Hi again, one more thing... Hans de Goede schrieb am 27.07.2015 10:07: > IMHO we should just stick with the standard operating points unless we know > that there are stability issues with them (such as e.g. on the A10 OlinuxIno > Lime). If we stick to the standard operating points, shouldn't we honor their voltages as well? If we set the minimum voltage for dcdc2 to 1.0V (as you did) or 1.05V (as I did), this means that the lowest operating point of 144MHz@0.9V defined in sun7i-a20.dtsi (and with my definition the 312MHz opp as well) will not be available because cpufreq-dt simply ignores operating points that aren't within the set voltage range for that regulator. Regards, Timo -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
