Re: [PATCH v3 4/6] [media] c8sectpfe: Update binding to reset-gpios

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, 01 Sep 2015, Javier Martinez Canillas wrote:

> Hello Lee,
> 
> On Tue, Sep 1, 2015 at 11:09 AM, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> > On Tue, 01 Sep 2015, Javier Martinez Canillas wrote:
> >> On Fri, Aug 28, 2015 at 7:52 PM, Peter Griffin <peter.griffin@xxxxxxxxxx> wrote:
> >> > gpio.txt documents that GPIO properties should be named
> >> > "[<name>-]gpios", with <name> being the purpose of this
> >> > GPIO for the device.
> >> >
> >> > This change has been done as one atomic commit.
> >> >
> >> > Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> >> > Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
> >> > ---
> >> >  Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt | 6 +++---
> >> >  arch/arm/boot/dts/stihxxx-b2120.dtsi                          | 4 ++--
> >> >  drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c         | 2 +-
> >> >  3 files changed, 6 insertions(+), 6 deletions(-)
> >> >
> >> > diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
> >> > index d4def76..e70d840 100644
> >> > --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
> >> > +++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
> >> > @@ -35,7 +35,7 @@ Required properties (tsin (child) node):
> >> >
> >> >  - tsin-num     : tsin id of the InputBlock (must be between 0 to 6)
> >> >  - i2c-bus      : phandle to the I2C bus DT node which the demodulators & tuners on this tsin channel are connected.
> >> > -- rst-gpio     : reset gpio for this tsin channel.
> >> > +- reset-gpios  : reset gpio for this tsin channel.
> >>
> >> The documentation is a bit outdated, the GPIO subsystem supports both
> >> -gpio and -gpios, see commit:
> >>
> >> dd34c37aa3e8 ("gpio: of: Allow -gpio suffix for property names")
> >>
> >> So it makes sense to me to use -gpio instead of -gpios in this case
> >> since is a single GPIO. Also rst is already a descriptive name since
> >> that's how many datasheets name a reset pin. I'm not saying I'm
> >> against this patch, just pointing out since the commit message is a
> >> bit misleading.
> >
> > As I suggested this patch, I feel I must comment.
> >
> > My order of preference would be:
> >
> >  reset-gpio
> >  reset-gpios
> >  rst-gpio
> >  rst-gpios
> >
> > This current patch is No2, so it's okay to stay IMHO.
> >
> 
> If the property is being changed anyways, why not going with No1 then?
> 
> As I said, I'm not against the patch but I think the commit message
> has to be reworded since implies that the problem is that the -gpio
> sufix is being used instead of -gpios. But since both are supported by
> the GPIO subsystem, the commit should mention that "reset" is more
> clear and easier to read than "rst" or something along those lines.
> 
> BTW, I just posted a patch for the GPIO doc to mention that -gpio is
> also supported:
> 
> https://patchwork.kernel.org/patch/7103761/

Noted.  Thanks for the heads-up.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux