Define the SILK board dependent part of the SDHI1 (connected to micro-SD slot)
device nodes along with the necessary voltage regulators.
Based on the original patch by Vladimir Barinov
<vladimir.barinov@xxxxxxxxxxxxxxxxxx>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
This patch is against 'renesas-devel-20150810-v4.2-rc6' tag of Simon Horman's
'renesas.git' repo plus the R8A7794/SILK QSPI patches just re-posted. It needs
the R8A7794 GPIO patches in order to compile.
Changes in version 2:
- removed not working SDHI0 stuff, renamed the patch;
- replaced SDHI1's "wp-gpios" property with "disable-wp".
arch/arm/boot/dts/r8a7794-silk.dts | 40 +++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
+++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "SILK";
@@ -39,6 +40,29 @@
regulator-boot-on;
regulator-always-on;
};
+ vcc_sdhi1: regulator@3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI1 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi1: regulator@4 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
};
&extal_clk {
@@ -66,6 +90,11 @@
renesas,function = "mmc";
};
+ sdhi1_pins: sd1 {
+ renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+ renesas,function = "sdhi1";
+ };
+
qspi_pins: spi0 {
renesas,groups = "qspi_ctrl", "qspi_data4";
renesas,function = "qspi";
@@ -106,6 +135,17 @@
status = "okay";
};
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi1>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ status = "okay";
+};
+
&qspi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
