From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
New bindings document for simple fpga bus.
Signed-off-by: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
---
.../Documentation/bindings/simple-fpga-bus.txt | 61 ++++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 drivers/staging/fpga/Documentation/bindings/simple-fpga-bus.txt
diff --git a/drivers/staging/fpga/Documentation/bindings/simple-fpga-bus.txt b/drivers/staging/fpga/Documentation/bindings/simple-fpga-bus.txt
new file mode 100644
index 0000000..221e781
--- /dev/null
+++ b/drivers/staging/fpga/Documentation/bindings/simple-fpga-bus.txt
@@ -0,0 +1,61 @@
+Simple FPGA Bus
+===============
+
+A Simple FPGA Bus is a bus that handles configuring an FPGA and its bridges
+before populating the devices below its node.
+
+Required properties:
+- compatible : should contain "simple-fpga-bus"
+- #address-cells, #size-cells, ranges: must be present to handle address space
+ mapping for children.
+
+Optional properties:
+- fpga-mgr : should contain a phandle to a fpga manager.
+- fpga-firmware : should contain the name of a fpga image file located on the
+ firmware search path.
+- partial-reconfig : boolean property should be defined if partial
+ reconfiguration is to be done.
+- resets : should contain a list of resets that should be released after the
+ fpga has been programmed i.e. fpga bridges.
+- reset-names : should contain a list of the names of the resets.
+
+Example:
+
+/dts-v1/;
+/plugin/;
+/ {
+ fragment@0 {
+ target-path="/soc";
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bridge@0xff200000 {
+ compatible = "simple-fpga-bus";
+ #address-cells = <0x2>;
+ #size-cells = <0x1>;
+ ranges = <0x1 0x10040 0xff210040 0x20>;
+
+ clocks = <0x2 0x2>;
+ clock-names = "h2f_lw_axi_clock", "f2h_sdram0_clock";
+
+ fpga-mgr = <&hps_0_fpgamgr>;
+ fpga-firmware = "soc_system.rbf";
+
+ resets = <&hps_fpgabridge0 0>, <&hps_fpgabridge1 0>, <&hps_fpgabridge2 0>;
+ reset-names = "hps2fpga", "lwhps2fpga", "fpga2hps";
+
+ gpio@0x100010040 {
+ compatible = "altr,pio-14.0", "altr,pio-1.0";
+ reg = <0x1 0x10040 0x20>;
+ clocks = <0x2>;
+ altr,gpio-bank-width = <0x4>;
+ resetvalue = <0x0>;
+ #gpio-cells = <0x2>;
+ gpio-controller;
+ };
+ };
+ };
+ };
+};
+
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
