[PATCH v6 24/42] powerpc/powernv: Supports slot ID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




PowerNV platform is running on top of skiboot firmware, which has
changes to support PCI slots. PCI slots are identified by PHB's
OPAL ID (PHB slot) or combo of that and PCI slot ID. The patch
changes argument names of opal_pci_reset() and opal_pci_poll()
to reflect the firmware's change. pnv_eeh_phb_poll() is also
renamed to pnv_eeh_poll() to reflect the firmware's change.

Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
---
 arch/powerpc/include/asm/opal.h              | 4 ++--
 arch/powerpc/platforms/powernv/eeh-powernv.c | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index a091c27..bbb3aa6 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -129,7 +129,7 @@ int64_t opal_pci_map_pe_dma_window(uint64_t phb_id, uint16_t pe_number, uint16_t
 int64_t opal_pci_map_pe_dma_window_real(uint64_t phb_id, uint16_t pe_number,
 					uint16_t dma_window_number, uint64_t pci_start_addr,
 					uint64_t pci_mem_size);
-int64_t opal_pci_reset(uint64_t phb_id, uint8_t reset_scope, uint8_t assert_state);
+int64_t opal_pci_reset(uint64_t id, uint8_t reset_scope, uint8_t assert_state);
 
 int64_t opal_pci_get_hub_diag_data(uint64_t hub_id, void *diag_buffer,
 				   uint64_t diag_buffer_len);
@@ -146,7 +146,7 @@ int64_t opal_get_dpo_status(__be64 *dpo_timeout);
 int64_t opal_set_system_attention_led(uint8_t led_action);
 int64_t opal_pci_next_error(uint64_t phb_id, __be64 *first_frozen_pe,
 			    __be16 *pci_error_type, __be16 *severity);
-int64_t opal_pci_poll(uint64_t phb_id);
+int64_t opal_pci_poll(uint64_t id, uint8_t *val);
 int64_t opal_return_cpu(void);
 int64_t opal_check_token(uint64_t token);
 int64_t opal_reinit_cpus(uint64_t flags);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 347b1cf..0350dab 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -745,12 +745,12 @@ static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay)
 	return ret;
 }
 
-static s64 pnv_eeh_phb_poll(struct pnv_phb *phb)
+static s64 pnv_eeh_poll(uint64_t id)
 {
 	s64 rc = OPAL_HARDWARE;
 
 	while (1) {
-		rc = opal_pci_poll(phb->opal_id);
+		rc = opal_pci_poll(id, NULL);
 		if (rc <= 0)
 			break;
 
@@ -790,7 +790,7 @@ int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
 	 * reset followed by hot reset on root bus. So we also
 	 * need the PCI bus settlement delay.
 	 */
-	rc = pnv_eeh_phb_poll(phb);
+	rc = pnv_eeh_poll(phb->opal_id);
 	if (option == EEH_RESET_DEACTIVATE) {
 		if (system_state < SYSTEM_RUNNING)
 			udelay(1000 * EEH_PE_RST_SETTLE_TIME);
@@ -833,7 +833,7 @@ static int pnv_eeh_root_reset(struct pci_controller *hose, int option)
 		goto out;
 
 	/* Poll state of the PHB until the request is done */
-	rc = pnv_eeh_phb_poll(phb);
+	rc = pnv_eeh_poll(phb->opal_id);
 	if (option == EEH_RESET_DEACTIVATE)
 		msleep(EEH_PE_RST_SETTLE_TIME);
 out:
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux