On Mon, 22 Jun 2015, Cyrille Pitchen wrote:
> This driver supports the new Atmel Flexcom. The Flexcom is a wrapper which
> integrates one SPI controller, one I2C controller and one USART. Only one
> function can be enabled at a time. This driver selects the function once
> for all, when the Flexcom is probed, according to the value of the new
> "atmel,flexcom-mode" device tree property.
>
> This driver has chosen to present the Flexcom to the system as a MFD so
> the implementation is seamless for the existing Atmel SPI, I2C and USART
> drivers.
>
> Also the Flexcom embeds FIFOs: the latest patches of the SPI, I2C and
> USART drivers take advantage of this new feature.
>
> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
> Acked-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/mfd/Kconfig | 11 +++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/atmel-flexcom.c | 98 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 110 insertions(+)
> create mode 100644 drivers/mfd/atmel-flexcom.c
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index d5ad04d..9b33ad0 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -59,6 +59,17 @@ config MFD_AAT2870_CORE
> additional drivers must be enabled in order to use the
> functionality of the device.
>
> +config MFD_ATMEL_FLEXCOM
> + tristate "Atmel Flexcom (Flexible Serial Communication Unit)"
> + select MFD_CORE
> + depends on OF
> + help
> + Select this to get support for Atmel Flexcom. This is a wrapper
> + which embeds a SPI controller, a I2C controller and a USART. Only
> + one function can be used at a time. The choice is done at boot time
> + by the probe function of this MFD driver according to a device tree
> + property.
> +
> config MFD_ATMEL_HLCDC
> tristate "Atmel HLCDC (High-end LCD Controller)"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0e5cfeb..c666bf5 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -160,6 +160,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o
> obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
> obj-$(CONFIG_MFD_TPS65090) += tps65090.o
> obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
> +obj-$(CONFIG_MFD_ATMEL_FLEXCOM) += atmel-flexcom.o
> obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
> obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
> obj-$(CONFIG_MFD_PALMAS) += palmas.o
> diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c
> new file mode 100644
> index 0000000..7e7d4b8
> --- /dev/null
> +++ b/drivers/mfd/atmel-flexcom.c
> @@ -0,0 +1,98 @@
> +/*
> + * Driver for Atmel Flexcom
> + *
> + * Copyright (C) 2015 Atmel Corporation
> + *
> + * Author: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/clk.h>
> +
> +#define FX_MR 0x0
> +#define FX_RHR 0x10
> +#define FX_THR 0x20
> +#define FX_VERSION 0xfc
> +
> +#define FX_MR_NO_COM 0
> +#define FX_MR_USART 1
> +#define FX_MR_SPI 2
> +#define FX_MR_TWI 3
> +
> +
> +static int atmel_flexcom_probe(struct platform_device *pdev)
> +{
> + struct clk *clk;
> + struct resource *res;
> + unsigned char __iomem *map;
Would prefer:
void __iomem *base;
> + unsigned int version, mr;
'mr' is not a good variable name.
> + const char *mode;
> + int err;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + map = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(map))
> + return PTR_ERR(map);
> +
> + clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(clk))
> + return PTR_ERR(clk);
> +
> + err = of_property_read_string(pdev->dev.of_node,
> + "atmel,flexcom-mode", &mode);
> + if (err)
> + return err;
> +
> + if (!strcmp(mode, "usart"))
> + mr = FX_MR_USART;
> + else if (!strcmp(mode, "spi"))
> + mr = FX_MR_SPI;
> + else if (!strcmp(mode, "twi") || !strcmp(mode, "i2c"))
> + mr = FX_MR_TWI;
> + else
> + return -EINVAL;
Just use a numerical constant in the DT, then you can
of_property_read_u32(np, "atmel,flexcom-mode", &mr);
Although, hopefully you'll rename 'mr' to be something more
forthcoming.
> + err = clk_prepare_enable(clk);
> + if (err)
> + return err;
'\n' here.
> + version = readl(map + FX_VERSION);
> + writel(mr, map + FX_MR);
'\n' here.
> + clk_disable_unprepare(clk);
> +
> + dev_info(&pdev->dev, "version: %#x, mode: %s\n", version, mode);
How important is it to clog up the bootlog and slow down boot with
this stuff?
> + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
> +}
> +
> +static const struct of_device_id atmel_flexcom_of_match[] = {
> + { .compatible = "atmel,sama5d2-flexcom" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);
> +
> +static struct platform_driver atmel_flexcom_driver = {
> + .driver = {
> + .name = "atmel_flexcom",
> + .of_match_table = atmel_flexcom_of_match,
> + },
> + .probe = atmel_flexcom_probe,
> +};
> +
> +module_platform_driver(atmel_flexcom_driver);
> +
> +MODULE_AUTHOR("Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>");
> +MODULE_DESCRIPTION("Atmel Flexcom MFD driver");
> +MODULE_LICENSE("GPL");
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
