
> +#define SP_TX_H_B_PORCH_STA_L 0x33
> +#define SP_TX_H_B_PORCH_STA_H 0x34
> +
> +#define SP_TX_DP_ADDR_REG1 0x3E
> +
> +#define SP_TX_VID_BIT_CTRL0_REG 0x40
> +#define SP_TX_VID_BIT_CTRL10_REG 0x4a
> +#define SP_TX_VID_BIT_CTRL20_REG 0x54
> +
> +#define SP_TX_AVI_TYPE 0x70
> +#define SP_TX_AVI_VER 0x71
> +#define SP_TX_AVI_LEN 0x72
> +#define SP_TX_AVI_DB0 0x73
> +
> +#define BIT_CTRL_SPECIFIC 0x80
> +#define ENABLE_BIT_CTRL 0x01
> +
> +#define SP_TX_AUD_TYPE 0x83
> +#define SP_TX_AUD_VER 0x84
> +#define SP_TX_AUD_LEN 0x85
> +#define SP_TX_AUD_DB0 0x86
> +
> +#define SP_TX_SPD_TYPE 0x91
> +#define SP_TX_SPD_VER 0x92
> +#define SP_TX_SPD_LEN 0x93
> +#define SP_TX_SPD_DB0 0x94
> +
> +#define SP_TX_MPEG_TYPE 0xB0
> +#define SP_TX_MPEG_VER 0xB1
> +#define SP_TX_MPEG_LEN 0xB2
> +#define SP_TX_MPEG_DB0 0xB3
> +
> +#define SP_TX_AUD_CH_STATUS_REG1 0xD0
> +
> +#define SP_TX_AUD_CH_NUM_REG5 0xD5
> +#define CH_NUM_8 0xE0
> +#define AUD_LAYOUT 0x01
> +
> +#define GPIO_1_CONTROL 0xD6
> +#define GPIO_1_PULL_UP 0x04
> +#define GPIO_1_OEN 0x02
> +#define GPIO_1_DATA 0x01
> +
> +#define TX_ANALOG_DEBUG2 0xDD
> +#define POWERON_TIME_1P5MS 0X03
> +
> +#define TX_PLL_FILTER 0xDF
> +#define PD_RING_OSC 0x40
> +#define V33_SWITCH_ON 0x08
> +
> +#define TX_PLL_FILTER5 0xE0
> +#define SP_TX_ANALOG_CTRL0 0xE1
> +#define P5V_PROTECT 0X80
> +#define SHORT_PROTECT 0X40
> +#define P5V_PROTECT_PD 0X20
> +#define SHORT_PROTECT_PD 0X10
> +
> +#define TX_ANALOG_CTRL 0xE5
> +#define SHORT_DPDM 0X4
> +
> +#define SP_COMMON_INT_STATUS1 0xF1
> +#define PLL_LOCK_CHG 0x40
> +#define VIDEO_FORMAT_CHG 0x08
> +#define AUDIO_CLK_CHG 0x04
> +#define VIDEO_CLOCK_CHG 0x02
> +
> +#define SP_COMMON_INT_STATUS2 0xF2
> +#define HDCP_AUTH_CHG 0x02
> +#define HDCP_AUTH_DONE 0x01
> +
> +#define SP_COMMON_INT_STATUS3 0xF3
> +#define HDCP_LINK_CHECK_FAIL 0x01
> +
> +#define SP_COMMON_INT_STATUS4 0xF4
> +#define PLUG 0x01
> +#define ESYNC_ERR 0x10
> +#define HPD_LOST 0x02
> +#define HPD_CHANGE 0x04
> +#define HPD_IRQ 0x40
> +
> +#define SP_TX_INT_STATUS1 0xF7
> +#define DPCD_IRQ_REQUEST 0x80
> +#define HPD 0x40
> +#define TRAINING_Finish 0x20
> +#define POLLING_ERR 0x10
> +#define LINK_CHANGE 0x04
> +#define SINK_CHG 0x08
> +
> +#define SP_COMMON_INT_MASK1 0xF8
> +#define SP_COMMON_INT_MASK2 0xF9
> +#define SP_COMMON_INT_MASK3 0xFA
> +#define SP_COMMON_INT_MASK4 0xFB
> +#define SP_INT_MASK 0xFE
> +#define SP_TX_INT_CTRL_REG 0xFF
> +
> +
> +/***************************************************************/
> +/*Register definition of device address 0x7a*/
> +
> +#define SP_TX_LT_CTRL_REG0 0x30
> +#define SP_TX_LT_CTRL_REG1 0x31
> +#define SP_TX_LT_CTRL_REG2 0x34
> +#define SP_TX_LT_CTRL_REG3 0x35
> +#define SP_TX_LT_CTRL_REG4 0x36
> +#define SP_TX_LT_CTRL_REG5 0x37
> +#define SP_TX_LT_CTRL_REG6 0x38
> +#define SP_TX_LT_CTRL_REG7 0x39
> +#define SP_TX_LT_CTRL_REG8 0x3A
> +#define SP_TX_LT_CTRL_REG9 0x3B
> +#define SP_TX_LT_CTRL_REG10 0x40
> +#define SP_TX_LT_CTRL_REG11 0x41
> +#define SP_TX_LT_CTRL_REG12 0x44
> +#define SP_TX_LT_CTRL_REG13 0x45
> +#define SP_TX_LT_CTRL_REG14 0x46
> +#define SP_TX_LT_CTRL_REG15 0x47
> +#define SP_TX_LT_CTRL_REG16 0x48
> +#define SP_TX_LT_CTRL_REG17 0x49
> +#define SP_TX_LT_CTRL_REG18 0x4A
> +#define SP_TX_LT_CTRL_REG19 0x4B
> +
> +#define SP_TX_AUD_INTERFACE_CTRL0 0x5f
> +#define AUD_INTERFACE_DISABLE 0x80
> +
> +#define SP_TX_AUD_INTERFACE_CTRL2 0x60
> +#define M_AUD_ADJUST_ST 0x04
> +
> +#define SP_TX_AUD_INTERFACE_CTRL3 0x62
> +#define SP_TX_AUD_INTERFACE_CTRL4 0x67
> +#define SP_TX_AUD_INTERFACE_CTRL5 0x68
> +#define SP_TX_AUD_INTERFACE_CTRL6 0x69
> +
> +#define OCM_REG3 0x96
> +#define OCM_RST 0x80
> +
> +#define FW_VER_REG 0xB7
> +
> +
> +/***************************************************************/
> +/*Definition of DPCD*/
> +
> +
> +#define DOWN_R_TERM_DET _BIT6
> +#define SRAM_EEPROM_LOAD_DONE _BIT5
> +#define SRAM_CRC_CHK_DONE _BIT4
> +#define SRAM_CRC_CHK_PASS _BIT3
> +#define DOWN_STRM_ENC _BIT2
> +#define DOWN_STRM_AUTH _BIT1
> +#define DOWN_STRM_HPD _BIT0
> +
> +
> +#define DPCD_DPCD_REV 0x00
> +#define DPCD_MAX_LINK_RATE 0x01
> +
> +#define DPCD_MAX_LANE_COUNT 0x02
> +#define ENHANCED_FRAME_CAP 0x80
> +
> +#define DPCD_MAX_DOWNSPREAD 0x03
> +#define DPCD_NORP 0x04
> +#define DPCD_DSPORT_PRESENT 0x05
> +
> +#define DPCD_LINK_BW_SET 0x00
> +#define DPCD_LANE_COUNT_SET 0x01
> +#define ENHANCED_FRAME_EN 0x80
> +
> +#define DPCD_TRAINING_PATTERN_SET 0x02
> +#define DPCD_TRAINNIG_LANE0_SET 0x03
> +
> +#define DPCD_DOWNSPREAD_CTRL 0x07
> +#define SPREAD_AMPLITUDE 0X10
> +
> +#define DPCD_SINK_COUNT 0x00
> +#define DPCD_SERVICE_IRQ_VECTOR 0x01
> +#define TEST_IRQ 0x02
> +#define CP_IRQ 0x04
> +#define SINK_SPECIFIC_IRQ 0x40
> +
> +#define DPCD_LANE0_1_STATUS 0x02
> +
> +#define DPCD_LANE_ALIGN_UD 0x04
> +#define DPCD_SINK_STATUS 0x05
> +
> +#define DPCD_TEST_RESPONSE 0x60
> +#define TEST_ACK 0x01
> +#define DPCD_TEST_EDID_CHECKSUM_WRITE 0x04
> +
> +#define DPCD_TEST_EDID_CHECKSUM 0x61
> +
> +
> +#define DPCD_SPECIFIC_INTERRUPT1 0x10
> +#define DPCD_USER_COMM1 0x22
> +
> +#define DPCD_SPECIFIC_INTERRUPT2 0x11
> +
> +#define DPCD_TEST_REQUEST 0x18
> +#define DPCD_TEST_LINK_RATE 0x19
> +
> +#define DPCD_TEST_LANE_COUNT 0x20
> +
> +#define DPCD_PHY_TEST_PATTERN 0x48
> +
> +#endif
> +
> --
> 2.1.0
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
