The LEDs on Odroid XU3 family boards could not properly probe because PWM outputs were reduced only to PWM for fan. Fix it for Odroid XU3 and XU3-Lite boards by switching to usage of all 4 outputs (although the PWM for MIPI probably is redundant because board does not have MIPI connector available). This fixes warnings on dmesg: [ 4.838712] samsung-pwm 12dd0000.pwm: tried to request PWM channel 1 without output [ 4.838725] leds_pwm pwmleds: unable to request PWM for green:mmc0: -22 [ 4.838767] leds_pwm: probe of pwmleds failed with error -22 Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx> --- Changes since v1: 1. Do not rebase on patchset adding support for Odroid XU4 board. Rebase just on current next. --- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index dd8bc86d9de4..90d298dce851 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -473,7 +473,6 @@ */ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; pinctrl-names = "default"; - samsung,pwm-outputs = <0>; status = "okay"; }; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
