On Wed, 22 Jul 2015, Cyrille Pitchen wrote: > This patch documents the DT bindings for the Atmel Flexcom which will be > introduced by sama5d2x SoCs. These bindings will be used by the actual > Flexcom driver to be sent in another patch. > > Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx> > --- > .../devicetree/bindings/mfd/atmel-flexcom.txt | 67 ++++++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt > > diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt > new file mode 100644 > index 000000000000..87a366b95ecf > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt > @@ -0,0 +1,67 @@ > +* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) > + > +The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C > +controller and an USART. Only one function can be used at a time and is chosen > +at boot time according to the device tree. > + > +Required properties: > +- compatible: "atmel,sama5d2-flexcom" > +- reg: shall be the offset/length value for Flexcom dedicated > + I/O registers (without USART, TWI or SPI registers). > +- clocks: shall be the Flexcom peripheral clock from PMC. > +- #address-cells: should be <1> > +- #size-cells: should be <1> > +- ranges: one range for the full I/O register region (including > + USART, TWI and SPI registers). > + > +Required child: > +a single available child for the serial controller to enable. Not a fan of uppercase characters I see. Nevertheless, documentation looks fine and doesn't introduce any new properties, which we like. Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> > +One of the following substrings must be found inside the compatible property of > +this child to enable the right serial controller: > +- "-usart" > +- "-spi" > +- "-i2c" > + > +The reg property of this child should be: > +- <0x200 0x200> for USART > +- <0x400 0x200> for SPI > +- <0x600 0x200> for I2C > + > +The phandle provided by the clocks property of the child is the same as one for > +the Flexcom parent. > + > +Other properties remain unchanged. See documentation of the respective device: > +- ../serial/atmel-usart.txt > +- ../spi/spi_atmel.txt > +- ../i2c/i2c-at91.txt > + > +Example: > + > +flexcom@f8034000 { > + compatible = "atmel,sama5d2-flexcom"; > + reg = <0xf8034000 0x200>; > + clocks = <&flx0_clk>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0xf8034000 0x800>; > + > + spi@f8034400 { > + compatible = "atmel,at91rm9200-spi"; > + reg = <0x400 0x200>; > + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flx0_default>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&flx0_clk>; > + clock-names = "spi_clk"; > + atmel,fifo-size = <32>; > + > + mtd_dataflash@0 { > + compatible = "atmel,at25f512b"; > + reg = <0>; > + spi-max-frequency = <20000000>; > + }; > + }; > +}; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html