On Wed, Sep 02, 2015 at 07:13:24PM -0500, Rob Herring wrote: > On Wed, Sep 2, 2015 at 4:25 PM, Douglas Anderson <dianders@xxxxxxxxxxxx> wrote: > > The ddc-i2c-bus property was missing from the veyron dtsi file since > > downstream the ddc-i2c-bus was still being specified in rk3288.dtsi and > > nobody noticed when the veyron dtsi was sent upstream. Add it. > > > > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> > > --- > > Note: I noticed that this was wrong but I don't currently have > > graphics up and running on upstream on veyron. Posting this anyway > > since it's pretty clear that it's needed. If someone else wants to > > try it out that'd be nice, otherwise I'll put it on my list to figure > > out how to get myself setup for graphics upstream. ;) > > Based on your other patch, this is temporary, right? > > I've been looking at DRM a lot lately. I think specifying the i2c bus > in the hdmi chip or IP block node is wrong. If the I2C host is > separate from the HDMI block, then it's only connection is to the HDMI > connector. So the I2C host to the connector relationship is what the > DT should describe. HPD gpio is similar. Now if the HDMI bridge > controls DDC and HPD directly, then we don't need to describe those > connections. Except... we don't generally model connectors under DRM as a general rule. (The fbdev video connector stuff happened without very much publicity afaics.) It's not always appropriate to split it out from the bridge in any case. Consider something like a TDA998x where the TDA998x itself takes care of reading the DDC bus, and doesn't provide an I2C-like interface. If you try and split that into "bridge" or "encoder" and "connector" you end up having to invent a new kind of I2C thing which isn't an I2C adapter, or somehow squeezing an I2C adapter which isn't into the I2C layer. The TDA998x provides an interface to read a block of EDID at a time. It always does the page register access. You don't get to read it byte wise. It doesn't fit into I2C as an adapter at all. -- FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html