On 2015년 09월 10일 20:41, Charles Keepax wrote: > From: Nariman Poushin <nariman@xxxxxxxxxxxxxxxxxxxxxxxxxxx> > > The polarity of MICD_CLAMP_STS does not change when different clamp > modes are used, this patch corrects this issue. > > Signed-off-by: Nariman Poushin <nariman@xxxxxxxxxxxxxxxxxxxxxxxxxxx> > Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx> > --- > drivers/extcon/extcon-arizona.c | 5 +---- > 1 files changed, 1 insertions(+), 4 deletions(-) > > diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c > index 7bfaacd..6d030a0 100644 > --- a/drivers/extcon/extcon-arizona.c > +++ b/drivers/extcon/extcon-arizona.c > @@ -1059,10 +1059,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data) > > if (arizona->pdata.jd_gpio5) { > mask = ARIZONA_MICD_CLAMP_STS; > - if (arizona->pdata.jd_invert) > - present = ARIZONA_MICD_CLAMP_STS; > - else > - present = 0; > + present = 0; > } else { > mask = ARIZONA_JD1_STS; > if (arizona->pdata.jd_invert) > Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> Thanks, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html