Re: [PATCH 6/7] phy: omap-usb2: Add a new compatible string for USB2 PHY2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 04/08/15 18:20, Kishon Vijay Abraham I wrote:
> The USB2 PHY2 has a different register map compared to USB2 PHY1
> to power on/off the PHY. In order to handle it, add a new
> "compatible" string.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
>  Documentation/devicetree/bindings/phy/ti-phy.txt |    2 ++
>  drivers/phy/phy-omap-usb2.c                      |    9 +++++++++
>  2 files changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
> index 49e5b0c..a061077 100644
> --- a/Documentation/devicetree/bindings/phy/ti-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
> @@ -31,6 +31,8 @@ OMAP USB2 PHY
>  
>  Required properties:
>   - compatible: Should be "ti,omap-usb2"
> +	       Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
> +	       in DRA7x
>   - reg : Address and length of the register set for the device.
>   - #phy-cells: determine the number of cells that should be given in the
>     phandle while referencing this phy.
> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
> index b5c266a..2f7220f 100644
> --- a/drivers/phy/phy-omap-usb2.c
> +++ b/drivers/phy/phy-omap-usb2.c
> @@ -159,6 +159,11 @@ static const struct usb_phy_data dra7x_usb2_data = {
>  	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
>  };
>  
> +static const struct usb_phy_data dra7x_usb2_phy2_data = {
> +	.label = "dra7x_usb2_phy2",
> +	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
> +};
> +
>  static const struct usb_phy_data am437x_usb2_data = {
>  	.label = "am437x_usb2",
>  	.flags =  0,
> @@ -178,6 +183,10 @@ static const struct of_device_id omap_usb2_id_table[] = {
>  		.data = &dra7x_usb2_data,
>  	},
>  	{
> +		.compatible = "ti,dra7x-usb2-phy2",
> +		.data = &dra7x_usb2_phy2_data,

Why is this needed? You can reuse dra7x_usb2_data as is.

> +	},
> +	{
>  		.compatible = "ti,am437x-usb2",
>  		.data = &am437x_usb2_data,
>  	},
> 

cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux