Hello Krzysztof, On 08/03/2015 02:37 PM, Krzysztof Kozlowski wrote: > On Odroid XU3 board (with S2MPS11 PMIC) the PWRHOLD bit in CTRL1 > register must be manually set to 0 before initiating power off sequence. > > One of usual power down methods for Exynos based devices looks like: > 1. PWRHOLD pin of PMIC is connected to PSHOLD of Exynos. > 2. Exynos holds up this pin during system operation. > 3. ACOKB pin of PMIC is pulled up to VBATT and optionally to pin in > other device. > 4. When PWRHOLD/PSHOLD goes low, the PMIC will turn off the power if > ACOKB goes high. > > On Odroid XU3 family the difference is in (3) - the ACOKB is grounded. > This means that PMIC must manually set PWRHOLD field to low and then > wait for signal from Application Processor (the usual change in > PWRHOLD/PSHOLD pin will actually cut off the power). > Is nice to finally have an explanation about why this is needed. > The patch adds respective binding allowing Odroid XU3 device to be > powered off. > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx> > Reported-by: Anand Moon <linux.amoon@xxxxxxxxx> > > --- > > Patch is losely based on patch in Hardkernel repository [0] and previous > work of Anand Moon [1]. > > [0] https://github.com/hardkernel/linux/commit/6897e62ba328bd1c8c095d918101863250cd73e7 > [1] http://www.spinics.net/lists/linux-samsung-soc/msg45959.html > --- > Documentation/devicetree/bindings/mfd/s2mps11.txt | 4 +++ > drivers/mfd/sec-core.c | 31 +++++++++++++++++++++++ > include/linux/mfd/samsung/core.h | 2 ++ > include/linux/mfd/samsung/s2mps11.h | 1 + > 4 files changed, 38 insertions(+) > The patch looks good to me. Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> Best regards, -- Javier Martinez Canillas Open Source Group Samsung Research America -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
