Re: [1/4] clk: samsung: exynos3250: Add UART2 clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Chanwoo,

Thanks for this patch. Similar patch[1] was posted long back, and there were some concern from your side, if you think those concerns are fixed, then my patch [1] are still valid and can be taken. If it needs to be rebase I am happy to do that.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-September/291239.html


Thanks,
Pankaj Dubey
On Tuesday 11 August 2015 09:16 AM, Chanwoo Choi wrote:
This patch add the UART2 clocks (mux, divider, gate) of Exynos3250 SoC.

Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Cc: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>

---
drivers/clk/samsung/clk-exynos3250.c   | 6 ++++++
  include/dt-bindings/clock/exynos3250.h | 6 +++++-
  2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
index 538de66a759e..2105863a3ace 100644
--- a/drivers/clk/samsung/clk-exynos3250.c
+++ b/drivers/clk/samsung/clk-exynos3250.c
@@ -307,6 +307,7 @@ static struct samsung_mux_clock mux_clks[] __initdata = {
  	MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 4),

  	/* SRC_PERIL0 */
+	MUX(CLK_MOUT_UART2, "mout_uart2", group_sclk_p, SRC_PERIL0, 8, 4),
  	MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
  	MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),

@@ -389,6 +390,7 @@ static struct samsung_div_clock div_clks[] __initdata = {
  	DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),

  	/* DIV_PERIL0 */
+	DIV(CLK_DIV_UART2, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
  	DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
  	DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),

@@ -551,6 +553,9 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
  		GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
  	GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
  		GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
+
+	GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
+		GATE_SCLK_PERIL, 2, CLK_SET_RATE_PARENT, 0),
  	GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
  		GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
  	GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
@@ -648,6 +653,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
  	GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
  	GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
  	GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
+	GATE(CLK_UART2, "uart2", "div_aclk_100", GATE_IP_PERIL, 2, 0, 0),
  	GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
  	GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
  };
diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h
index aab088d30199..89a7d97b002c 100644
--- a/include/dt-bindings/clock/exynos3250.h
+++ b/include/dt-bindings/clock/exynos3250.h
@@ -78,6 +78,7 @@
  #define CLK_MOUT_CORE			58
  #define CLK_MOUT_APLL			59
  #define CLK_MOUT_ACLK_266_SUB		60
+#define CLK_MOUT_UART2			61

  /* Dividers */
  #define CLK_DIV_GPL			64
@@ -126,6 +127,7 @@
  #define CLK_DIV_CORE			107
  #define CLK_DIV_HPM			108
  #define CLK_DIV_COPY			109
+#define CLK_DIV_UART2			110

  /* Gates */
  #define CLK_ASYNC_G3D			128
@@ -222,6 +224,7 @@
  #define CLK_BLOCK_MFC			219
  #define CLK_BLOCK_CAM			220
  #define CLK_SMIES			221
+#define CLK_UART2			222

  /* Special clocks */
  #define CLK_SCLK_JPEG			224
@@ -248,12 +251,13 @@
  #define CLK_SCLK_SPI0			245
  #define CLK_SCLK_UART1			246
  #define CLK_SCLK_UART0			247
+#define CLK_SCLK_UART2			248

  /*
   * Total number of clocks of main CMU.
   * NOTE: Must be equal to last clock ID increased by one.
   */
-#define CLK_NR_CLKS			248
+#define CLK_NR_CLKS			249

  /*
   * CMU DMC

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux