TWSI_ILCR & TWSI_IWCR registers are used to adjust clock rate
of standard & fast mode in pxa910/988; so this patch adds these two new
entries to "struct pxa_reg_layout" and "struct pxa_i2c".
As discussed in the previous patch-series, the idea here is to add standard
DT properties for ilcr and iwcr configuration fields.
In case of Master ilcr is used for low/high time and in case of slave mode
of operation iwcr is used for setup/hold time.
Signed-off-by: Jett.Zhou <jtzhou@xxxxxxxxxxx>
Signed-off-by: Yi Zhang <yizhang@xxxxxxxxxxx>
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-pxa.c | 42 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 41 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index abf04f2..8d76197 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -46,12 +46,15 @@ struct pxa_reg_layout {
u32 icr;
u32 isr;
u32 isar;
+ u32 ilcr;
+ u32 iwcr;
};
enum pxa_i2c_types {
REGS_PXA2XX,
REGS_PXA3XX,
REGS_CE4100,
+ REGS_PXA910,
};
/*
@@ -79,12 +82,22 @@ static struct pxa_reg_layout pxa_reg_layout[] = {
.isr = 0x04,
/* no isar register */
},
+ [REGS_PXA910] = {
+ .ibmr = 0x00,
+ .idbr = 0x08,
+ .icr = 0x10,
+ .isr = 0x18,
+ .isar = 0x20,
+ .ilcr = 0x28,
+ .iwcr = 0x30,
+ },
};
static const struct platform_device_id i2c_pxa_id_table[] = {
{ "pxa2xx-i2c", REGS_PXA2XX },
{ "pxa3xx-pwri2c", REGS_PXA3XX },
{ "ce4100-i2c", REGS_CE4100 },
+ { "pxa910-i2c", REGS_PXA910 },
{ },
};
MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
@@ -124,6 +137,24 @@ MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
#define ISR_SAD (1 << 9) /* slave address detected */
#define ISR_BED (1 << 10) /* bus error no ACK/NAK */
+/* bit field shift & mask */
+#define ILCR_SLV_SHIFT 0
+#define ILCR_SLV_MASK (0x1FF << ILCR_SLV_SHIFT)
+#define ILCR_FLV_SHIFT 9
+#define ILCR_FLV_MASK (0x1FF << ILCR_FLV_SHIFT)
+#define ILCR_HLVL_SHIFT 18
+#define ILCR_HLVL_MASK (0x1FF << ILCR_HLVL_SHIFT)
+#define ILCR_HLVH_SHIFT 27
+#define ILCR_HLVH_MASK (0x1F << ILCR_HLVH_SHIFT)
+
+#define IWCR_CNT_SHIFT 0
+#define IWCR_CNT_MASK (0x1F << IWCR_CNT_SHIFT)
+#define IWCR_HS_CNT1_SHIFT 5
+#define IWCR_HS_CNT1_MASK (0x1F << IWCR_HS_CNT1_SHIFT)
+#define IWCR_HS_CNT2_SHIFT 10
+#define IWCR_HS_CNT2_MASK (0x1F << IWCR_HS_CNT2_SHIFT)
+
+
struct pxa_i2c {
spinlock_t lock;
wait_queue_head_t wait;
@@ -150,6 +181,8 @@ struct pxa_i2c {
void __iomem *reg_icr;
void __iomem *reg_isr;
void __iomem *reg_isar;
+ void __iomem *reg_ilcr;
+ void __iomem *reg_iwcr;
unsigned long iobase;
unsigned long iosize;
@@ -169,6 +202,8 @@ struct pxa_i2c {
#define _ICR(i2c) ((i2c)->reg_icr)
#define _ISR(i2c) ((i2c)->reg_isr)
#define _ISAR(i2c) ((i2c)->reg_isar)
+#define _ILCR(i2c) ((i2c)->reg_ilcr)
+#define _IWCR(i2c) ((i2c)->reg_iwcr)
/*
* I2C Slave mode address
@@ -1135,7 +1170,7 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
static const struct of_device_id i2c_pxa_dt_ids[] = {
{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
- { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA2XX },
+ { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 },
{}
};
MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
@@ -1243,6 +1278,11 @@ static int i2c_pxa_probe(struct platform_device *dev)
if (i2c_type != REGS_CE4100)
i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;
+ if (i2c_type == REGS_PXA910) {
+ i2c->reg_ilcr = i2c->reg_base + pxa_reg_layout[i2c_type].ilcr;
+ i2c->reg_iwcr = i2c->reg_base + pxa_reg_layout[i2c_type].iwcr;
+ }
+
i2c->iobase = res->start;
i2c->iosize = resource_size(res);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
