This is a driver supporting version 4.10a of the Synopsys DWC Ethernet QoS gigabit ethernet controller. The IP has changed significantly compared to the dwmac1000 so a separate driver is justified. The IP is highly configurable at synthesis time. This driver has been developed for a subset of the total available feature set. Currently it supports: * TSO * Checksum offload for RX and TX. * Energy efficient ethernet. * GMII phy interface. * The statistics module. * Single RX and TX queue. Lars Persson (4): dwc_eth_qos: Add Synopsys DWC Ethernet QoS bindings dwc_eth_qos: Add support for Synopsys DWC Ethernet QoS dwc_eth_qos: Add the synopsys folder to the build system. dwc_eth_qos: Add maintainer info .../bindings/net/snps,dwc-qos-ethernet.txt | 75 + MAINTAINERS | 7 + drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/synopsys/Kconfig | 27 + drivers/net/ethernet/synopsys/Makefile | 5 + drivers/net/ethernet/synopsys/dwc_eth_qos.c | 3019 ++++++++++++++++++++ 7 files changed, 3135 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt create mode 100644 drivers/net/ethernet/synopsys/Kconfig create mode 100644 drivers/net/ethernet/synopsys/Makefile create mode 100644 drivers/net/ethernet/synopsys/dwc_eth_qos.c -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
