Document the new compatible for Hisilicon Hi6220 mailbox driver. Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx> --- .../bindings/mailbox/hisilicon,hi6220-mailbox.txt | 57 ++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt new file mode 100644 index 0000000..3dfb0b0 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt @@ -0,0 +1,57 @@ +Hisilicon Hi6220 Mailbox Driver +=============================== + +Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel +is unidirectional with a maximum message size of 8 words. I/O is +performed using register access (there is no DMA) and the cell +raises an interrupt when messages are received. + +Mailbox Device Node: +==================== + +Required properties: +-------------------- +- compatible: Shall be "hisilicon,hi6220-mbox" +- reg: Contains the mailbox register address range (base + address and length); the first item is for IPC + registers, the second item is shared buffer for + slots. +- #mbox-cells Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Should be 1. +- interrupts: Contains the interrupt information for the mailbox + device. The format is dependent on which interrupt + controller the SoCs use. + +Example: +-------- + + mailbox: mailbox@F7510000 { + #mbox-cells = <1>; + compatible = "hisilicon,hi6220-mbox"; + reg = <0x0 0xF7510000 0x0 0x1000>, /* IPC_S */ + <0x0 0x06DFF800 0x0 0x0800>; /* Mailbox */ + interrupt-parent = <&gic>; + interrupts = <0 94 4>; + }; + + +Mailbox client +=============== + +"mboxes" and the optional "mbox-names" (please see +Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value +of the mboxes property should contain a phandle to the mailbox controller +device node and second argument is the channel index. It must be 0 (hardware +support only one channel). The equivalent "mbox-names" property value can be +used to give a name to the communication channel to be used by the client user. + +Example: +-------- + + stub_clock: stub_clock { + compatible = "hisilicon,hi6220-stub-clk"; + hisilicon,hi6220-clk-sram = <&sram>; + #clock-cells = <1>; + mbox-names = "mbox-tx"; + mboxes = <&mailbox 1>; + }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html