Raspberry Pi uses a DWC2 USB controller and a SMSC USB Ethernet adaptor.
Driver model support for these was recently merged.
This series does the following:
- Move Raspberry Pi to use device tree control (u-boot-dtb.bin instead of
u-boot.bin)
- Remove GPIO platform data (now uses device tree)
- Remove serial platform data (now uses device tree)
- Enable CONFIG_DM_ETH and CONFIG_DM_USB on Raspberry Pi
With Ethernet active the device list looks something like this:
U-Boot> dm tree
Class Probed Name
----------------------------------------
root [ + ] root_driver
simple_bus [ + ] |-- soc
gpio [ ] | |-- gpio@7e200000
serial [ + ] | |-- uart@7e201000
usb [ + ] | `-- usb@7e980000
usb_hub [ + ] | `-- usb_hub
usb_hub [ + ] | `-- usb_hub
eth [ + ] | `-- smsc95xx_eth
simple_bus [ ] `-- clocks
Changes in v3:
- Drop applied patches from series
- Drop patch to introduce usbethaddr for driver model
- Rename binding file to pl01x.txt
Changes in v2:
- Add support for Raspberry Pi 2
Simon Glass (11):
dm: serial: Update binding for PL01x serial UART
arm: rpi: Define CONFIG_TFTP_TSIZE to show tftp size info
arm: rpi: Bring in kernel device tree files
arm: rpi: Device tree modifications for U-Boot
arm: rpi: Add device tree files for Raspberry Pi 2
arm: rpi: Enable device tree control for Rasberry Pi
arm: rpi: Enable device tree control for Rasberry Pi 2
arm: rpi: Drop the UART console platform data
arm: rpi: Drop the GPIO platform data
arm: rpi: Move to driver model for USB
arm: rpi: Use driver model for Ethernet
arch/arm/dts/Makefile | 3 +
arch/arm/dts/bcm2835-rpi-b.dts | 24 ++++
arch/arm/dts/bcm2835.dtsi | 35 +++++
arch/arm/dts/bcm2836-rpi-2-b.dts | 30 +++++
arch/arm/dts/bcm2836.dtsi | 42 ++++++
arch/arm/dts/bcm283x-common.dtsi | 157 ++++++++++++++++++++++
arch/arm/dts/bcm283x-rpi.dtsi | 49 +++++++
arch/arm/dts/stv0991.dts | 2 +-
arch/arm/mach-bcm283x/include/mach/gpio.h | 5 -
board/raspberrypi/rpi/rpi.c | 24 ----
configs/rpi_2_defconfig | 6 +
configs/rpi_defconfig | 6 +
doc/device-tree-bindings/arm/bcm/brcm,bcm2835.txt | 8 ++
doc/device-tree-bindings/arm/bcm/brcm,bcm2836.txt | 10 ++
doc/device-tree-bindings/serial/pl01x.txt | 55 +++++++-
drivers/gpio/bcm2835_gpio.c | 20 +++
drivers/serial/serial_pl01x.c | 6 +-
include/configs/rpi-common.h | 6 +-
include/dt-bindings/pinctrl/bcm2835.h | 27 ++++
19 files changed, 474 insertions(+), 41 deletions(-)
create mode 100644 arch/arm/dts/bcm2835-rpi-b.dts
create mode 100644 arch/arm/dts/bcm2835.dtsi
create mode 100644 arch/arm/dts/bcm2836-rpi-2-b.dts
create mode 100644 arch/arm/dts/bcm2836.dtsi
create mode 100644 arch/arm/dts/bcm283x-common.dtsi
create mode 100644 arch/arm/dts/bcm283x-rpi.dtsi
create mode 100644 doc/device-tree-bindings/arm/bcm/brcm,bcm2835.txt
create mode 100644 doc/device-tree-bindings/arm/bcm/brcm,bcm2836.txt
create mode 100644 include/dt-bindings/pinctrl/bcm2835.h
--
2.5.0.rc2.392.g76e840b
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
