Add DCU node, DCU is a display controller of Freescale
named 2D-ACE.
Signed-off-by: Alison Wang <b18965@xxxxxxxxxxxxx>
Signed-off-by: Xiubo Li <lixiubo@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@xxxxxxxxx>
Reviewed-by: Alison Wang <alison.wang@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/ls1021a.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c70bb27..6d6e3e2 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -383,6 +383,16 @@
<&platform_clk 1>;
};
+ dcu: dcu@2ce0000 {
+ compatible = "fsl,ls1021a-dcu";
+ reg = <0x0 0x2ce0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 0>;
+ clock-names = "dcu";
+ big-endian;
+ status = "disabled";
+ };
+
mdio0: mdio@2d24000 {
compatible = "gianfar";
device_type = "mdio";
--
2.1.0.27.g96db324
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
