On Mon, Jun 15, 2015 at 05:01:32PM +0800, Dudley Du wrote:
> Based on the cyapa core, add the gen6 trackpad device's basic functions
> supported, so gen6 trackpad device can work with kernel input system.
> And also based on the state parse interface, the cyapa driver can
> automatically determine the attached is gen3, gen5 or gen6 protocol
> trackpad device, then set the correct protocol to work with the attached
> trackpad device.
> TEST=test on Chromebook.
>
> Signed-off-by: Dudley Du <dudl@xxxxxxxxxxx>
Applied, thank you.
> ---
> drivers/input/mouse/Makefile | 2 +-
> drivers/input/mouse/cyapa.c | 22 ++
> drivers/input/mouse/cyapa.h | 15 +
> drivers/input/mouse/cyapa_gen5.c | 69 +++-
> drivers/input/mouse/cyapa_gen6.c | 727 +++++++++++++++++++++++++++++++++++++++
> 5 files changed, 831 insertions(+), 4 deletions(-)
> create mode 100644 drivers/input/mouse/cyapa_gen6.c
>
> diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
> index 793300b..ee6a6e9 100644
> --- a/drivers/input/mouse/Makefile
> +++ b/drivers/input/mouse/Makefile
> @@ -24,7 +24,7 @@ obj-$(CONFIG_MOUSE_SYNAPTICS_I2C) += synaptics_i2c.o
> obj-$(CONFIG_MOUSE_SYNAPTICS_USB) += synaptics_usb.o
> obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
>
> -cyapatp-objs := cyapa.o cyapa_gen3.o cyapa_gen5.o
> +cyapatp-objs := cyapa.o cyapa_gen3.o cyapa_gen5.o cyapa_gen6.o
> psmouse-objs := psmouse-base.o synaptics.o focaltech.o
>
> psmouse-$(CONFIG_MOUSE_PS2_ALPS) += alps.o
> diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
> index 4f0d76e..dbb53eb 100644
> --- a/drivers/input/mouse/cyapa.c
> +++ b/drivers/input/mouse/cyapa.c
> @@ -41,6 +41,9 @@ static int cyapa_reinitialize(struct cyapa *cyapa);
>
> bool cyapa_is_pip_bl_mode(struct cyapa *cyapa)
> {
> + if (cyapa->gen == CYAPA_GEN6 && cyapa->state == CYAPA_STATE_GEN6_BL)
> + return true;
> +
> if (cyapa->gen == CYAPA_GEN5 && cyapa->state == CYAPA_STATE_GEN5_BL)
> return true;
>
> @@ -49,6 +52,9 @@ bool cyapa_is_pip_bl_mode(struct cyapa *cyapa)
>
> bool cyapa_is_pip_app_mode(struct cyapa *cyapa)
> {
> + if (cyapa->gen == CYAPA_GEN6 && cyapa->state == CYAPA_STATE_GEN6_APP)
> + return true;
> +
> if (cyapa->gen == CYAPA_GEN5 && cyapa->state == CYAPA_STATE_GEN5_APP)
> return true;
>
> @@ -204,6 +210,15 @@ static int cyapa_get_state(struct cyapa *cyapa)
> if (!error)
> goto out_detected;
> }
> + if (cyapa->gen == CYAPA_GEN_UNKNOWN ||
> + cyapa->gen == CYAPA_GEN6 ||
> + cyapa->gen == CYAPA_GEN5) {
> + error = cyapa_pip_state_parse(cyapa,
> + status, BL_STATUS_SIZE);
> + if (!error)
> + goto out_detected;
> + }
> + /* For old Gen5 trackpads detecting. */
> if ((cyapa->gen == CYAPA_GEN_UNKNOWN ||
> cyapa->gen == CYAPA_GEN5) &&
> !smbus && even_addr) {
> @@ -300,6 +315,9 @@ static int cyapa_check_is_operational(struct cyapa *cyapa)
> return error;
>
> switch (cyapa->gen) {
> + case CYAPA_GEN6:
> + cyapa->ops = &cyapa_gen6_ops;
> + break;
> case CYAPA_GEN5:
> cyapa->ops = &cyapa_gen5_ops;
> break;
> @@ -579,6 +597,8 @@ static int cyapa_initialize(struct cyapa *cyapa)
> error = cyapa_gen3_ops.initialize(cyapa);
> if (!error)
> error = cyapa_gen5_ops.initialize(cyapa);
> + if (!error)
> + error = cyapa_gen6_ops.initialize(cyapa);
> if (error)
> return error;
>
> @@ -1136,9 +1156,11 @@ static char *cyapa_state_to_string(struct cyapa *cyapa)
> case CYAPA_STATE_BL_ACTIVE:
> return "bootloader active";
> case CYAPA_STATE_GEN5_BL:
> + case CYAPA_STATE_GEN6_BL:
> return "bootloader";
> case CYAPA_STATE_OP:
> case CYAPA_STATE_GEN5_APP:
> + case CYAPA_STATE_GEN6_APP:
> return "operational"; /* Normal valid state. */
> default:
> return "invalid mode";
> diff --git a/drivers/input/mouse/cyapa.h b/drivers/input/mouse/cyapa.h
> index d019d1d..3a211c0 100644
> --- a/drivers/input/mouse/cyapa.h
> +++ b/drivers/input/mouse/cyapa.h
> @@ -19,6 +19,7 @@
> #define CYAPA_GEN_UNKNOWN 0x00 /* unknown protocol. */
> #define CYAPA_GEN3 0x03 /* support MT-protocol B with tracking ID. */
> #define CYAPA_GEN5 0x05 /* support TrueTouch GEN5 trackpad device. */
> +#define CYAPA_GEN6 0x06 /* support TrueTouch GEN6 trackpad device. */
>
> #define CYAPA_NAME "Cypress APA Trackpad (cyapa)"
>
> @@ -198,6 +199,9 @@
> #define PIP_BL_APP_INFO_RESP_LENGTH 30
> #define PIP_BL_GET_INFO_RESP_LENGTH 19
>
> +#define PIP_BL_PLATFORM_VER_SHIFT 4
> +#define PIP_BL_PLATFORM_VER_MASK 0x0f
> +
> #define PIP_PRODUCT_FAMILY_MASK 0xf000
> #define PIP_PRODUCT_FAMILY_TRACKPAD 0x1000
>
> @@ -299,6 +303,14 @@ enum cyapa_state {
> CYAPA_STATE_OP,
> CYAPA_STATE_GEN5_BL,
> CYAPA_STATE_GEN5_APP,
> + CYAPA_STATE_GEN6_BL,
> + CYAPA_STATE_GEN6_APP,
> +};
> +
> +struct gen6_interval_setting {
> + u16 active_interval;
> + u16 lp1_interval;
> + u16 lp2_interval;
> };
>
> /* The main device structure */
> @@ -320,9 +332,11 @@ struct cyapa {
> u16 runtime_suspend_sleep_time;
> u8 dev_pwr_mode;
> u16 dev_sleep_time;
> + struct gen6_interval_setting gen6_interval_setting;
>
> /* Read from query data region. */
> char product_id[16];
> + u8 platform_ver; /* Platform version. */
> u8 fw_maj_ver; /* Firmware major version. */
> u8 fw_min_ver; /* Firmware minor version. */
> u8 btn_capability;
> @@ -411,5 +425,6 @@ extern u8 pip_bl_read_app_info[];
> extern const char product_id[];
> extern const struct cyapa_dev_ops cyapa_gen3_ops;
> extern const struct cyapa_dev_ops cyapa_gen5_ops;
> +extern const struct cyapa_dev_ops cyapa_gen6_ops;
>
> #endif
> diff --git a/drivers/input/mouse/cyapa_gen5.c b/drivers/input/mouse/cyapa_gen5.c
> index 9d75c6f..4e19dce 100644
> --- a/drivers/input/mouse/cyapa_gen5.c
> +++ b/drivers/input/mouse/cyapa_gen5.c
> @@ -133,7 +133,9 @@ struct cyapa_pip_touch_record {
> * Bit 7 - 3: reserved
> * Bit 2 - 0: touch type;
> * 0 : standard finger;
> - * 1 - 15 : reserved.
> + * 1 : proximity (Start supported in Gen5 TP).
> + * 2 : finger hover (defined, but not used yet.)
> + * 3 - 15 : reserved.
> */
> u8 touch_type;
>
> @@ -167,6 +169,9 @@ struct cyapa_pip_touch_record {
> * The meaning of this value is different when touch_type is different.
> * For standard finger type:
> * Touch intensity in counts, pressure value.
> + * For proximity type (Start supported in Gen5 TP):
> + * The distance, in surface units, between the contact and
> + * the surface.
> **/
> u8 z;
>
> @@ -218,6 +223,12 @@ struct cyapa_tsg_bin_image_head {
> u8 fw_major_version;
> u8 fw_minor_version;
> u8 fw_revision_control_number[8];
> + u8 silicon_id_hi;
> + u8 silicon_id_lo;
> + u8 chip_revision;
> + u8 family_id;
> + u8 bl_ver_maj;
> + u8 bl_ver_min;
> } __packed;
>
> struct cyapa_tsg_bin_image_data_record {
> @@ -1134,6 +1145,39 @@ int cyapa_pip_bl_enter(struct cyapa *cyapa)
> cyapa->operational = false;
> if (cyapa->gen == CYAPA_GEN5)
> cyapa->state = CYAPA_STATE_GEN5_BL;
> + else if (cyapa->gen == CYAPA_GEN6)
> + cyapa->state = CYAPA_STATE_GEN6_BL;
> + return 0;
> +}
> +
> +static int cyapa_pip_fw_head_check(struct cyapa *cyapa,
> + struct cyapa_tsg_bin_image_head *image_head)
> +{
> + if (image_head->head_size != 0x0C && image_head->head_size != 0x12)
> + return -EINVAL;
> +
> + switch (cyapa->gen) {
> + case CYAPA_GEN6:
> + if (image_head->family_id != 0x9B ||
> + image_head->silicon_id_hi != 0x0B)
> + return -EINVAL;
> + break;
> + case CYAPA_GEN5:
> + /* Gen5 without proximity support. */
> + if (cyapa->platform_ver < 2) {
> + if (image_head->head_size == 0x0C)
> + break;
> + return -EINVAL;
> + }
> +
> + if (image_head->family_id != 0x91 ||
> + image_head->silicon_id_hi != 0x02)
> + return -EINVAL;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> return 0;
> }
>
> @@ -1150,6 +1194,14 @@ int cyapa_pip_check_fw(struct cyapa *cyapa, const struct firmware *fw)
> u16 app_integrity_crc;
> int i;
>
> + /* Verify the firmware image not miss-used for Gen5 and Gen6. */
> + if (cyapa_pip_fw_head_check(cyapa,
> + (struct cyapa_tsg_bin_image_head *)fw->data)) {
> + dev_err(dev, "%s: firmware image not match TP device.\n",
> + __func__);
> + return -EINVAL;
> + }
> +
> image_records =
> cyapa_get_image_record_data_num(fw, &flash_records_count);
>
> @@ -2339,6 +2391,9 @@ static int cyapa_gen5_bl_query_data(struct cyapa *cyapa)
> cyapa->fw_maj_ver = resp_data[22];
> cyapa->fw_min_ver = resp_data[23];
>
> + cyapa->platform_ver = (resp_data[26] >> PIP_BL_PLATFORM_VER_SHIFT) &
> + PIP_BL_PLATFORM_VER_MASK;
> +
> return 0;
> }
>
> @@ -2362,8 +2417,16 @@ static int cyapa_gen5_get_query_data(struct cyapa *cyapa)
> PIP_PRODUCT_FAMILY_TRACKPAD)
> return -EINVAL;
>
> - cyapa->fw_maj_ver = resp_data[15];
> - cyapa->fw_min_ver = resp_data[16];
> + cyapa->platform_ver = (resp_data[49] >> PIP_BL_PLATFORM_VER_SHIFT) &
> + PIP_BL_PLATFORM_VER_MASK;
> + if (cyapa->gen == CYAPA_GEN5 && cyapa->platform_ver < 2) {
> + /* Gen5 firmware that does not support proximity. */
> + cyapa->fw_maj_ver = resp_data[15];
> + cyapa->fw_min_ver = resp_data[16];
> + } else {
> + cyapa->fw_maj_ver = resp_data[9];
> + cyapa->fw_min_ver = resp_data[10];
> + }
>
> cyapa->electrodes_x = resp_data[52];
> cyapa->electrodes_y = resp_data[53];
> diff --git a/drivers/input/mouse/cyapa_gen6.c b/drivers/input/mouse/cyapa_gen6.c
> new file mode 100644
> index 0000000..2c5776e
> --- /dev/null
> +++ b/drivers/input/mouse/cyapa_gen6.c
> @@ -0,0 +1,727 @@
> +/*
> + * Cypress APA trackpad with I2C interface
> + *
> + * Author: Dudley Du <dudl@xxxxxxxxxxx>
> + *
> + * Copyright (C) 2015 Cypress Semiconductor, Inc.
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file COPYING in the main directory of this archive for
> + * more details.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/input/mt.h>
> +#include <linux/mutex.h>
> +#include <linux/completion.h>
> +#include <linux/slab.h>
> +#include <asm/unaligned.h>
> +#include <linux/crc-itu-t.h>
> +#include "cyapa.h"
> +
> +
> +#define GEN6_ENABLE_CMD_IRQ 0x41
> +#define GEN6_DISABLE_CMD_IRQ 0x42
> +#define GEN6_ENABLE_DEV_IRQ 0x43
> +#define GEN6_DISABLE_DEV_IRQ 0x44
> +
> +#define GEN6_POWER_MODE_ACTIVE 0x01
> +#define GEN6_POWER_MODE_LP_MODE1 0x02
> +#define GEN6_POWER_MODE_LP_MODE2 0x03
> +#define GEN6_POWER_MODE_BTN_ONLY 0x04
> +
> +#define GEN6_SET_POWER_MODE_INTERVAL 0x47
> +#define GEN6_GET_POWER_MODE_INTERVAL 0x48
> +
> +#define GEN6_MAX_RX_NUM 14
> +#define GEN6_RETRIEVE_DATA_ID_RX_ATTENURATOR_IDAC 0x00
> +#define GEN6_RETRIEVE_DATA_ID_ATTENURATOR_TRIM 0x12
> +
> +
> +struct pip_app_cmd_head {
> + __le16 addr;
> + __le16 length;
> + u8 report_id;
> + u8 resv; /* Reserved, must be 0 */
> + u8 cmd_code; /* bit7: resv, set to 0; bit6~0: command code.*/
> +} __packed;
> +
> +struct pip_app_resp_head {
> + __le16 length;
> + u8 report_id;
> + u8 resv; /* Reserved, must be 0 */
> + u8 cmd_code; /* bit7: TGL; bit6~0: command code.*/
> + /*
> + * The value of data_status can be the first byte of data or
> + * the command status or the unsupported command code depending on the
> + * requested command code.
> + */
> + u8 data_status;
> +} __packed;
> +
> +struct pip_fixed_info {
> + u8 silicon_id_high;
> + u8 silicon_id_low;
> + u8 family_id;
> +};
> +
> +static u8 pip_get_bl_info[] = {
> + 0x04, 0x00, 0x0B, 0x00, 0x40, 0x00, 0x01, 0x38,
> + 0x00, 0x00, 0x70, 0x9E, 0x17
> +};
> +
> +static bool cyapa_sort_pip_hid_descriptor_data(struct cyapa *cyapa,
> + u8 *buf, int len)
> +{
> + if (len != PIP_HID_DESCRIPTOR_SIZE)
> + return false;
> +
> + if (buf[PIP_RESP_REPORT_ID_OFFSET] == PIP_HID_APP_REPORT_ID ||
> + buf[PIP_RESP_REPORT_ID_OFFSET] == PIP_HID_BL_REPORT_ID)
> + return true;
> +
> + return false;
> +}
> +
> +static int cyapa_get_pip_fixed_info(struct cyapa *cyapa,
> + struct pip_fixed_info *pip_info, bool is_bootloader)
> +{
> + u8 resp_data[PIP_READ_SYS_INFO_RESP_LENGTH];
> + int resp_len;
> + u16 product_family;
> + int error;
> +
> + if (is_bootloader) {
> + /* Read Bootloader Information to determine Gen5 or Gen6. */
> + resp_len = sizeof(resp_data);
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
> + pip_get_bl_info, sizeof(pip_get_bl_info),
> + resp_data, &resp_len,
> + 2000, cyapa_sort_tsg_pip_bl_resp_data,
> + false);
> + if (error || resp_len < PIP_BL_GET_INFO_RESP_LENGTH)
> + return error ? error : -EIO;
> +
> + pip_info->family_id = resp_data[8];
> + pip_info->silicon_id_low = resp_data[10];
> + pip_info->silicon_id_high = resp_data[11];
> +
> + return 0;
> + }
> +
> + /* Get App System Information to determine Gen5 or Gen6. */
> + resp_len = sizeof(resp_data);
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
> + pip_read_sys_info, PIP_READ_SYS_INFO_CMD_LENGTH,
> + resp_data, &resp_len,
> + 2000, cyapa_pip_sort_system_info_data, false);
> + if (error || resp_len < PIP_READ_SYS_INFO_RESP_LENGTH)
> + return error ? error : -EIO;
> +
> + product_family = get_unaligned_le16(&resp_data[7]);
> + if ((product_family & PIP_PRODUCT_FAMILY_MASK) !=
> + PIP_PRODUCT_FAMILY_TRACKPAD)
> + return -EINVAL;
> +
> + pip_info->family_id = resp_data[19];
> + pip_info->silicon_id_low = resp_data[21];
> + pip_info->silicon_id_high = resp_data[22];
> +
> + return 0;
> +
> +}
> +
> +int cyapa_pip_state_parse(struct cyapa *cyapa, u8 *reg_data, int len)
> +{
> + u8 cmd[] = { 0x01, 0x00};
> + struct pip_fixed_info pip_info;
> + u8 resp_data[PIP_HID_DESCRIPTOR_SIZE];
> + int resp_len;
> + bool is_bootloader;
> + int error;
> +
> + cyapa->state = CYAPA_STATE_NO_DEVICE;
> +
> + /* Try to wake from it deep sleep state if it is. */
> + cyapa_pip_deep_sleep(cyapa, PIP_DEEP_SLEEP_STATE_ON);
> +
> + /* Empty the buffer queue to get fresh data with later commands. */
> + cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL);
> +
> + /*
> + * Read description info from trackpad device to determine running in
> + * APP mode or Bootloader mode.
> + */
> + resp_len = PIP_HID_DESCRIPTOR_SIZE;
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
> + cmd, sizeof(cmd),
> + resp_data, &resp_len,
> + 300,
> + cyapa_sort_pip_hid_descriptor_data,
> + false);
> + if (error)
> + return error;
> +
> + if (resp_data[PIP_RESP_REPORT_ID_OFFSET] == PIP_HID_BL_REPORT_ID)
> + is_bootloader = true;
> + else if (resp_data[PIP_RESP_REPORT_ID_OFFSET] == PIP_HID_APP_REPORT_ID)
> + is_bootloader = false;
> + else
> + return -EAGAIN;
> +
> + /* Get PIP fixed information to determine Gen5 or Gen6. */
> + memset(&pip_info, 0, sizeof(struct pip_fixed_info));
> + error = cyapa_get_pip_fixed_info(cyapa, &pip_info, is_bootloader);
> + if (error)
> + return error;
> +
> + if (pip_info.family_id == 0x9B && pip_info.silicon_id_high == 0x0B) {
> + cyapa->gen = CYAPA_GEN6;
> + cyapa->state = is_bootloader ? CYAPA_STATE_GEN6_BL
> + : CYAPA_STATE_GEN6_APP;
> + } else if (pip_info.family_id == 0x91 &&
> + pip_info.silicon_id_high == 0x02) {
> + cyapa->gen = CYAPA_GEN5;
> + cyapa->state = is_bootloader ? CYAPA_STATE_GEN5_BL
> + : CYAPA_STATE_GEN5_APP;
> + }
> +
> + return 0;
> +}
> +
> +static int cyapa_gen6_read_sys_info(struct cyapa *cyapa)
> +{
> + u8 resp_data[PIP_READ_SYS_INFO_RESP_LENGTH];
> + int resp_len;
> + u16 product_family;
> + u8 rotat_align;
> + int error;
> +
> + /* Get App System Information to determine Gen5 or Gen6. */
> + resp_len = sizeof(resp_data);
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
> + pip_read_sys_info, PIP_READ_SYS_INFO_CMD_LENGTH,
> + resp_data, &resp_len,
> + 2000, cyapa_pip_sort_system_info_data, false);
> + if (error || resp_len < sizeof(resp_data))
> + return error ? error : -EIO;
> +
> + product_family = get_unaligned_le16(&resp_data[7]);
> + if ((product_family & PIP_PRODUCT_FAMILY_MASK) !=
> + PIP_PRODUCT_FAMILY_TRACKPAD)
> + return -EINVAL;
> +
> + cyapa->platform_ver = (resp_data[67] >> PIP_BL_PLATFORM_VER_SHIFT) &
> + PIP_BL_PLATFORM_VER_MASK;
> + cyapa->fw_maj_ver = resp_data[9];
> + cyapa->fw_min_ver = resp_data[10];
> +
> + cyapa->electrodes_x = resp_data[33];
> + cyapa->electrodes_y = resp_data[34];
> +
> + cyapa->physical_size_x = get_unaligned_le16(&resp_data[35]) / 100;
> + cyapa->physical_size_y = get_unaligned_le16(&resp_data[37]) / 100;
> +
> + cyapa->max_abs_x = get_unaligned_le16(&resp_data[39]);
> + cyapa->max_abs_y = get_unaligned_le16(&resp_data[41]);
> +
> + cyapa->max_z = get_unaligned_le16(&resp_data[43]);
> +
> + cyapa->x_origin = resp_data[45] & 0x01;
> + cyapa->y_origin = resp_data[46] & 0x01;
> +
> + cyapa->btn_capability = (resp_data[70] << 3) & CAPABILITY_BTN_MASK;
> +
> + memcpy(&cyapa->product_id[0], &resp_data[51], 5);
> + cyapa->product_id[5] = '-';
> + memcpy(&cyapa->product_id[6], &resp_data[56], 6);
> + cyapa->product_id[12] = '-';
> + memcpy(&cyapa->product_id[13], &resp_data[62], 2);
> + cyapa->product_id[15] = '\0';
> +
> + rotat_align = resp_data[68];
> + if (rotat_align) {
> + cyapa->electrodes_rx = cyapa->electrodes_y;
> + cyapa->electrodes_rx = cyapa->electrodes_y;
> + } else {
> + cyapa->electrodes_rx = cyapa->electrodes_x;
> + cyapa->electrodes_rx = cyapa->electrodes_y;
> + }
> + cyapa->aligned_electrodes_rx = (cyapa->electrodes_rx + 3) & ~3u;
> +
> + if (!cyapa->electrodes_x || !cyapa->electrodes_y ||
> + !cyapa->physical_size_x || !cyapa->physical_size_y ||
> + !cyapa->max_abs_x || !cyapa->max_abs_y || !cyapa->max_z)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int cyapa_gen6_bl_read_app_info(struct cyapa *cyapa)
> +{
> + u8 resp_data[PIP_BL_APP_INFO_RESP_LENGTH];
> + int resp_len;
> + int error;
> +
> + resp_len = sizeof(resp_data);
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
> + pip_bl_read_app_info, PIP_BL_READ_APP_INFO_CMD_LENGTH,
> + resp_data, &resp_len,
> + 500, cyapa_sort_tsg_pip_bl_resp_data, false);
> + if (error || resp_len < PIP_BL_APP_INFO_RESP_LENGTH ||
> + !PIP_CMD_COMPLETE_SUCCESS(resp_data))
> + return error ? error : -EIO;
> +
> + cyapa->fw_maj_ver = resp_data[8];
> + cyapa->fw_min_ver = resp_data[9];
> +
> + cyapa->platform_ver = (resp_data[12] >> PIP_BL_PLATFORM_VER_SHIFT) &
> + PIP_BL_PLATFORM_VER_MASK;
> +
> + memcpy(&cyapa->product_id[0], &resp_data[13], 5);
> + cyapa->product_id[5] = '-';
> + memcpy(&cyapa->product_id[6], &resp_data[18], 6);
> + cyapa->product_id[12] = '-';
> + memcpy(&cyapa->product_id[13], &resp_data[24], 2);
> + cyapa->product_id[15] = '\0';
> +
> + return 0;
> +
> +}
> +
> +static int cyapa_gen6_config_dev_irq(struct cyapa *cyapa, u8 cmd_code)
> +{
> + u8 cmd[] = { 0x04, 0x00, 0x05, 0x00, 0x2f, 0x00, cmd_code };
> + u8 resp_data[6];
> + int resp_len;
> + int error;
> +
> + resp_len = sizeof(resp_data);
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa, cmd, sizeof(cmd),
> + resp_data, &resp_len,
> + 500, cyapa_sort_tsg_pip_app_resp_data, false);
> + if (error || !VALID_CMD_RESP_HEADER(resp_data, cmd_code) ||
> + !PIP_CMD_COMPLETE_SUCCESS(resp_data)
> + )
> + return error < 0 ? error : -EINVAL;
> +
> + return 0;
> +}
> +
> +static int cyapa_gen6_change_power_state(struct cyapa *cyapa, u8 power_mode)
> +{
> + u8 cmd[] = { 0x04, 0x00, 0x06, 0x00, 0x2f, 0x00, 0x46, power_mode };
> + u8 resp_data[6];
> + int resp_len;
> + int error;
> +
> + resp_len = sizeof(resp_data);
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa, cmd, sizeof(cmd),
> + resp_data, &resp_len,
> + 500, cyapa_sort_tsg_pip_app_resp_data, false);
> + if (error || !VALID_CMD_RESP_HEADER(resp_data, 0x46))
> + return error < 0 ? error : -EINVAL;
> +
> + /* New power state applied in device not match the set power state. */
> + if (resp_data[5] != power_mode)
> + return -EAGAIN;
> +
> + return 0;
> +}
> +
> +static int cyapa_gen6_set_interval_setting(struct cyapa *cyapa,
> + struct gen6_interval_setting *interval_setting)
> +{
> + struct gen6_set_interval_cmd {
> + __le16 addr;
> + __le16 length;
> + u8 report_id;
> + u8 rsvd; /* Reserved, must be 0 */
> + u8 cmd_code;
> + __le16 active_interval;
> + __le16 lp1_interval;
> + __le16 lp2_interval;
> + } __packed set_interval_cmd;
> + u8 resp_data[11];
> + int resp_len;
> + int error;
> +
> + memset(&set_interval_cmd, 0, sizeof(set_interval_cmd));
> + put_unaligned_le16(PIP_OUTPUT_REPORT_ADDR, &set_interval_cmd.addr);
> + put_unaligned_le16(sizeof(set_interval_cmd) - 2,
> + &set_interval_cmd.length);
> + set_interval_cmd.report_id = PIP_APP_CMD_REPORT_ID;
> + set_interval_cmd.cmd_code = GEN6_SET_POWER_MODE_INTERVAL;
> + put_unaligned_le16(interval_setting->active_interval,
> + &set_interval_cmd.active_interval);
> + put_unaligned_le16(interval_setting->lp1_interval,
> + &set_interval_cmd.lp1_interval);
> + put_unaligned_le16(interval_setting->lp2_interval,
> + &set_interval_cmd.lp2_interval);
> +
> + resp_len = sizeof(resp_data);
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
> + (u8 *)&set_interval_cmd, sizeof(set_interval_cmd),
> + resp_data, &resp_len,
> + 500, cyapa_sort_tsg_pip_app_resp_data, false);
> + if (error ||
> + !VALID_CMD_RESP_HEADER(resp_data, GEN6_SET_POWER_MODE_INTERVAL))
> + return error < 0 ? error : -EINVAL;
> +
> + /* Get the real set intervals from response. */
> + interval_setting->active_interval = get_unaligned_le16(&resp_data[5]);
> + interval_setting->lp1_interval = get_unaligned_le16(&resp_data[7]);
> + interval_setting->lp2_interval = get_unaligned_le16(&resp_data[9]);
> +
> + return 0;
> +}
> +
> +static int cyapa_gen6_get_interval_setting(struct cyapa *cyapa,
> + struct gen6_interval_setting *interval_setting)
> +{
> + u8 cmd[] = { 0x04, 0x00, 0x05, 0x00, 0x2f, 0x00,
> + GEN6_GET_POWER_MODE_INTERVAL };
> + u8 resp_data[11];
> + int resp_len;
> + int error;
> +
> + resp_len = sizeof(resp_data);
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa, cmd, sizeof(cmd),
> + resp_data, &resp_len,
> + 500, cyapa_sort_tsg_pip_app_resp_data, false);
> + if (error ||
> + !VALID_CMD_RESP_HEADER(resp_data, GEN6_GET_POWER_MODE_INTERVAL))
> + return error < 0 ? error : -EINVAL;
> +
> + interval_setting->active_interval = get_unaligned_le16(&resp_data[5]);
> + interval_setting->lp1_interval = get_unaligned_le16(&resp_data[7]);
> + interval_setting->lp2_interval = get_unaligned_le16(&resp_data[9]);
> +
> + return 0;
> +}
> +
> +static int cyapa_gen6_deep_sleep(struct cyapa *cyapa, u8 state)
> +{
> + u8 ping[] = { 0x04, 0x00, 0x05, 0x00, 0x2f, 0x00, 0x00 };
> +
> + if (state == PIP_DEEP_SLEEP_STATE_ON)
> + /*
> + * Send ping command to notify device prepare for wake up
> + * when it's in deep sleep mode. At this time, device will
> + * response nothing except an I2C NAK.
> + */
> + cyapa_i2c_pip_write(cyapa, ping, sizeof(ping));
> +
> + return cyapa_pip_deep_sleep(cyapa, state);
> +}
> +
> +static int cyapa_gen6_set_power_mode(struct cyapa *cyapa,
> + u8 power_mode, u16 sleep_time)
> +{
> + struct device *dev = &cyapa->client->dev;
> + struct gen6_interval_setting *interval_setting =
> + &cyapa->gen6_interval_setting;
> + u8 lp_mode;
> + int error;
> +
> + if (cyapa->state != CYAPA_STATE_GEN6_APP)
> + return 0;
> +
> + if (PIP_DEV_GET_PWR_STATE(cyapa) == UNINIT_PWR_MODE) {
> + /*
> + * Assume TP in deep sleep mode when driver is loaded,
> + * avoid driver unload and reload command IO issue caused by TP
> + * has been set into deep sleep mode when unloading.
> + */
> + PIP_DEV_SET_PWR_STATE(cyapa, PWR_MODE_OFF);
> + }
> +
> + if (PIP_DEV_UNINIT_SLEEP_TIME(cyapa) &&
> + PIP_DEV_GET_PWR_STATE(cyapa) != PWR_MODE_OFF)
> + PIP_DEV_SET_SLEEP_TIME(cyapa, UNINIT_SLEEP_TIME);
> +
> + if (PIP_DEV_GET_PWR_STATE(cyapa) == power_mode) {
> + if (power_mode == PWR_MODE_OFF ||
> + power_mode == PWR_MODE_FULL_ACTIVE ||
> + power_mode == PWR_MODE_BTN_ONLY ||
> + PIP_DEV_GET_SLEEP_TIME(cyapa) == sleep_time) {
> + /* Has in correct power mode state, early return. */
> + return 0;
> + }
> + }
> +
> + if (power_mode == PWR_MODE_OFF) {
> + cyapa_gen6_config_dev_irq(cyapa, GEN6_DISABLE_CMD_IRQ);
> +
> + error = cyapa_gen6_deep_sleep(cyapa, PIP_DEEP_SLEEP_STATE_OFF);
> + if (error) {
> + dev_err(dev, "enter deep sleep fail: %d\n", error);
> + return error;
> + }
> +
> + PIP_DEV_SET_PWR_STATE(cyapa, PWR_MODE_OFF);
> + return 0;
> + }
> +
> + /*
> + * When trackpad in power off mode, it cannot change to other power
> + * state directly, must be wake up from sleep firstly, then
> + * continue to do next power sate change.
> + */
> + if (PIP_DEV_GET_PWR_STATE(cyapa) == PWR_MODE_OFF) {
> + error = cyapa_gen6_deep_sleep(cyapa, PIP_DEEP_SLEEP_STATE_ON);
> + if (error) {
> + dev_err(dev, "deep sleep wake fail: %d\n", error);
> + return error;
> + }
> + }
> +
> + /*
> + * Disable device assert interrupts for command response to avoid
> + * disturbing system suspending or hibernating process.
> + */
> + cyapa_gen6_config_dev_irq(cyapa, GEN6_DISABLE_CMD_IRQ);
> +
> + if (power_mode == PWR_MODE_FULL_ACTIVE) {
> + error = cyapa_gen6_change_power_state(cyapa,
> + GEN6_POWER_MODE_ACTIVE);
> + if (error) {
> + dev_err(dev, "change to active fail: %d\n", error);
> + goto out;
> + }
> +
> + PIP_DEV_SET_PWR_STATE(cyapa, PWR_MODE_FULL_ACTIVE);
> +
> + /* Sync the interval setting from device. */
> + cyapa_gen6_get_interval_setting(cyapa, interval_setting);
> +
> + } else if (power_mode == PWR_MODE_BTN_ONLY) {
> + error = cyapa_gen6_change_power_state(cyapa,
> + GEN6_POWER_MODE_BTN_ONLY);
> + if (error) {
> + dev_err(dev, "fail to button only mode: %d\n", error);
> + goto out;
> + }
> +
> + PIP_DEV_SET_PWR_STATE(cyapa, PWR_MODE_BTN_ONLY);
> + } else {
> + /*
> + * Gen6 internally supports to 2 low power scan interval time,
> + * so can help to switch power mode quickly.
> + * such as runtime suspend and system suspend.
> + */
> + if (interval_setting->lp1_interval == sleep_time) {
> + lp_mode = GEN6_POWER_MODE_LP_MODE1;
> + } else if (interval_setting->lp2_interval == sleep_time) {
> + lp_mode = GEN6_POWER_MODE_LP_MODE2;
> + } else {
> + if (interval_setting->lp1_interval == 0) {
> + interval_setting->lp1_interval = sleep_time;
> + lp_mode = GEN6_POWER_MODE_LP_MODE1;
> + } else {
> + interval_setting->lp2_interval = sleep_time;
> + lp_mode = GEN6_POWER_MODE_LP_MODE2;
> + }
> + cyapa_gen6_set_interval_setting(cyapa,
> + interval_setting);
> + }
> +
> + error = cyapa_gen6_change_power_state(cyapa, lp_mode);
> + if (error) {
> + dev_err(dev, "set power state to 0x%02x failed: %d\n",
> + lp_mode, error);
> + goto out;
> + }
> +
> + PIP_DEV_SET_SLEEP_TIME(cyapa, sleep_time);
> + PIP_DEV_SET_PWR_STATE(cyapa,
> + cyapa_sleep_time_to_pwr_cmd(sleep_time));
> + }
> +
> +out:
> + cyapa_gen6_config_dev_irq(cyapa, GEN6_ENABLE_CMD_IRQ);
> + return error;
> +}
> +
> +static int cyapa_gen6_initialize(struct cyapa *cyapa) { return 0; }
> +
> +static int cyapa_pip_retrieve_data_structure(struct cyapa *cyapa,
> + u16 read_offset, u16 read_len, u8 data_id,
> + u8 *data, int *data_buf_lens)
> +{
> + struct retrieve_data_struct_cmd {
> + struct pip_app_cmd_head head;
> + __le16 read_offset;
> + __le16 read_length;
> + u8 data_id;
> + } __packed cmd;
> + u8 resp_data[GEN6_MAX_RX_NUM + 10];
> + int resp_len;
> + int error;
> +
> + memset(&cmd, 0, sizeof(cmd));
> + put_unaligned_le16(PIP_OUTPUT_REPORT_ADDR, &cmd.head.addr);
> + put_unaligned_le16(sizeof(cmd), &cmd.head.length - 2);
> + cmd.head.report_id = PIP_APP_CMD_REPORT_ID;
> + cmd.head.cmd_code = PIP_RETRIEVE_DATA_STRUCTURE;
> + put_unaligned_le16(read_offset, &cmd.read_offset);
> + put_unaligned_le16(read_len, &cmd.read_length);
> + cmd.data_id = data_id;
> +
> + resp_len = sizeof(resp_data);
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
> + (u8 *)&cmd, sizeof(cmd),
> + resp_data, &resp_len,
> + 500, cyapa_sort_tsg_pip_app_resp_data,
> + true);
> + if (error || !PIP_CMD_COMPLETE_SUCCESS(resp_data) ||
> + resp_data[6] != data_id ||
> + !VALID_CMD_RESP_HEADER(resp_data, PIP_RETRIEVE_DATA_STRUCTURE))
> + return (error < 0) ? error : -EAGAIN;
> +
> + read_len = get_unaligned_le16(&resp_data[7]);
> + if (*data_buf_lens < read_len) {
> + *data_buf_lens = read_len;
> + return -ENOBUFS;
> + }
> +
> + memcpy(data, &resp_data[10], read_len);
> + *data_buf_lens = read_len;
> + return 0;
> +}
> +
> +static ssize_t cyapa_gen6_show_baseline(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct cyapa *cyapa = dev_get_drvdata(dev);
> + u8 data[GEN6_MAX_RX_NUM];
> + int data_len;
> + int size = 0;
> + int i;
> + int error;
> + int resume_error;
> +
> + if (!cyapa_is_pip_app_mode(cyapa))
> + return -EBUSY;
> +
> + /* 1. Suspend Scanning*/
> + error = cyapa_pip_suspend_scanning(cyapa);
> + if (error)
> + return error;
> +
> + /* 2. IDAC and RX Attenuator Calibration Data (Center Frequency). */
> + data_len = sizeof(data);
> + error = cyapa_pip_retrieve_data_structure(cyapa, 0, data_len,
> + GEN6_RETRIEVE_DATA_ID_RX_ATTENURATOR_IDAC,
> + data, &data_len);
> + if (error)
> + goto resume_scanning;
> +
> + size = scnprintf(buf, PAGE_SIZE, "%d %d %d %d %d %d ",
> + data[0], /* RX Attenuator Mutual */
> + data[1], /* IDAC Mutual */
> + data[2], /* RX Attenuator Self RX */
> + data[3], /* IDAC Self RX */
> + data[4], /* RX Attenuator Self TX */
> + data[5] /* IDAC Self TX */
> + );
> +
> + /* 3. Read Attenuator Trim. */
> + data_len = sizeof(data);
> + error = cyapa_pip_retrieve_data_structure(cyapa, 0, data_len,
> + GEN6_RETRIEVE_DATA_ID_ATTENURATOR_TRIM,
> + data, &data_len);
> + if (error)
> + goto resume_scanning;
> +
> + /* set attenuator trim values. */
> + for (i = 0; i < data_len; i++)
> + size += scnprintf(buf + size, PAGE_SIZE - size, "%d ", data[i]);
> + size += scnprintf(buf + size, PAGE_SIZE - size, "\n");
> +
> +resume_scanning:
> + /* 4. Resume Scanning*/
> + resume_error = cyapa_pip_resume_scanning(cyapa);
> + if (resume_error || error) {
> + memset(buf, 0, PAGE_SIZE);
> + return resume_error ? resume_error : error;
> + }
> +
> + return size;
> +}
> +
> +static int cyapa_gen6_operational_check(struct cyapa *cyapa)
> +{
> + struct device *dev = &cyapa->client->dev;
> + int error;
> +
> + if (cyapa->gen != CYAPA_GEN6)
> + return -ENODEV;
> +
> + switch (cyapa->state) {
> + case CYAPA_STATE_GEN6_BL:
> + error = cyapa_pip_bl_exit(cyapa);
> + if (error) {
> + /* Try to update trackpad product information. */
> + cyapa_gen6_bl_read_app_info(cyapa);
> + goto out;
> + }
> +
> + cyapa->state = CYAPA_STATE_GEN6_APP;
> +
> + case CYAPA_STATE_GEN6_APP:
> + /*
> + * If trackpad device in deep sleep mode,
> + * the app command will fail.
> + * So always try to reset trackpad device to full active when
> + * the device state is required.
> + */
> + error = cyapa_gen6_set_power_mode(cyapa,
> + PWR_MODE_FULL_ACTIVE, 0);
> + if (error)
> + dev_warn(dev, "%s: failed to set power active mode.\n",
> + __func__);
> +
> + /* Get trackpad product information. */
> + error = cyapa_gen6_read_sys_info(cyapa);
> + if (error)
> + goto out;
> + /* Only support product ID starting with CYTRA */
> + if (memcmp(cyapa->product_id, product_id,
> + strlen(product_id)) != 0) {
> + dev_err(dev, "%s: unknown product ID (%s)\n",
> + __func__, cyapa->product_id);
> + error = -EINVAL;
> + }
> + break;
> + default:
> + error = -EINVAL;
> + }
> +
> +out:
> + return error;
> +}
> +
> +const struct cyapa_dev_ops cyapa_gen6_ops = {
> + .check_fw = cyapa_pip_check_fw,
> + .bl_enter = cyapa_pip_bl_enter,
> + .bl_initiate = cyapa_pip_bl_initiate,
> + .update_fw = cyapa_pip_do_fw_update,
> + .bl_activate = cyapa_pip_bl_activate,
> + .bl_deactivate = cyapa_pip_bl_deactivate,
> +
> + .show_baseline = cyapa_gen6_show_baseline,
> + .calibrate_store = cyapa_pip_do_calibrate,
> +
> + .initialize = cyapa_gen6_initialize,
> +
> + .state_parse = cyapa_pip_state_parse,
> + .operational_check = cyapa_gen6_operational_check,
> +
> + .irq_handler = cyapa_pip_irq_handler,
> + .irq_cmd_handler = cyapa_pip_irq_cmd_handler,
> + .sort_empty_output_data = cyapa_empty_pip_output_data,
> + .set_power_mode = cyapa_gen6_set_power_mode,
> +};
> --
> 1.9.1
>
>
> ---------------------------------------------------------------
> This message and any attachments may contain Cypress (or its
> subsidiaries) confidential information. If it has been received
> in error, please advise the sender and immediately delete this
> message.
> ---------------------------------------------------------------
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
