On Fri, Jul 31, 2015 at 10:59:51AM +0200, Hans de Goede wrote:
> Enable the otg/drc usb controller on the A10s OLinuxIno Micro.
>
> Note the A10s OlinuxIno Micro always has some voltage on its otg power
> pin, even if the usb-vbus0-regulator is disabled, the leaked voltage is
> enough to make vbus-det always report 1, so we do not use vbus-det on
> this board.
>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 30 +++++++++++++++++++++++-
> 1 file changed, 29 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
> index 7b26e17..5eebd21 100644
> --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
> +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
> @@ -196,6 +196,10 @@
> status = "okay";
> };
>
> +&otg_sram {
> + status = "okay";
> +};
> +
> &pio {
> mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
> allwinner,pins = "PG1";
> @@ -224,6 +228,22 @@
> allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> };
> +
> + usb0_vbus_pin_a: usb0_vbus_pin@0 {
> + allwinner,pins = "PG11";
> + };
We usually have this as a reference, instead of doing it through the
full path.
It makes it clearer that we override something, and we don't define a
new node.
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Attachment:
signature.asc
Description: Digital signature
