Hi, On 31-07-15 16:23, Jonathan Liu wrote:
Hi Hans, On 13/06/2015 10:37 PM, Hans de Goede wrote:The sunxi musb glue needs to know if a host or normal usb cable is plugged in, add extcon support so that the musb glue can monitor the host status. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- Changes in v5: -Split out of the "Add id and vbus detection support" commit -Ported to the new extcon API queued for 4.2 --- drivers/phy/Kconfig | 1 + drivers/phy/phy-sun4i-usb.c | 32 +++++++++++++++++++++++++++++++- 2 files changed, 32 insertions(+), 1 deletion(-) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index a53bd5b..9841780 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -173,6 +173,7 @@ config PHY_SUN4I_USB tristate "Allwinner sunxi SoC USB PHY driver" depends on ARCH_SUNXI && HAS_IOMEM && OF depends on RESET_CONTROLLER + depends on EXTCON select GENERIC_PHY help Enable this to support the transceiver that is part of AllwinnerShould probably add CONFIG_EXTCON=y to arch/arm/configs/sunxi_defconfig so that CONFIG_PHY_SUN4I_USB=y works out of the box.
Right, ChenYu just send out 2 defconfig patches fixing this. Thanks for the heads up. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
