> On 11.09.2015, at 00:22, Eric Anholt <eric@xxxxxxxxxx> wrote: > > There are a pair of SPI masters and a mini UART that were last minute > additions. As a result, they didn't get integrated in the same way as > the other gates off of the VPU clock in CPRMAN. > > Signed-off-by: Eric Anholt <eric@xxxxxxxxxx> > --- Tested with the spi-bcm2835aux driver and it works perfectly. I will now post the latest incarnation of the driver for inclusion. I have also tested with the uart1 and it works in principle. Note that there is one issue (as mentioned elsewhere) with uart1: the 8250 serial driver has a (hardcoded) internal clock divider 16, while the hardware has an internal divider of 8. This results in baud rates that are a factor of 2 higher than requested. Tested-by: Martin Sperl <kernel@xxxxxxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html