On Tue, Aug 18, 2015 at 10:48:56AM -0500, Adrian Alonso wrote: > - Add shared input select register support > - imx7d has two iomux controllers iomuxc and iomuxc-lpsr > which share select_input register for daisy chain settings > > Signed-off-by: Adrian Alonso <aalonso@xxxxxxxxxxxxx> > --- > drivers/pinctrl/freescale/pinctrl-imx.c | 28 +++++++++++++++++++++++++++- > drivers/pinctrl/freescale/pinctrl-imx.h | 1 + > 2 files changed, 28 insertions(+), 1 deletion(-) > > diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c > index 0440b0b..1009b52 100644 > --- a/drivers/pinctrl/freescale/pinctrl-imx.c > +++ b/drivers/pinctrl/freescale/pinctrl-imx.c > @@ -18,6 +18,7 @@ > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_device.h> > +#include <linux/of_address.h> > #include <linux/pinctrl/machine.h> > #include <linux/pinctrl/pinconf.h> > #include <linux/pinctrl/pinctrl.h> > @@ -39,6 +40,7 @@ struct imx_pinctrl { > struct device *dev; > struct pinctrl_dev *pctl; > void __iomem *base; > + void __iomem *input_sel_base; > const struct imx_pinctrl_soc_info *info; > }; > > @@ -254,7 +256,12 @@ static int imx_pmx_set(struct pinctrl_dev *pctldev, unsigned selector, > * Regular select input register can never be at offset > * 0, and we only print register value for regular case. > */ > - writel(pin->input_val, ipctl->base + pin->input_reg); > + if (info->flags & SHARE_INPUT_SELECT_REG) > + writel(pin->input_val, ipctl->input_sel_base + > + pin->input_reg); > + else > + writel(pin->input_val, ipctl->base + > + pin->input_reg); > dev_dbg(ipctl->dev, > "==>select_input: offset 0x%x val 0x%x\n", > pin->input_reg, pin->input_val); > @@ -691,6 +698,8 @@ static int imx_pinctrl_probe_dt(struct platform_device *pdev, > int imx_pinctrl_probe(struct platform_device *pdev, > struct imx_pinctrl_soc_info *info) > { > + struct device_node *dev_np = pdev->dev.of_node; > + struct device_node *np; > struct imx_pinctrl *ipctl; > struct resource *res; > int ret; > @@ -716,6 +725,23 @@ int imx_pinctrl_probe(struct platform_device *pdev, > if (IS_ERR(ipctl->base)) > return PTR_ERR(ipctl->base); > > + if (info->flags & SHARE_INPUT_SELECT_REG) { > + np = of_get_child_by_name(dev_np->parent, "iomuxc"); Isn't there a better way to get this node than searching through the childs of the parent which may magically have the right 'iomuxc' node there and using the register range of that node? Does the other iomuxc node uses its register space as well? Regards, Markus > + if (np) { > + ipctl->input_sel_base = of_iomap(np, 0); > + if (IS_ERR(ipctl->input_sel_base)) { > + of_node_put(np); > + dev_err(&pdev->dev, > + "iomuxc base address not found\n"); > + return PTR_ERR(ipctl->input_sel_base); > + } > + } else { > + dev_err(&pdev->dev, "iomuxc device node not foud\n"); > + return -EINVAL; > + } > + of_node_put(np); > + } > + > imx_pinctrl_desc.name = dev_name(&pdev->dev); > imx_pinctrl_desc.pins = info->pins; > imx_pinctrl_desc.npins = info->npins; > diff --git a/drivers/pinctrl/freescale/pinctrl-imx.h b/drivers/pinctrl/freescale/pinctrl-imx.h > index d22b8f6..85c701b 100644 > --- a/drivers/pinctrl/freescale/pinctrl-imx.h > +++ b/drivers/pinctrl/freescale/pinctrl-imx.h > @@ -85,6 +85,7 @@ struct imx_pinctrl_soc_info { > > #define SHARE_MUX_CONF_REG 0x1 > #define ZERO_OFFSET_VALID 0x2 > +#define SHARE_INPUT_SELECT_REG 0x4 > > #define NO_MUX 0x0 > #define NO_PAD 0x0 > -- > 2.1.4 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: Digital signature