Re: [PATCH v2] backlight: pm8941-wled: Move PM8941 WLED driver to backlight

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, 21 Jul 2015, Bjorn Andersson wrote:

> The Qualcomm PM8941 WLED block is used for backlight and should therefor
> be in the backlight framework and not in the LED framework. This moves
> the driver and adapts to the backlight api instead.
> 
> Acked-by: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
> Tested-by: Rob Clark <robdclark@xxxxxxxxx>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
> ---
>  .../backlight/pm8941-wled.txt}                     |  5 +-
>  drivers/leds/Kconfig                               |  8 ---
>  drivers/leds/Makefile                              |  1 -
>  drivers/video/backlight/Kconfig                    |  7 +++
>  drivers/video/backlight/Makefile                   |  1 +
>  .../backlight/pm8941-wled.c}                       | 60 ++++++++++------------
>  6 files changed, 35 insertions(+), 47 deletions(-)
>  rename Documentation/devicetree/bindings/{leds/leds-pm8941-wled.txt => video/backlight/pm8941-wled.txt} (84%)
>  rename drivers/{leds/leds-pm8941-wled.c => video/backlight/pm8941-wled.c} (90%)

Applied with Jingoo's Ack, thanks.

> diff --git a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt b/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt
> similarity index 84%
> rename from Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
> rename to Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt
> index a85a964d61f5..424f8444a6cd 100644
> --- a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
> +++ b/Documentation/devicetree/bindings/video/backlight/pm8941-wled.txt
> @@ -5,10 +5,7 @@ Required properties:
>  - reg: slave address
>  
>  Optional properties:
> -- label: The label for this led
> -  See Documentation/devicetree/bindings/leds/common.txt
> -- linux,default-trigger: Default trigger assigned to the LED
> -  See Documentation/devicetree/bindings/leds/common.txt
> +- label: The name of the backlight device
>  - qcom,cs-out: bool; enable current sink output
>  - qcom,cabc: bool; enable content adaptive backlight control
>  - qcom,ext-gen: bool; use externally generated modulator signal to dim
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 9ad35f72ab4c..b8d4b965ca2a 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -578,14 +578,6 @@ config LEDS_VERSATILE
>  	  This option enabled support for the LEDs on the ARM Versatile
>  	  and RealView boards. Say Y to enabled these.
>  
> -config LEDS_PM8941_WLED
> -	tristate "LED support for the Qualcomm PM8941 WLED block"
> -	depends on LEDS_CLASS
> -	select REGMAP
> -	help
> -	  This option enables support for the 'White' LED block
> -	  on Qualcomm PM8941 PMICs.
> -
>  comment "LED Triggers"
>  source "drivers/leds/trigger/Kconfig"
>  
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 8d6a24a2f513..abe96d960ebe 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -63,7 +63,6 @@ obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
>  obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
>  obj-$(CONFIG_LEDS_VERSATILE)		+= leds-versatile.o
>  obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
> -obj-$(CONFIG_LEDS_PM8941_WLED)		+= leds-pm8941-wled.o
>  obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
>  
>  # LED SPI Drivers
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 0505b796d743..5ffa4b4e26c0 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -299,6 +299,13 @@ config BACKLIGHT_TOSA
>  	  If you have an Sharp SL-6000 Zaurus say Y to enable a driver
>  	  for its backlight
>  
> +config BACKLIGHT_PM8941_WLED
> +	tristate "Qualcomm PM8941 WLED Driver"
> +	select REGMAP
> +	help
> +	  If you have the Qualcomm PM8941, say Y to enable a driver for the
> +	  WLED block.
> +
>  config BACKLIGHT_SAHARA
>  	tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
>  	depends on X86
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index d67073f9d421..16ec534cff30 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -48,6 +48,7 @@ obj-$(CONFIG_BACKLIGHT_OMAP1)		+= omap1_bl.o
>  obj-$(CONFIG_BACKLIGHT_OT200)		+= ot200_bl.o
>  obj-$(CONFIG_BACKLIGHT_PANDORA)		+= pandora_bl.o
>  obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
> +obj-$(CONFIG_BACKLIGHT_PM8941_WLED)	+= pm8941-wled.o
>  obj-$(CONFIG_BACKLIGHT_PWM)		+= pwm_bl.o
>  obj-$(CONFIG_BACKLIGHT_SAHARA)		+= kb3886_bl.o
>  obj-$(CONFIG_BACKLIGHT_SKY81452)	+= sky81452-backlight.o
> diff --git a/drivers/leds/leds-pm8941-wled.c b/drivers/video/backlight/pm8941-wled.c
> similarity index 90%
> rename from drivers/leds/leds-pm8941-wled.c
> rename to drivers/video/backlight/pm8941-wled.c
> index bf64a593fbf1..c704c3236034 100644
> --- a/drivers/leds/leds-pm8941-wled.c
> +++ b/drivers/video/backlight/pm8941-wled.c
> @@ -11,7 +11,7 @@
>   */
>  
>  #include <linux/kernel.h>
> -#include <linux/leds.h>
> +#include <linux/backlight.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_device.h>
> @@ -76,30 +76,29 @@ struct pm8941_wled_config {
>  };
>  
>  struct pm8941_wled {
> +	const char *name;
>  	struct regmap *regmap;
>  	u16 addr;
>  
> -	struct led_classdev cdev;
> -
>  	struct pm8941_wled_config cfg;
>  };
>  
> -static int pm8941_wled_set(struct led_classdev *cdev,
> -			   enum led_brightness value)
> +static int pm8941_wled_update_status(struct backlight_device *bl)
>  {
> -	struct pm8941_wled *wled;
> +	struct pm8941_wled *wled = bl_get_data(bl);
> +	u16 val = bl->props.brightness;
>  	u8 ctrl = 0;
> -	u16 val;
>  	int rc;
>  	int i;
>  
> -	wled = container_of(cdev, struct pm8941_wled, cdev);
> +	if (bl->props.power != FB_BLANK_UNBLANK ||
> +	    bl->props.fb_blank != FB_BLANK_UNBLANK ||
> +	    bl->props.state & BL_CORE_FBBLANK)
> +		val = 0;
>  
> -	if (value != 0)
> +	if (val != 0)
>  		ctrl = PM8941_WLED_REG_MOD_EN_BIT;
>  
> -	val = value * PM8941_WLED_REG_VAL_MAX / LED_FULL;
> -
>  	rc = regmap_update_bits(wled->regmap,
>  			wled->addr + PM8941_WLED_REG_MOD_EN,
>  			PM8941_WLED_REG_MOD_EN_MASK, ctrl);
> @@ -128,16 +127,6 @@ static int pm8941_wled_set(struct led_classdev *cdev,
>  	return rc;
>  }
>  
> -static void pm8941_wled_set_brightness(struct led_classdev *cdev,
> -				       enum led_brightness value)
> -{
> -	if (pm8941_wled_set(cdev, value)) {
> -		dev_err(cdev->dev, "Unable to set brightness\n");
> -		return;
> -	}
> -	cdev->brightness = value;
> -}
> -
>  static int pm8941_wled_setup(struct pm8941_wled *wled)
>  {
>  	int rc;
> @@ -336,12 +325,9 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev)
>  	}
>  	wled->addr = val;
>  
> -	rc = of_property_read_string(dev->of_node, "label", &wled->cdev.name);
> +	rc = of_property_read_string(dev->of_node, "label", &wled->name);
>  	if (rc)
> -		wled->cdev.name = dev->of_node->name;
> -
> -	wled->cdev.default_trigger = of_get_property(dev->of_node,
> -			"linux,default-trigger", NULL);
> +		wled->name = dev->of_node->name;
>  
>  	*cfg = pm8941_wled_config_defaults;
>  	for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) {
> @@ -377,8 +363,14 @@ static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev)
>  	return 0;
>  }
>  
> +static const struct backlight_ops pm8941_wled_ops = {
> +	.update_status = pm8941_wled_update_status,
> +};
> +
>  static int pm8941_wled_probe(struct platform_device *pdev)
>  {
> +	struct backlight_properties props;
> +	struct backlight_device *bl;
>  	struct pm8941_wled *wled;
>  	struct regmap *regmap;
>  	int rc;
> @@ -403,13 +395,14 @@ static int pm8941_wled_probe(struct platform_device *pdev)
>  	if (rc)
>  		return rc;
>  
> -	wled->cdev.brightness_set = pm8941_wled_set_brightness;
> -
> -	rc = devm_led_classdev_register(&pdev->dev, &wled->cdev);
> -	if (rc)
> -		return rc;
> -
> -	platform_set_drvdata(pdev, wled);
> +	memset(&props, 0, sizeof(struct backlight_properties));
> +	props.type = BACKLIGHT_RAW;
> +	props.max_brightness = PM8941_WLED_REG_VAL_MAX;
> +	bl = devm_backlight_device_register(&pdev->dev, wled->name,
> +					    &pdev->dev, wled,
> +					    &pm8941_wled_ops, &props);
> +	if (IS_ERR(bl))
> +		return PTR_ERR(bl);
>  
>  	return 0;
>  };
> @@ -432,4 +425,3 @@ module_platform_driver(pm8941_wled_driver);
>  
>  MODULE_DESCRIPTION("pm8941 wled driver");
>  MODULE_LICENSE("GPL v2");
> -MODULE_ALIAS("platform:pm8941-wled");

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux