add a DT binding documentation of xHCI host controller for the
MT8173 SoC from Mediatek.
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
.../devicetree/bindings/usb/mt8173-xhci.txt | 51 ++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt
diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
new file mode 100644
index 0000000..364be5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
@@ -0,0 +1,51 @@
+MT65XX xhci
+
+The device node for Mediatek SOC usb3.0 host controller
+
+Required properties:
+ - compatible : Supports "mediatek,mt8173-xhci"
+ - reg : Specifies physical base address and size of the registers,
+ the first one for MAC, the second for IPPC
+ - interrupts : Interrupt mode, number and trigger mode
+ - power-domains : To enable usb's mtcmos
+ - vusb33-supply : Regulator of usb avdd3.3v
+ - clocks : Must support all clocks that xhci needs
+ - clock-names : Should be "sys_mac" for sys and mac clocks, and
+ "wakeup_deb_p0", "wakeup_deb_p1" for wakeup debounce control
+ clocks
+ - phys : List of PHY specifiers (used by generic PHY framework).
+ - phy-names : Must be "usb-phy0", "usb-phy1",.., "usb-phyN", based on
+ the number of PHYs as specified in @phys property.
+ - usb3-lpm-capable : Supports USB3 LPM
+ - mediatek,usb-wakeup : To access usb wakeup control register
+ - mediatek,wakeup-src : 1: Ip sleep wakeup mode; 2: line state wakeup
+ mode; others means don't enable wakeup source of usb
+ - mediatek,u2port-num : The number should not greater than the number
+ of phys
+
+Optional properties:
+ - vbus-supply : Reference to the VBUS regulator;
+
+Example:
+usb: usb@11270000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x11270000 0 0x4000>,
+ <0 0x11280000 0 0x0800>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>,
+ <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB1>;
+ clock-names = "sys_mac",
+ "wakeup_deb_p0",
+ "wakeup_deb_p1";
+ phys = <&u3phy 0>, <&u3phy 1>;
+ phy-names = "usb-phy0", "usb-phy1";
+ vusb33-supply = <&mt6397_vusb_reg>;
+ vbus-supply = <&usb_p1_vbus>;
+ usb3-lpm-capable;
+ mediatek,usb-wakeup = <&pericfg>;
+ mediatek,wakeup-src = <1>;
+ mediatek,u2port-num = <2>;
+ status = "okay";
+};
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
