Add the required DT binding documentation for the Marvell PMU driver.
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/soc/dove/pmu.txt | 56 ++++++++++++++++++++++
1 file changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/dove/pmu.txt
diff --git a/Documentation/devicetree/bindings/soc/dove/pmu.txt b/Documentation/devicetree/bindings/soc/dove/pmu.txt
new file mode 100644
index 000000000000..edd40b796b74
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/dove/pmu.txt
@@ -0,0 +1,56 @@
+Device Tree bindings for Marvell PMU
+
+Required properties:
+ - compatible: value should be "marvell,dove-pmu".
+ May also include "simple-bus" if there are child devices, in which
+ case the ranges node is required.
+ - reg: two base addresses and sizes of the PM controller and PMU.
+ - interrupts: single interrupt number for the PMU interrupt
+ - interrupt-controller: must be specified as the PMU itself is an
+ interrupt controller.
+ - #interrupt-cells: must be 1.
+ - #reset-cells: must be 1.
+ - domains: sub-node containing domain descriptions
+
+Optional properties:
+ - ranges: defines the address mapping for child devices, as per the
+ standard property of this name. Required when compatible includes
+ "simple-bus".
+
+Power domain descriptions are listed as child nodes of the "domains"
+sub-node. Each domain has the following properties:
+
+Required properties:
+ - #power-domain-cells: must be 0.
+
+Optional properties:
+ - marvell,pmu_pwr_mask: specifies the mask value for PMU power register
+ - marvell,pmu_iso_mask: specifies the mask value for PMU isolation register
+ - resets: points to the reset manager (PMU node) and reset index.
+
+Example:
+
+ pmu: power-management@d0000 {
+ compatible = "marvell,dove-pmu";
+ reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+ interrupts = <33>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #reset-cells = <1>;
+
+ domains {
+ vpu_domain: vpu-domain {
+ #power-domain-cells = <0>;
+ marvell,pmu_pwr_mask = <0x00000008>;
+ marvell,pmu_iso_mask = <0x00000001>;
+ resets = <&pmu 16>;
+ };
+
+ gpu_domain: gpu-domain {
+ #power-domain-cells = <0>;
+ marvell,pmu_pwr_mask = <0x00000004>;
+ marvell,pmu_iso_mask = <0x00000002>;
+ resets = <&pmu 18>;
+ };
+ };
+ };
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
