From: Stas Sergeev <stsp@xxxxxxx>
fixed_phy_register() currently hardcodes the fixed PHY link to 1, and
expects to find a "speed" parameter to provide correct information
towards the fixed PHY consumer.
In a subsequent change, where we allow "managed" (e.g: (RS)GMII in-band
status auto-negotiation) fixed PHYs, none of these parameters can be
provided since they will be auto-negotiated, hence, we just provide a
zero-initialized fixed_phy_status to fixed_phy_register() which makes it
fail when we call fixed_phy_update_regs() since status.speed = 0 which
makes us hit the "default" label and error out.
Without this change, we would also see potentially inconsistent
speed/duplex parameters for fixed PHYs when the link is DOWN.
CC: netdev@xxxxxxxxxxxxxxx
CC: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Stas Sergeev <stsp@xxxxxxxxxxxxxxxxxxxxx>
[florian: add more background to why this is correct and desirable]
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
drivers/net/phy/fixed_phy.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c
index 1960b46add65..479b93f9581c 100644
--- a/drivers/net/phy/fixed_phy.c
+++ b/drivers/net/phy/fixed_phy.c
@@ -52,6 +52,10 @@ static int fixed_phy_update_regs(struct fixed_phy *fp)
u16 lpagb = 0;
u16 lpa = 0;
+ if (!fp->status.link)
+ goto done;
+ bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
+
if (fp->status.duplex) {
bmcr |= BMCR_FULLDPLX;
@@ -96,15 +100,13 @@ static int fixed_phy_update_regs(struct fixed_phy *fp)
}
}
- if (fp->status.link)
- bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
-
if (fp->status.pause)
lpa |= LPA_PAUSE_CAP;
if (fp->status.asym_pause)
lpa |= LPA_PAUSE_ASYM;
+done:
fp->regs[MII_PHYSID1] = 0;
fp->regs[MII_PHYSID2] = 0;
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
