On Mon, Jun 15, 2015 at 05:01:34PM +0800, Dudley Du wrote: > Fix the the runtime suspend power management not working issue when system > starts up and before user touches the trackpad device. > TEST=test on Chromebook. > > Signed-off-by: Dudley Du <dudl@xxxxxxxxxxx> Applied, thank you. > --- > drivers/input/mouse/cyapa.c | 79 +++++++++++++++++++++++++++------------- > drivers/input/mouse/cyapa.h | 2 +- > drivers/input/mouse/cyapa_gen3.c | 4 +- > drivers/input/mouse/cyapa_gen5.c | 21 +++++++---- > drivers/input/mouse/cyapa_gen6.c | 4 +- > 5 files changed, 72 insertions(+), 38 deletions(-) > > diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c > index d2a24fc..9288948 100644 > --- a/drivers/input/mouse/cyapa.c > +++ b/drivers/input/mouse/cyapa.c > @@ -371,7 +371,7 @@ static int cyapa_detect(struct cyapa *cyapa) > static int cyapa_open(struct input_dev *input) > { > struct cyapa *cyapa = input_get_drvdata(input); > - struct i2c_client *client = cyapa->client; > + struct device *dev = &cyapa->client->dev; > int error; > > error = mutex_lock_interruptible(&cyapa->state_sync_lock); > @@ -385,10 +385,9 @@ static int cyapa_open(struct input_dev *input) > * when in operational mode. > */ > error = cyapa->ops->set_power_mode(cyapa, > - PWR_MODE_FULL_ACTIVE, 0); > + PWR_MODE_FULL_ACTIVE, 0, false); > if (error) { > - dev_warn(&client->dev, > - "set active power failed: %d\n", error); > + dev_warn(dev, "set active power failed: %d\n", error); > goto out; > } > } else { > @@ -399,11 +398,15 @@ static int cyapa_open(struct input_dev *input) > } > } > > - enable_irq(client->irq); > - if (!pm_runtime_enabled(&client->dev)) { > - pm_runtime_set_active(&client->dev); > - pm_runtime_enable(&client->dev); > + enable_irq(cyapa->client->irq); > + if (!pm_runtime_enabled(dev)) { > + pm_runtime_set_active(dev); > + pm_runtime_enable(dev); > } > + > + pm_runtime_get_sync(dev); > + pm_runtime_mark_last_busy(dev); > + pm_runtime_put_sync_autosuspend(dev); > out: > mutex_unlock(&cyapa->state_sync_lock); > return error; > @@ -412,17 +415,17 @@ out: > static void cyapa_close(struct input_dev *input) > { > struct cyapa *cyapa = input_get_drvdata(input); > - struct i2c_client *client = cyapa->client; > + struct device *dev = &cyapa->client->dev; > > mutex_lock(&cyapa->state_sync_lock); > > - disable_irq(client->irq); > - if (pm_runtime_enabled(&client->dev)) > - pm_runtime_disable(&client->dev); > - pm_runtime_set_suspended(&client->dev); > + disable_irq(cyapa->client->irq); > + if (pm_runtime_enabled(dev)) > + pm_runtime_disable(dev); > + pm_runtime_set_suspended(dev); > > if (cyapa->operational) > - cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0); > + cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0, false); > > mutex_unlock(&cyapa->state_sync_lock); > } > @@ -533,7 +536,7 @@ static void cyapa_enable_irq_for_cmd(struct cyapa *cyapa) > */ > if (!input || cyapa->operational) > cyapa->ops->set_power_mode(cyapa, > - PWR_MODE_FULL_ACTIVE, 0); > + PWR_MODE_FULL_ACTIVE, 0, false); > /* Gen3 always using polling mode for command. */ > if (cyapa->gen >= CYAPA_GEN5) > enable_irq(cyapa->client->irq); > @@ -548,7 +551,8 @@ static void cyapa_disable_irq_for_cmd(struct cyapa *cyapa) > if (cyapa->gen >= CYAPA_GEN5) > disable_irq(cyapa->client->irq); > if (!input || cyapa->operational) > - cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0); > + cyapa->ops->set_power_mode(cyapa, > + PWR_MODE_OFF, 0, false); > } > } > > @@ -615,7 +619,7 @@ static int cyapa_initialize(struct cyapa *cyapa) > > /* Power down the device until we need it. */ > if (cyapa->operational) > - cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0); > + cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0, false); > > return 0; > } > @@ -631,7 +635,8 @@ static int cyapa_reinitialize(struct cyapa *cyapa) > > /* Avoid command failures when TP was in OFF state. */ > if (cyapa->operational) > - cyapa->ops->set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE, 0); > + cyapa->ops->set_power_mode(cyapa, > + PWR_MODE_FULL_ACTIVE, 0, false); > > error = cyapa_detect(cyapa); > if (error) > @@ -650,7 +655,8 @@ out: > if (!input || !input->users) { > /* Reset to power OFF state to save power when no user open. */ > if (cyapa->operational) > - cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0); > + cyapa->ops->set_power_mode(cyapa, > + PWR_MODE_OFF, 0, false); > } else if (!error && cyapa->operational) { > /* > * Make sure only enable runtime PM when device is > @@ -658,6 +664,10 @@ out: > */ > pm_runtime_set_active(dev); > pm_runtime_enable(dev); > + > + pm_runtime_get_sync(dev); > + pm_runtime_mark_last_busy(dev); > + pm_runtime_put_sync_autosuspend(dev); > } > > return error; > @@ -667,8 +677,8 @@ static irqreturn_t cyapa_irq(int irq, void *dev_id) > { > struct cyapa *cyapa = dev_id; > struct device *dev = &cyapa->client->dev; > + int error; > > - pm_runtime_get_sync(dev); > if (device_may_wakeup(dev)) > pm_wakeup_event(dev, 0); > > @@ -687,7 +697,24 @@ static irqreturn_t cyapa_irq(int irq, void *dev_id) > goto out; > } > > - if (!cyapa->operational || cyapa->ops->irq_handler(cyapa)) { > + if (cyapa->operational) { > + error = cyapa->ops->irq_handler(cyapa); > + > + /* > + * Apply runtime power management to touch report event > + * except the events caused by the command responses. > + * Note: > + * It will introduce about 20~40 ms additional delay > + * time in receiving for first valid touch report data. > + * The time is used to execute device runtime resume > + * process. > + */ > + pm_runtime_get_sync(dev); > + pm_runtime_mark_last_busy(dev); > + pm_runtime_put_sync_autosuspend(dev); > + } > + > + if (!cyapa->operational || error) { > if (!mutex_trylock(&cyapa->state_sync_lock)) { > cyapa->ops->sort_empty_output_data(cyapa, > NULL, NULL, NULL); > @@ -699,8 +726,6 @@ static irqreturn_t cyapa_irq(int irq, void *dev_id) > } > > out: > - pm_runtime_mark_last_busy(dev); > - pm_runtime_put_sync_autosuspend(dev); > return IRQ_HANDLED; > } > > @@ -1341,7 +1366,7 @@ static int __maybe_unused cyapa_suspend(struct device *dev) > power_mode = device_may_wakeup(dev) ? cyapa->suspend_power_mode > : PWR_MODE_OFF; > error = cyapa->ops->set_power_mode(cyapa, power_mode, > - cyapa->suspend_sleep_time); > + cyapa->suspend_sleep_time, true); > if (error) > dev_err(dev, "suspend set power mode failed: %d\n", > error); > @@ -1395,7 +1420,8 @@ static int __maybe_unused cyapa_runtime_suspend(struct device *dev) > > error = cyapa->ops->set_power_mode(cyapa, > cyapa->runtime_suspend_power_mode, > - cyapa->runtime_suspend_sleep_time); > + cyapa->runtime_suspend_sleep_time, > + false); > if (error) > dev_warn(dev, "runtime suspend failed: %d\n", error); > > @@ -1407,7 +1433,8 @@ static int __maybe_unused cyapa_runtime_resume(struct device *dev) > struct cyapa *cyapa = dev_get_drvdata(dev); > int error; > > - error = cyapa->ops->set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE, 0); > + error = cyapa->ops->set_power_mode(cyapa, > + PWR_MODE_FULL_ACTIVE, 0, false); > if (error) > dev_warn(dev, "runtime resume failed: %d\n", error); > > diff --git a/drivers/input/mouse/cyapa.h b/drivers/input/mouse/cyapa.h > index 203d7a2..a734ab8 100644 > --- a/drivers/input/mouse/cyapa.h > +++ b/drivers/input/mouse/cyapa.h > @@ -273,7 +273,7 @@ struct cyapa_dev_ops { > int (*sort_empty_output_data)(struct cyapa *, > u8 *, int *, cb_sort); > > - int (*set_power_mode)(struct cyapa *, u8, u16); > + int (*set_power_mode)(struct cyapa *, u8, u16, bool); > > int (*set_proximity)(struct cyapa *, bool); > }; > diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c > index 6460beb..1274b3f 100644 > --- a/drivers/input/mouse/cyapa_gen3.c > +++ b/drivers/input/mouse/cyapa_gen3.c > @@ -950,7 +950,7 @@ static u16 cyapa_get_wait_time_for_pwr_cmd(u8 pwr_mode) > * Device power mode can only be set when device is in operational mode. > */ > static int cyapa_gen3_set_power_mode(struct cyapa *cyapa, u8 power_mode, > - u16 always_unused) > + u16 always_unused, bool is_suspend_unused) > { > int ret; > u8 power; > @@ -1107,7 +1107,7 @@ static int cyapa_gen3_do_operational_check(struct cyapa *cyapa) > * may cause problems, so we set the power mode first here. > */ > error = cyapa_gen3_set_power_mode(cyapa, > - PWR_MODE_FULL_ACTIVE, 0); > + PWR_MODE_FULL_ACTIVE, 0, false); > if (error) > dev_err(dev, "%s: set full power mode failed: %d\n", > __func__, error); > diff --git a/drivers/input/mouse/cyapa_gen5.c b/drivers/input/mouse/cyapa_gen5.c > index 519d437..e311b1b 100644 > --- a/drivers/input/mouse/cyapa_gen5.c > +++ b/drivers/input/mouse/cyapa_gen5.c > @@ -19,6 +19,7 @@ > #include <linux/slab.h> > #include <asm/unaligned.h> > #include <linux/crc-itu-t.h> > +#include <linux/pm_runtime.h> > #include "cyapa.h" > > > @@ -1565,7 +1566,7 @@ int cyapa_pip_deep_sleep(struct cyapa *cyapa, u8 state) > } > > static int cyapa_gen5_set_power_mode(struct cyapa *cyapa, > - u8 power_mode, u16 sleep_time) > + u8 power_mode, u16 sleep_time, bool is_suspend) > { > struct device *dev = &cyapa->client->dev; > u8 power_state; > @@ -1574,9 +1575,6 @@ static int cyapa_gen5_set_power_mode(struct cyapa *cyapa, > if (cyapa->state != CYAPA_STATE_GEN5_APP) > return 0; > > - /* Dump all the report data before do power mode commmands. */ > - cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL); > - > if (PIP_DEV_GET_PWR_STATE(cyapa) == UNINIT_PWR_MODE) { > /* > * Assume TP in deep sleep mode when driver is loaded, > @@ -1679,8 +1677,8 @@ static int cyapa_gen5_set_power_mode(struct cyapa *cyapa, > * is suspending which may cause interrupt line unable to be > * asserted again. > */ > - cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL); > - cyapa_gen5_disable_pip_report(cyapa); > + if (is_suspend) > + cyapa_gen5_disable_pip_report(cyapa); > > PIP_DEV_SET_PWR_STATE(cyapa, > cyapa_sleep_time_to_pwr_cmd(sleep_time)); > @@ -2515,7 +2513,7 @@ static int cyapa_gen5_do_operational_check(struct cyapa *cyapa) > * the device state is required. > */ > error = cyapa_gen5_set_power_mode(cyapa, > - PWR_MODE_FULL_ACTIVE, 0); > + PWR_MODE_FULL_ACTIVE, 0, false); > if (error) > dev_warn(dev, "%s: failed to set power active mode.\n", > __func__); > @@ -2757,7 +2755,16 @@ int cyapa_pip_irq_handler(struct cyapa *cyapa) > /* > * Device wake event from deep sleep mode for touch. > * This interrupt event is used to wake system up. > + * > + * Note: > + * It will introduce about 20~40 ms additional delay > + * time in receiving for first valid touch report data. > + * The time is used to execute device runtime resume > + * process. > */ > + pm_runtime_get_sync(dev); > + pm_runtime_mark_last_busy(dev); > + pm_runtime_put_sync_autosuspend(dev); > return 0; > } else if (report_id != PIP_TOUCH_REPORT_ID && > report_id != PIP_BTN_REPORT_ID && > diff --git a/drivers/input/mouse/cyapa_gen6.c b/drivers/input/mouse/cyapa_gen6.c > index e97c1b5..f2287ed 100644 > --- a/drivers/input/mouse/cyapa_gen6.c > +++ b/drivers/input/mouse/cyapa_gen6.c > @@ -429,7 +429,7 @@ static int cyapa_gen6_deep_sleep(struct cyapa *cyapa, u8 state) > } > > static int cyapa_gen6_set_power_mode(struct cyapa *cyapa, > - u8 power_mode, u16 sleep_time) > + u8 power_mode, u16 sleep_time, bool is_suspend) > { > struct device *dev = &cyapa->client->dev; > struct gen6_interval_setting *interval_setting = > @@ -690,7 +690,7 @@ static int cyapa_gen6_operational_check(struct cyapa *cyapa) > * the device state is required. > */ > error = cyapa_gen6_set_power_mode(cyapa, > - PWR_MODE_FULL_ACTIVE, 0); > + PWR_MODE_FULL_ACTIVE, 0, false); > if (error) > dev_warn(dev, "%s: failed to set power active mode.\n", > __func__); > -- > 1.9.1 > > > --------------------------------------------------------------- > This message and any attachments may contain Cypress (or its > subsidiaries) confidential information. If it has been received > in error, please advise the sender and immediately delete this > message. > --------------------------------------------------------------- > -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html