This series is split from [1] to include only the dt patches. This series is basically to deprecate using ctrl-module property and use corresponding syscon properties to program the control module registers. Changes from [1] in PHY patches include *) series created after applying [2] Did basic enumeration testing in the below platforms. *) Tested PCIe, SATA and USB in dra7 *) Tested SATA and USB in omap5 *) Tested USB(dwc3) in am43xx_evm *) Tested USB(musb) in omap4 panda after including [3] All the testing was done after applying [4] [1] -> https://lkml.org/lkml/2015/6/23/189 [2] -> http://www.spinics.net/lists/linux-omap/msg120644.html [3] -> http://permalink.gmane.org/gmane.linux.kernel/2012427 [4] -> http://permalink.gmane.org/gmane.linux.kernel/2012604 Kishon Vijay Abraham I (10): ARM: dts: dra7: Add dt node for PCIe registers in sysctrl space ARM: dts: dra7: Use "syscon-phy-power" instead of "ctrl-module" in SATA PHY node ARM: dts: dra7: Use "syscon-phy-power" and "syscon-pcs" in PCIe PHY node ARM: dts: dra7: Use "ti,dra7x-usb2-phy2" compatible string for USB2 PHY2 ARM: dts: dra7: Use "syscon-phy-power" instead of "ctrl-module" in USB PHY node ARM: dts: am4372: Use "syscon-phy-power" instead of "ctrl-module" in USB PHY node ARM: dts: OMAP5: Use "syscon-phy-power" instead of "ctrl-module" in USB PHY node ARM: dts: OMAP5: Use "syscon-phy-power" instead of "ctrl-module" in SATA PHY node ARM: dts: omap4: Use "syscon-phy-power" instead of "ctrl-module" in USB PHY node ARM: dts: omap4: Use "syscon-otghs" instead of "ctrl-module" in USB node arch/arm/boot/dts/am4372.dtsi | 16 ++-------- arch/arm/boot/dts/dra7.dtsi | 69 ++++++++++------------------------------- arch/arm/boot/dts/omap4.dtsi | 16 ++-------- arch/arm/boot/dts/omap5.dtsi | 26 ++-------------- 4 files changed, 24 insertions(+), 103 deletions(-) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html