[PATCH 0/7] tty: serial: msm: Add DMA support and fix bit definitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

Following patches add DMA support for UARTDM type of hardware.

Changes have been tested on UARTDM v1.3(APQ8064) and v1.4(APQ8016).

Patches from Gurav were published long ago here[1], I just addressed
remaining comments and coding style issues.

Any comments are welcome.

Regards,
Ivan

Ivan T. Ivanov (5):
  tty: serial: msm: Fix command Stale Event Enable definition
  tty: serial: msm: Add msm prefix to all driver functions
  tty: serial: msm: Add TX DMA support
  tty: serial: msm: Add RX DMA support
  tty: serial: msm: Remove 115.2 Kbps maximum baud rate limitation

Pramod Gurav (2):
  tty: serial: msm: Add mask value for UART_DM registers
  tty: serial: msm: replaces (1 << x) with BIT(x) macro

[1] http://www.spinics.net/lists/linux-serial/msg16874.html


 .../devicetree/bindings/serial/qcom,msm-uartdm.txt |   6 +
 drivers/tty/serial/msm_serial.c                    | 616 +++++++++++++++++++--
 drivers/tty/serial/msm_serial.h                    |  55 +-
 3 files changed, 604 insertions(+), 73 deletions(-)

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux