Re: [PATCH v4 2/2] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, 12 Aug 2015, Hans de Goede wrote:

> Hi,
> 
> On 12-08-15 11:29, Lee Jones wrote:
> >On Wed, 12 Aug 2015, Hans de Goede wrote:
> >
> >>Hi,
> >>
> >>On 11-08-15 16:18, Lee Jones wrote:
> >>>On Sat, 08 Aug 2015, Hans de Goede wrote:
> >>>
> >>>>Add a cell for the usb power_supply part of the axp20x PMICs.
> >>>>
> >>>>Note that this cell is only for the usb power_supply part and not the
> >>>>ac-power / battery-charger / rtc-backup-bat-charger bits.
> >>>>
> >>>>Depending on the board each of those must be enabled / disabled separately
> >>>>in devicetree as most boards do not use all 4. So in dt each one needs its
> >>>>own child-node of the axp20x node. Another reason for using separate child
> >>>>nodes for each is so that other devicetree nodes can have a power-supply
> >>>>property with a phandle referencing a node representing a single
> >>>>power-supply.
> >>>>
> >>>>The decision to use a separate devicetree node for each is reflected on
> >>>>the kernel side by each getting its own mfd-cell / platform_device and
> >>>>platform-driver.
> >>>>
> >>>>Note this commit also makes some whitespace changes to the intialization
> >>>>of existing cells in axp20x_cells, these are pure whitespace changes,
> >>>>functionally nothing changes.
> >>>>
> >>>>Cc: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
> >>>>Signed-off-by: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx>
> >>>>Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> >>>>Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> >>>>Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
> >>>>---
> >>>>Changes in v2:
> >>>>-Use DEFINE_RES_IRQ_NAMED
> >>>>-Change indentation of axp20x_cells initializers to avoid line wrapping
> >>>>Changes in v3:
> >>>>-Improve commit message
> >>>>-Add Bruno's S-o-b
> >>>>---
> >>>>  drivers/mfd/axp20x.c | 20 ++++++++++++++++----
> >>>>  1 file changed, 16 insertions(+), 4 deletions(-)
> >>>
> >>>Applied, thanks.
> >>
> >>Great, but I'm not seeing this in:
> >>
> >>https://git.kernel.org/cgit/linux/kernel/git/lee/mfd.git/log/?h=for-mfd-next
> >
> >Well it does usually take me a day or two push my local branch out,
> >however in this case I had actually dropped a ball somewhere.  I've
> >been through my backlog of 'applied' patches and these two are the
> >only ones I failed to pick.  I have now, re-picked, re-applied and
> >pushed the branch out.  Let me know if something is still not right.
> 
> Looks good now, thanks.

You're welcome.

> >Sorry for the inconvenience.
> 
> No problem, thanks for all the great work you are doing on maintaining
> the mfd subsys.

Thanks. :)

I should print and frame this, to look at when I think about not doing
it anymore.

> >>>>diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> >>>>index d9f2f96..3f576b7 100644
> >>>>--- a/drivers/mfd/axp20x.c
> >>>>+++ b/drivers/mfd/axp20x.c
> >>>>@@ -140,6 +140,13 @@ static struct resource axp20x_pek_resources[] = {
> >>>>  	},
> >>>>  };
> >>>>
> >>>>+static struct resource axp20x_usb_power_supply_resources[] = {
> >>>>+	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
> >>>>+	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
> >>>>+	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_VALID, "VBUS_VALID"),
> >>>>+	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
> >>>>+};
> >>>>+
> >>>>  static struct resource axp22x_pek_resources[] = {
> >>>>  	{
> >>>>  		.name   = "PEK_DBR",
> >>>>@@ -432,11 +439,16 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
> >>>>
> >>>>  static struct mfd_cell axp20x_cells[] = {
> >>>>  	{
> >>>>-		.name			= "axp20x-pek",
> >>>>-		.num_resources		= ARRAY_SIZE(axp20x_pek_resources),
> >>>>-		.resources		= axp20x_pek_resources,
> >>>>+		.name		= "axp20x-pek",
> >>>>+		.num_resources	= ARRAY_SIZE(axp20x_pek_resources),
> >>>>+		.resources	= axp20x_pek_resources,
> >>>>  	}, {
> >>>>-		.name			= "axp20x-regulator",
> >>>>+		.name		= "axp20x-regulator",
> >>>>+	}, {
> >>>>+		.name		= "axp20x-usb-power-supply",
> >>>>+		.of_compatible	= "x-powers,axp202-usb-power-supply",
> >>>>+		.num_resources	= ARRAY_SIZE(axp20x_usb_power_supply_resources),
> >>>>+		.resources	= axp20x_usb_power_supply_resources,
> >>>>  	},
> >>>>  };
> >>>>
> >>>
> >

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux