Re: [PATCH v2 10/10] arm64: dts: Create SoC thermal zone for Juno

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Aug 03, 2015 at 04:22:58PM +0100, Punit Agrawal wrote:
> Setup a thermal zone driven by the SoC temperature sensor on Juno
> r0. Create passive trip points and bind them to cpufreq cooling
> devices that support the power extensions.

Hi Punit,

> 
> Signed-off-by: Punit Agrawal <punit.agrawal@xxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Liviu Dudau <liviu.dudau@xxxxxxx>
> Cc: Sudeep Holla <sudeep.holla@xxxxxxx>
> ---
>  arch/arm64/boot/dts/arm/juno.dts | 50 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
> index d2e67f3..664961c 100644
> --- a/arch/arm64/boot/dts/arm/juno.dts
> +++ b/arch/arm64/boot/dts/arm/juno.dts
> @@ -9,6 +9,7 @@
>  /dts-v1/;
>  
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/thermal/thermal.h>
>  
>  / {
>  	model = "ARM Juno development board (r0)";
> @@ -90,6 +91,8 @@
>  			next-level-cache = <&A57_L2>;
>  			clocks = <&scpi_dvfs 0>;
>  			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> +			#cooling-cells = <2>;
> +			dynamic-power-coefficient = <530>;

The Documentation/devicetree/bindings/thermal/thermal.txt document describes two additional
required properties, cooling-min-state and cooling-max-state which are missing here.

>  		};
>  
>  		A57_1: cpu@1 {
> @@ -100,6 +103,8 @@
>  			next-level-cache = <&A57_L2>;
>  			clocks = <&scpi_dvfs 0>;
>  			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> +			#cooling-cells = <2>;
> +			dynamic-power-coefficient = <530>;
>  		};
>  
>  		A53_0: cpu@100 {
> @@ -110,6 +115,8 @@
>  			next-level-cache = <&A53_L2>;
>  			clocks = <&scpi_dvfs 1>;
>  			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> +			#cooling-cells = <2>;
> +			dynamic-power-coefficient = <140>;
>  		};
>  
>  		A53_1: cpu@101 {
> @@ -120,6 +127,8 @@
>  			next-level-cache = <&A53_L2>;
>  			clocks = <&scpi_dvfs 1>;
>  			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> +			#cooling-cells = <2>;
> +			dynamic-power-coefficient = <140>;
>  		};
>  
>  		A53_2: cpu@102 {
> @@ -130,6 +139,8 @@
>  			next-level-cache = <&A53_L2>;
>  			clocks = <&scpi_dvfs 1>;
>  			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> +			#cooling-cells = <2>;
> +			dynamic-power-coefficient = <140>;
>  		};
>  
>  		A53_3: cpu@103 {
> @@ -140,6 +151,8 @@
>  			next-level-cache = <&A53_L2>;
>  			clocks = <&scpi_dvfs 1>;
>  			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> +			#cooling-cells = <2>;
> +			dynamic-power-coefficient = <140>;
>  		};
>  
>  		A57_L2: l2-cache0 {
> @@ -167,5 +180,42 @@
>  				     <&A53_3>;
>  	};
>  
> +	thermal-zones {
> +		soc_thermal {
> +			polling-delay = <1000>;
> +			polling-delay-passive = <100>;
> +			sustainable-power = <2500>;
> +
> +			thermal-sensors = <&scpi_sensors0 3>;
> +
> +			trips {
> +				threshold: trip-point@0 {

You also need a reg= property if you have the @index thing.

Best regards,
Liviu

> +					temperature = <55000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +				target: trip-point@1 {
> +					temperature = <65000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&target>;
> +					cooling-device = <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +					contribution = <2048>;
> +				};
> +				map1 {
> +					trip = <&target>;
> +					cooling-device = <&A57_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +					contribution = <1024>;
> +				};
> +
> +			};
> +		};
> +	};
> +
>  	#include "juno-base.dtsi"
>  };
> -- 
> 2.1.4
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux