On Thu, 23 Jul 2015, Viresh Kumar wrote:
> Cc'ing few more people who were involved in opp-v2 discussions.
>
> Guys, please take a closer look as this is the first user platform
> that wants to extend opp-v2 bindings with platform specific stuff.
>
> On 21-07-15, 12:33, Lee Jones wrote:
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> > ---
> >
> > Only submitting the binding document as requested by Viresh.
> >
> > v2 => v3:
> > - Using OPP v2
> > - Moved OPPs out of the CPU node into their own one
> > - Using generic 'opp-hz' property
> >
> > .../devicetree/bindings/cpufreq/cpufreq-st.txt | 77 ++++++++++++++++++++++
> > 1 file changed, 77 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
> >
> > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
> > new file mode 100644
> > index 0000000..a478eec
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
>
> These are used by cpufreq, but they aren't really cpufreq bindings.
>
> These are opp bindings and must present at:
> Documentation/devicetree/bindings/power/opp/st.txt and we should move
> opp.txt in that folder as well..
Sure.
> > @@ -0,0 +1,77 @@
> > +Binding for ST's CPUFreq driver
> > +===============================
> > +
> > +Required properties [for working voltage scaling]:
> > +-------------------------------------------------
> > +
> > +Located in CPU's node:
>
> I hope below registers are used to define which OPPs are valid for the
> CPU and so shouldn't these be present under opp node instead of CPU?
Yes, I neglected to change this when I moved the other bindings.
Will change.
> > +- st,syscfg : Phandle to Major number register
> > + First cell: offset to major number
> > +- st,syscfg-eng : Phandle to Minor number and Pcode registers
> > + First cell: offset to process code
> > + Second cell: offset to minor number
> > +
> > +Located in 'cpu0-opp-list' node [to be provided ONLY by the bootloader]:
> > +
> > + - opp{1..N} : Each 'oppX' subnode will contain the following properties:
> > + - opp-hz : CPU frequency [Hz] for this OPP
>
> Not sure if you are required to re define it. In case you want to, the
> please add a link here to the bindings that define it. So that we
> don't think they are newer bindings.
Sure.
> > + - st,avs : List of available voltages [uV] indexed by process code
> > + - st,cuts : Cut version this OPP is suitable for [0xFF means ALL]
> > + - st,substrate : Substrate version this OPP is suitable for [0xFF means ALL]
>
> @Stephen: Any idea if these can be relevant for other platforms and we
> can move them to generic bindings?
>
> > +WARNING: The cpu0-opp-list will be provided by the bootloader. Do not attempt to
> > + artificially synthesise the cpu0-opp-list node or any of its descendants.
> > + They are very platform specific and may damage the hardware if created
> > + incorrectly.
> > +
> > +Required properties [if voltage scaling properties are missing]:
> > +-------------------------------------------------------------------
> > +
> > +Located in CPU's node:
> > +
> > +- operating-points : [See: ../power/opp.txt]
> > +
> > +Example [safe]:
> > +--------------
> > +
> > +cpus {
> > + cpu@0 {
> > + /* kHz uV */
> > + operating-points = <1500000 0
> > + 1200000 0
> > + 800000 0
> > + 500000 0>;
> > + };
> > +};
>
> Why do you want to keep these as well?
We need this as a fall-back, in case anyone boots using a bootloader
which isn't equipped to supply the OPP list. If this happens we can
not use voltage scaling and he best thing we can do is operate using
only frequency scaling.
> > +Example [unsafe]:
> > +----------------
> > +
> > +cpus {
> > + cpu@0 {
> > + st,syscfg = <&syscfg [major_offset]>;
> > + st,syscfg-eng = <&syscfg_eng [pcode_offset] [minor_offset]>;
> > + operating-points-v2 = <&cpu0_opp_list>;
> > + };
> > +};
> > +
> > +/* ############################################################ */
> > +/* # WARNING: Do not attempt to copy/replicate this node, # */
> > +/* # it is only to be supplied by the bootloader !!! # */
> > +/* ############################################################ */
> > +cpu0-opp-list {
> > + compatible = "operating-points-v2-sti";
> > + opp0 {
> > + opp-hz = <1200000000>;
> > + st,avs = <1110 1150 1100 1080 1040 1020 980 930>;
> > + st,substrate = <0xff>;
> > + st,cuts = <0xff>;
> > + };
> > + opp1 {
> > + opp-hz = <1500000000>;
> > + st,avs = <1200 1200 1200 1200 1170 1140 1100 1070>;
> > + st,substrate = <0xff>;
> > + st,cuts = <0x2>;
> > + };
> > +};
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
