Now that the driver respects IRQ trigger settings from device tree, let's
fix them up in individual DTSes (note that the driver is still compatible
with older DTSes).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
arch/arm/boot/dts/am437x-sk-evm.dts | 2 +-
arch/arm/boot/dts/imx28-tx28.dts | 3 ++-
arch/arm/boot/dts/imx53-tx53-x03x.dts | 3 ++-
arch/arm/boot/dts/imx6qdl-tx6.dtsi | 3 ++-
4 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index c17097d..d83fdcd 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -471,7 +471,7 @@
reg = <0x38>;
interrupt-parent = <&gpio0>;
- interrupts = <31 0>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index a5b27c8..4ea8934 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -13,6 +13,7 @@
/dts-v1/;
#include "imx28.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Ka-Ro electronics TX28 module";
@@ -324,7 +325,7 @@
pinctrl-names = "default";
pinctrl-0 = <&tx28_edt_ft5x06_pins>;
interrupt-parent = <&gpio2>;
- interrupts = <5 0>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index 3b73e81..13e842b 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "imx53-tx53.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
/ {
@@ -216,7 +217,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
interrupt-parent = <&gpio6>;
- interrupts = <15 0>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index da08de3..13cb7cc 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
/ {
@@ -272,7 +273,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_edt_ft5x06>;
interrupt-parent = <&gpio6>;
- interrupts = <15 0>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
linux,wakeup;
--
2.6.0.rc0.131.gf624c3d
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
