Re: [linux-sunxi] Re: [PATCH 4/6] ARM: dts: sun7i: Enable USB DRC on pcDuino 3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Aug 20, 2015 at 09:36:33AM +0200, Hans de Goede wrote:
> Hi,
> 
> On 08/20/2015 08:45 AM, Maxime Ripard wrote:
> >On Fri, Aug 14, 2015 at 04:44:35PM +0200, Hans de Goede wrote:
> >>From: Jelle van der Waa <jelle@xxxxxxxx>
> >>
> >>Enable the otg/drc usb controller on the pcDuino 3.
> >>
> >>Note this board has the otg-vbus connected directly to the 5v-dcc of
> >>the board, so there is no vbus0 regulator, nor vbus0-det.
> >
> >Can it do OTG then?
> 
> Yes.
> 
> >If VBUS is tied to the 5v, there's no way for the
> >board to shut it down when acting as peripheral, right?
> 
> Correct, the idea is to power it over otg when using it
> as a peripheral, or at least power it from a usb port of
> the machine for which it is a peripheral. Note that the
> original cubieboard (both A10 and A20 versions) have the
> same issue.

Hmmm, I see. I'll queue your patch then.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux