On Thu, Sep 3, 2015 at 7:16 AM, Marc Zyngier <marc.zyngier@xxxxxxx> wrote:
> Both pci-host-generic and Pseries parse the "linux,pci-probe-only"
> property to engage the PCI_PROBE_ONLY mode, and both have a subtle
> bug that can be triggered if the property has no parameter.
>
> Provide a generic, safe implementation that can be used by both.
Sorry, but a couple of other minor things I noticed.
>
> Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
> ---
> drivers/of/of_pci.c | 31 +++++++++++++++++++++++++++++++
> include/linux/of_pci.h | 3 +++
> 2 files changed, 34 insertions(+)
>
> diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
> index 5751dc5..7876343 100644
> --- a/drivers/of/of_pci.c
> +++ b/drivers/of/of_pci.c
> @@ -118,6 +118,37 @@ int of_get_pci_domain_nr(struct device_node *node)
> EXPORT_SYMBOL_GPL(of_get_pci_domain_nr);
>
> /**
> + * of_pci_check_probe_only - Setup probe only mode if linux,pci-probe-only
> + * is present and valid
> + *
> + * @node: device tree node that may contain the property (usually "chosen")
> + *
> + */
> +void of_pci_check_probe_only(struct device_node *node)
This property is only valid in /chosen, so there's no point passing
of_chosen in and you can constrain it to only look in /chosen.
> +{
> + u32 val;
> + int ret;
> +
> + if (!node)
> + return;
I believe of_property_read_u32 will check this.
> +
> + ret = of_property_read_u32(node, "linux,pci-probe-only", &val);
> + if (ret) {
> + if (ret == -ENODATA || ret == -EOVERFLOW)
> + pr_warn("linux,pci-probe-only without valid value, ignoring\n");
> + return;
> + }
> +
> + if (val)
> + pci_add_flags(PCI_PROBE_ONLY);
> + else
> + pci_clear_flags(PCI_PROBE_ONLY);
> +
> + pr_info("PCI: PROBE_ONLY %sabled\n", val ? "en" : "dis");
> +}
> +EXPORT_SYMBOL_GPL(of_pci_check_probe_only);
> +
> +/**
> * of_pci_dma_configure - Setup DMA configuration
> * @dev: ptr to pci_dev struct of the PCI device
> *
> diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
> index 29fd3fe..4c0a617 100644
> --- a/include/linux/of_pci.h
> +++ b/include/linux/of_pci.h
> @@ -17,6 +17,7 @@ int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin);
> int of_pci_parse_bus_range(struct device_node *node, struct resource *res);
> int of_get_pci_domain_nr(struct device_node *node);
> void of_pci_dma_configure(struct pci_dev *pci_dev);
> +void of_pci_check_probe_only(struct device_node *node);
> #else
> static inline int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
> {
> @@ -53,6 +54,8 @@ of_get_pci_domain_nr(struct device_node *node)
> }
>
> static inline void of_pci_dma_configure(struct pci_dev *pci_dev) { }
> +
> +static inline void of_pci_check_probe_only(struct device_node *node) { }
> #endif
>
> #if defined(CONFIG_OF_ADDRESS)
> --
> 2.1.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
