* Arun Bharadwaj <arun@xxxxxxxxxxx> [150604 11:10]:
> From: Adam YH Lee <adam.yh.lee@xxxxxxxxx>
>
> Audio-in was incorrectly routed to Line In. It should be Mic3L as per
> schematic.
>
> Using mic-bias voltage at 2.0v (<0x1>) does not work for some reason. There
> is no voltage seen on micbias (R127). Mic-bias voltage of 2.5v (<0x2>) works.
> I see voltage of 2.475v across GND and micbias.
>
> With these changes, I can record audio with a pair of proliferate TRRS earbuds.
>
> Signed-off-by: Ash Charles <ashcharles@xxxxxxxxx>
Can you please repost this with after checking From
and Signed-off-by?
Regards,
Tony
> ---
> arch/arm/boot/dts/am335x-pepper.dts | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
> index 0d35ab6..473d8ee 100644
> --- a/arch/arm/boot/dts/am335x-pepper.dts
> +++ b/arch/arm/boot/dts/am335x-pepper.dts
> @@ -74,6 +74,7 @@
> audio_codec: tlv320aic3106@1b {
> compatible = "ti,tlv320aic3106";
> reg = <0x1b>;
> + ai3x-micbias-vg = <0x2>;
> };
>
> accel: lis331dlh@1d {
> @@ -153,7 +154,7 @@
> ti,audio-routing =
> "Headphone Jack", "HPLOUT",
> "Headphone Jack", "HPROUT",
> - "LINE1L", "Line In";
> + "MIC3L", "Mic3L Switch";
> };
>
> &mcasp0 {
> --
> 2.1.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
